Name: ESP32-CAM-MB Micro USB Programmer Base Board
SKU: VE-122
Availability: InStock

ESP32-CAM-MB Micro USB Programmer Base Board

Technical Specifications

Characteristic	Specification Parameters
Compatible Companion Hardware	AI-Thinker Form-Factor ESP32-CAM W/ OV2640 / OV3660
USB Communication Port	Micro-USB or USB Type-C Interfacing (Variant dependent)
Onboard USB-to-Serial Driver	Silicon Labs CH340 Series (CH340G / CH340C)
Input Supply Voltage (VBUS)	5.0V DC via USB Bus line
Onboard Voltage Regulation	Drops 5V down to 3.3V Output (Feeds ESP32-CAM power tracks)
Hardware Buttons Profile	1× Reset Button, 1× Boot Button (Varies by hardware revision)
Physical Dimensions (approx.)	40 mm × 27 mm × 16 mm

SKU: VE-122 Categories: Camera Module, ESP

The ESP32-CAM-MB Micro USB Programmer Base Board is a custom daughter-shield adapter designed specifically to streamline the code-flashing and power delivery process for the standalone ESP32-CAM module. Because standard ESP32-CAM modules lack an integrated USB port, developers historically relied on cumbersome manual jumper wiring and external FTDI USB-to-TTL breakout tools to load code. This base board completely eliminates that hassle by acting as a direct plug-and-play cradle, adding a standardized USB port, an automated bootloader circuit, and dedicated control buttons.

✨ Key Features

Integrated Hardware Serial Converter: Populated with an onboard CH340G or CH340C USB-to-UART bridge chip to establish clean serial terminal pipelines over a single cable.
Zero-Jumper Auto-Flash Sequencing: Features an automatic data-line strapping circuit that handles the BOOT (GPIO 0 to GND) transition automatically, allowing one-click uploads from software IDEs.
Dedicated Onboard Micro-Tactile Switches: Outfitted with a physical mechanical Reset (RST) button and sometimes a Boot switch to allow manual runtime reboots and flashing entry overrides.
Stable Dual-Stage Power Conditioning: Includes onboard step-down low-dropout (LDO) linear regulators that convert standard 5V USB line power into a clean, high-current 3.3V rail.

-20%

Click to enlarge

Back to products

Original price was: ₹150.00.Current price is: ₹120.00.

Characteristic	Specification Parameters
Compatible Companion Hardware	AI-Thinker Form-Factor ESP32-CAM W/ OV2640 / OV3660
USB Communication Port	Micro-USB or USB Type-C Interfacing (Variant dependent)
Onboard USB-to-Serial Driver	Silicon Labs CH340 Series (CH340G / CH340C)
Input Supply Voltage (VBUS)	5.0V DC via USB Bus line
Onboard Voltage Regulation	Drops 5V down to 3.3V Output (Feeds ESP32-CAM power tracks)
Hardware Buttons Profile	1× Reset Button, 1× Boot Button (Varies by hardware revision)
Physical Dimensions (approx.)	40 mm × 27 mm × 16 mm

Compare

Add to wishlist

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ESP32-CAM-MB Micro USB Programmer Base Board”

Shipping & Delivery

Related products

-25%

OV7670 VGA Camera Image Sensor Module

Camera Module

Characteristic	Specification Parameters
Image Core IC	OmniVision OV7670 CMOS Image Sensor Array
Maximum Pixel Resolution	640 × 480 Pixels (VGA format framework)
Maximum Frame Rate	30 fps at VGA resolution / Up to 60 fps at CIF (352 × 288) resolution
Operating Voltage (VDD)	2.5V to 3.0V DC (Breakout board usually integrates a 3.3V safe regulator)
Power Consumption Profile	60 mW active state / < 20 µA deep-sleep standby mode
Optical Lens Array Size	1/6 inch sensor format with a 25° field of view (FOV)
Internal Signal-to-Noise	46 dB maximum dynamic range

Add to cart

Quick view

-17%

ESP32 NodeMCU Wi-Fi + Bluetooth Development Board 30 pin

ESP

Characteristic	Specification Parameters
Microprocessor Core	Xtensa Dual-Core 32-bit LX6 Microprocessor (Up to 240 MHz)
Memory Capacity	520 KB SRAM / 4 MB External Flash Storage Memory
Wireless Protocols	Wi-Fi 802.11 b/g/n (Up to 150 Mbps) + Bluetooth v4.2 & BLE
Logic Working Voltage	3.3V DC (Onboard 1117 regulator accepts 5V USB input)
GPIO Interface Array	30-Pin layout with multi-functional breakout mappings
USB-UART Interface	Onboard Silabs CP2102 USB-to-Serial converter chip
Module Dimensions	Approx. 51 mm × 28 mm × 13 mm (Breadboard friendly)

-21%

ESP8266 ESP-01 Serial Wi-Fi Transceiver Module

Characteristic	Specification Parameters
Core Processor	Tensilica 32-bit RISC CPU Xtensa LX106 (Clocked at 80 MHz)
Onboard Flash Memory	512 KB to 1 MB SPI Flash (Variant dependent)
Operating Voltage (VCC)	Strictly 3.3V DC (Inputs are not 5V tolerant)
Current Consumption	~70 mA average (Spikes up to 200 mA during wireless transmission)
Wi-Fi Protocol Standard	IEEE 802.11 b/g/n (Operating at 2.4 GHz frequency band)
Output Power Capability	+19.5 dBm in 802.11b operational mode
Module Outer Dimensions	Approx. 25 mm × 15 mm × 11 mm

-15%

Raspberry Pi NoIR Camera Module 3 (12MP Night Vision).

Technical Specification Details

Parameter	Specification Details
Image Sensor Hardware	Sony IMX708 Back-Illuminated CMOS Sensor Array
Native Frame Resolution	11.9 Megapixels
Max Image Array Dimensions	4608 × 2592 Pixels (Native 16:9 aspect ratio)
Supported Video Formats	1080p @ 50fps \| 720p @ 100fps \| VGA @ 120fps
Focus Mechanism	Phase Detection Autofocus (PDAF) + Contrast Autofocus
Aperture & Focal Length	F1.8 Aperture \| 4.74mm Focal Length
Field of View (FoV)	66° Horizontal \| 41° Vertical (75° Diagonal)
High Dynamic Range (HDR)	Supported (up to 3MP output resolution in HDR mode)
Physical Dimensions	25.0 mm × 24.0 mm × 11.5 mm

5MP Camera Module for Raspberry Pi

Advanced Data Sheet Specifications

Parameter	Specification Details
Image Sensor Core	OmniVision OV5647 CMOS Sensor
Native Resolution	5 Megapixels
Max Static Image Size	2592 × 1944 Pixels
Supported Video Modes	1080p @ 30fps \| 720p @ 60fps \| 480p @ 90fps
Optical Sensor Size	1/4-inch format
Aperture & FOV	f/2.9 Aperture \| 54-degree Horizontal Field of View
Lens Focal Type	Fixed Focus
Connection Port	15-pin MIPI Camera Serial Interface (CSI)
Physical Dimensions	25 mm × 23 mm × 9 mm

-18%

ESP8266 ESP-12E Serial Wi-Fi Transceiver Module

Characteristic	Specification Parameters
Core Processor	Tensilica L106 32-bit RISC Microprocessor Core
Operating Frequency	80 MHz (Configurable / overclockable up to 160 MHz)
Storage Memory Space	4 MB (32 Mbits) SPI Flash Memory storage buffer
Operating Voltage (VCC)	3.0V to 3.6V DC (Requires stable 3.3V power supply rail)
Logic Signal Threshold	3.3V TTL (Pins are not 5V logic safe)
Wireless standard	2.4 GHz Wi-Fi IEEE 802.11 b/g/n (STA / AP / STA+AP modes)
Peripheral Interfaces	10-bit ADC, SPI, H-SPI, UART, I2C, I2S, IRDA, PWM

ESP32-C3 Mini Development Board

Characteristic	Specification Parameters
Microprocessor Core	Espressif ESP32-C3 32-bit RISC-V Single-Core (Up to 160 MHz)
On-Chip Memory Array	400 KB SRAM / 384 KB ROM / 4 MB Onboard Flash
Wireless Transceivers	2.4 GHz Wi-Fi 4 (802.11 b/g/n) + Bluetooth 5.0 & BLE
Operating Voltage	3.3V DC Logic level (Internal regulator converts input power)
External Power Input	5V via USB-C or 3.3V to 6.0V via VIN pin
Peripheral Interfacing	11 Accessible GPIOs, 6-ch PWM, 2× 12-bit ADCs, SPI, I2C, UART
Module Dimensions	Approx. 22.5 mm × 18 mm (Super-mini form factor)

-16%

ESP32 NodeMCU 38-Pin Development Board

Characteristic	Specification Parameters
Microprocessor Core	Xtensa Dual-Core 32-bit LX6 Architecture (Up to 240 MHz)
Memory Capacity	520 KB SRAM / 4 MB SPI Flash Memory
Wireless Protocols	Wi-Fi 802.11 b/g/n + Bluetooth v4.2 BR/EDR & BLE
Logic Voltage Level	3.3V DC (Inputs are not 5V tolerant)
Input Supply Limits	5.0V DC via Micro-USB or 5.0V to 9.0V DC via Vin pin
USB-Serial Chipset	CP2102 or CH340 USB-to-UART Bridge controller
Module Frame Footprint	Approx. 55 mm × 28 mm × 13 mm (Slightly longer form factor)