Name: ESP32-C3 Mini Development Board
SKU: VE-114
Availability: InStock

ESP32-C3 Mini Development Board

Technical Specifications

Characteristic	Specification Parameters
Microprocessor Core	Espressif ESP32-C3 32-bit RISC-V Single-Core (Up to 160 MHz)
On-Chip Memory Array	400 KB SRAM / 384 KB ROM / 4 MB Onboard Flash
Wireless Transceivers	2.4 GHz Wi-Fi 4 (802.11 b/g/n) + Bluetooth 5.0 & BLE
Operating Voltage	3.3V DC Logic level (Internal regulator converts input power)
External Power Input	5V via USB-C or 3.3V to 6.0V via VIN pin
Peripheral Interfacing	11 Accessible GPIOs, 6-ch PWM, 2× 12-bit ADCs, SPI, I2C, UART
Module Dimensions	Approx. 22.5 mm × 18 mm (Super-mini form factor)

SKU: VE-114 Category: ESP

The ESP32-C3 Mini Development Board is an ultra-compact, thumb-sized internet-of-things (IoT) microcontroller designed for small-scale smart devices. Shifting away from legacy architecture, it is powered by an advanced open-source 32-bit RISC-V single-core processor. It integrates full 2.4 GHz Wi-Fi and Bluetooth 5.0 (LE) into a microscopic, single-sided PCB footprint. Outfitted with a modern USB Type-C connector, it is highly optimized for ultra-low power consumption, making it the premier choice for wireless wearables, compact edge sensors, and smart keychains.

✨ Key Features

Next-Gen RISC-V Architecture: Driven by a modern, single-core 32-bit RISC-V open standard instruction-set processor clocking up to 160 MHz.
Upgraded Bluetooth 5.0 (LE): Supports long-range and high-throughput Bluetooth 5.0 Low Energy mesh configurations for low-latency pairing.
Microscopic Space-Saving Profile: Features a miniature single-sided layout that lets you mount the controller flat onto other carrier boards or fit it into tight enclosures.
Extreme Battery Efficiency: Draws an exceptionally low current of just ~43µA during deep-sleep states, maximizing battery-powered life cycle runtimes

-17%

Click to enlarge

Back to products

Original price was: ₹300.00.Current price is: ₹250.00.

Characteristic	Specification Parameters
Microprocessor Core	Espressif ESP32-C3 32-bit RISC-V Single-Core (Up to 160 MHz)
On-Chip Memory Array	400 KB SRAM / 384 KB ROM / 4 MB Onboard Flash
Wireless Transceivers	2.4 GHz Wi-Fi 4 (802.11 b/g/n) + Bluetooth 5.0 & BLE
Operating Voltage	3.3V DC Logic level (Internal regulator converts input power)
External Power Input	5V via USB-C or 3.3V to 6.0V via VIN pin
Peripheral Interfacing	11 Accessible GPIOs, 6-ch PWM, 2× 12-bit ADCs, SPI, I2C, UART
Module Dimensions	Approx. 22.5 mm × 18 mm (Super-mini form factor)

Compare

Add to wishlist

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ESP32-C3 Mini Development Board”

Shipping & Delivery

Related products

-13%

ESP32-S3 DevKitC-1 WiFi + Bluetooth Development Board

ESP

Characteristic	Specification Parameters
Microprocessor Core	Xtensa Dual-Core 32-bit LX7 Processor (Up to 240 MHz)
On-Chip Memory Array	512 KB Internal SRAM / 384 KB ROM
External Module Memory	8 MB Flash + 8 MB PSRAM (Standard N8R8 variant configuration)
Wireless Transceivers	2.4 GHz Wi-Fi 4 (802.11 b/g/n) + Bluetooth 5.0 LE & Mesh
Logic Working Voltage	3.3V DC (Onboard dynamic regulators step down external input)
Power Input Interface	Dual USB Type-C ports (1× USB-to-UART, 1× Native USB OTG)
Module Dimensions	Approx. 57 mm × 28 mm × 10 mm

Add to cart

Quick view

-20%

NodeMCU ESP8266 CH340 Wi-Fi Development Board

Characteristic	Specification Parameters
Core Processor	Tensilica 32-bit RISC CPU Xtensa LX106 (80 MHz to 160 MHz)
Storage Capacity	4 MB (32 Mbit) SPI Flash Memory / 64 KB SRAM
USB-UART Bridge	CH340 Serial Converter Chip
Operating Voltage	3.3V DC Internal Logic (Onboard regulator steps down 5V USB input)
Digital I/O Layout	16 General Purpose Input/Output Pins (supports PWM and 1-ch ADC)
Wi-Fi Networking	IEEE 802.11 b/g/n (Supports Station, Soft-AP, and Dual modes)
Dimensions (approx.)	58 mm × 31 mm × 13 mm (Wider V3/Lolin form factor)

-16%

ESP32 NodeMCU 38-Pin Development Board

Characteristic	Specification Parameters
Microprocessor Core	Xtensa Dual-Core 32-bit LX6 Architecture (Up to 240 MHz)
Memory Capacity	520 KB SRAM / 4 MB SPI Flash Memory
Wireless Protocols	Wi-Fi 802.11 b/g/n + Bluetooth v4.2 BR/EDR & BLE
Logic Voltage Level	3.3V DC (Inputs are not 5V tolerant)
Input Supply Limits	5.0V DC via Micro-USB or 5.0V to 9.0V DC via Vin pin
USB-Serial Chipset	CP2102 or CH340 USB-to-UART Bridge controller
Module Frame Footprint	Approx. 55 mm × 28 mm × 13 mm (Slightly longer form factor)

-22%

NodeMCU ESP8266 CP2102 Wi-Fi Development Board

Characteristic	Specification Parameters
Core Processor	Tensilica 32-bit RISC CPU Xtensa LX106 (Clocked at 80 MHz to 160 MHz)
Storage Capacity	4 MB (32 Mbit) SPI Flash Memory / 64 KB SRAM
USB-UART Bridge	Silicon Labs CP2102 Chip
Operating Voltage	3.3V DC internal logic (Onboard LDO regulates 5V USB input)
Digital I/O Layout	16 General Purpose Input/Output Pins (including PWM and 1-ch ADC)
Wi-Fi Networking	IEEE 802.11 b/g/n (Supports Station, Soft-AP, and Dual modes)
Dimensions (approx.)	49 mm × 24.5 mm × 13 mm

-21%

ESP8266 ESP-01 Serial Wi-Fi Transceiver Module

Characteristic	Specification Parameters
Core Processor	Tensilica 32-bit RISC CPU Xtensa LX106 (Clocked at 80 MHz)
Onboard Flash Memory	512 KB to 1 MB SPI Flash (Variant dependent)
Operating Voltage (VCC)	Strictly 3.3V DC (Inputs are not 5V tolerant)
Current Consumption	~70 mA average (Spikes up to 200 mA during wireless transmission)
Wi-Fi Protocol Standard	IEEE 802.11 b/g/n (Operating at 2.4 GHz frequency band)
Output Power Capability	+19.5 dBm in 802.11b operational mode
Module Outer Dimensions	Approx. 25 mm × 15 mm × 11 mm

ESP32 NodeMCU Wi-Fi + Bluetooth Development Board 30 pin

Characteristic	Specification Parameters
Microprocessor Core	Xtensa Dual-Core 32-bit LX6 Microprocessor (Up to 240 MHz)
Memory Capacity	520 KB SRAM / 4 MB External Flash Storage Memory
Wireless Protocols	Wi-Fi 802.11 b/g/n (Up to 150 Mbps) + Bluetooth v4.2 & BLE
Logic Working Voltage	3.3V DC (Onboard 1117 regulator accepts 5V USB input)
GPIO Interface Array	30-Pin layout with multi-functional breakout mappings
USB-UART Interface	Onboard Silabs CP2102 USB-to-Serial converter chip
Module Dimensions	Approx. 51 mm × 28 mm × 13 mm (Breadboard friendly)

-19%

ESP32-CAM Wi-Fi + Bluetooth Camera Development Module

Camera Module, ESP

Characteristic	Specification Parameters
Core Processor	Tensilica 32-bit RISC CPU Xtensa Dual-Core LX6 (Up to 240 MHz)
Memory Buffer	520 KB Internal SRAM + 4 MB External PSRAM (Required for image buffering)
Wireless Transceivers	2.4 GHz Wi-Fi (802.11b/g/n) + Bluetooth v4.2 BR/EDR & BLE standard
Supported Image Sensors	OV2640 (Standard choice) and OV7670 camera modules
Maximum Resolution	1600 × 1200 Pixels (UXGA resolution framework)
Storage Socket Type	Onboard MicroSD Card Slot (Supports SPI communication paths)
Default Image Output	JPEG, BMP, Grayscale formats

-18%

ESP8266 ESP-12E Serial Wi-Fi Transceiver Module

Characteristic	Specification Parameters
Core Processor	Tensilica L106 32-bit RISC Microprocessor Core
Operating Frequency	80 MHz (Configurable / overclockable up to 160 MHz)
Storage Memory Space	4 MB (32 Mbits) SPI Flash Memory storage buffer
Operating Voltage (VCC)	3.0V to 3.6V DC (Requires stable 3.3V power supply rail)
Logic Signal Threshold	3.3V TTL (Pins are not 5V logic safe)
Wireless standard	2.4 GHz Wi-Fi IEEE 802.11 b/g/n (STA / AP / STA+AP modes)
Peripheral Interfaces	10-bit ADC, SPI, H-SPI, UART, I2C, I2S, IRDA, PWM