Name: XL4016 DC 10A 300W Step Down Buck Converter
SKU: VE-135
Availability: InStock

XL4016 DC 10A 300W Step Down Buck Converter

Technical Specifications

Characteristic	Specification Parameters
Converter Circuit Core	XL4016E1 Non-Isolated Buck Switching Regulator
Input Supply Voltage (VIN)	7.0V to 40.0V DC (Input must be higher than target output)
Adjustable Output (VOUT)	1.2V to 35.0V DC (Continuously variable via CV trimmer)
Output Current Capacity	0.2A to 8A Continuous (Hits up to 10A Maximum with active fan cooling)
Maximum Output Power	Up to 300W Peak Performance Capacity
Fixed Switching Frequency	180 kHz / 300 kHz (Depending on exact board revision)
Output Voltage Ripple	~50 mV peak-to-peak frequency ripple
Chassis Dimensions	Approx. 65 mm × 47 mm × 24 mm

SKU: VE-135 Category: Converters

The XL4016 10A 300W DC-DC Step-Down Buck Converter Module is a high-power switching regulator board engineered to lower high DC input voltages down to a stable, lower DC output voltage. Driven by the monolithic XL4016E1 buck chip, this heavy-duty variant is equipped with a Dual-Trimpot Constant Current (CC) and Constant Voltage (CV) adjustment layout. Capable of outputting up to 300W of raw power, it is a premier solution across India for creating variable laboratory bench power supplies, driving high-wattage LED arrays, and charging custom lithium or lead-acid batteries.

✨ Key Features

Dual CC/CV Control Function: Populated with two independent multi-turn trimmer potentiometers to control both the output voltage ceiling and the maximum threshold current. [
Massive 300W Power Delivery: Delivers a high-wattage output capability that easily powers heavy inductive or resistive loads.
Heavy Double-Heatsink Layout: Outfitted with two dedicated aluminum cooling blocks mounted directly to the switching chip and Schottky rectifier diode to optimize thermal transfer.
High-Efficiency Energy Switching: Operates with a high-speed internal PWM tracking layout that hits power conversion efficiencies up to 95%, keeping heat generation low.

-25%

Click to enlarge

Back to products

Original price was: ₹400.00.Current price is: ₹300.00.

Characteristic	Specification Parameters
Converter Circuit Core	XL4016E1 Non-Isolated Buck Switching Regulator
Input Supply Voltage (VIN)	7.0V to 40.0V DC (Input must be higher than target output)
Adjustable Output (VOUT)	1.2V to 35.0V DC (Continuously variable via CV trimmer)
Output Current Capacity	0.2A to 8A Continuous (Hits up to 10A Maximum with active fan cooling)
Maximum Output Power	Up to 300W Peak Performance Capacity
Fixed Switching Frequency	180 kHz / 300 kHz (Depending on exact board revision)
Output Voltage Ripple	~50 mV peak-to-peak frequency ripple
Chassis Dimensions	Approx. 65 mm × 47 mm × 24 mm

Compare

Add to wishlist

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “XL4016 DC 10A 300W Step Down Buck Converter”

Shipping & Delivery

Related products

PL2303 USB to TTL Serial Converter Cable

Converters

Characteristic	Specification Parameters
Embedded Controller IC	Prolific Technology PL2303HX / PL2303TA / PL2303GS
Host Computer Port	Standard USB Type-A Male Interface
Cable Length Profile	Approximately 1.0 Meter (3.3 Feet)
Logic Signal Threshold	3.3V TTL Level Logic (Standard model assignment)
Integrated Power Output	Fixed 5.0V DC output path pulled from host USB port
Supported Baud Rates	300 bps up to 1 Mbps or 6 Mbps (Depending on PL2303 generation)
Wire Terminal Interface	4 Pin Individual Female JST/Dupont Receptacles

Add to cart

Quick view

CN6009 / XL6009 DC-DC Adjustable Step-Up Boost Converter Module

Characteristic	Specification Parameters
Converter Circuit Topology	Non-Isolated Step-Up Boost Regulator
Input Supply Voltage (VIN)	3.0V to 32.0V DC (Optimal performance configuration begins at 5.0V)
Adjustable Output (VOUT)	5.0V to 35.0V DC (Output voltage must remain higher than input)
Switch Output Current Limit	4.0A Maximum peak load tracking current (Continuous output rated at 2.0A–3.0A without external cooling)
Fixed Internal Clock	400 kHz Switching Frequency
Maximum Efficiency Profile	Up to 94% Conversion Performance
Output Ripple Voltage	~50 mV to 100 mV peak-to-peak frequency ripple
Chassis Main Dimensions	Approx. 43 mm × 21 mm × 14 mm

CH340 USB to TTL Serial Converter Module

Characteristic	Specification Parameters
Core Controller IC	Jiangsu Qinheng Co. (WCH) CH340G / CH340C / CH340E
Physical Input Interface	USB Type-A Male, Micro-USB, or USB Type-C Female Port
Supported Baud Rates	50 bps up to 2 Mbps full hardware speed matching
Signal Logic Threshold	3.3V and 5.0V TTL levels (Jumper or Switch configurable)
Onboard Power Outputs	Direct 5V (USB Bus supply) and an integrated 3.3V power rail line
Hardware Handshaking	Full modem interface support pins (DTR, RTS) broken out on select boards
Module Outer Dimensions	Approx. 38 mm × 16 mm × 11 mm (Standard stick form factor)

CP2102 USB to TTL Serial Converter Module 6-pin (Black PCB Edition)

Characteristic	Specification Parameters
Core Protocol Chipset	Silicon Labs CP2102 USB-to-UART Bridge Controller
PCB Soldermask Color	Matte Black / Glossy Black
PC Input Connector	Standard USB Type-A Male Interface
Data Rate Range	300 bps up to 1.0 Mbps or 1.5 Mbps stable operations
Internal Data Buffers	512-Byte Receive Buffer / 640-Byte Transmit Buffer
Logic Signal Voltage	3.3V TTL Level Logic (Inputs are safely 5V tolerant)
Module Length & Width	Approx. 42 mm × 15 mm

CP2102 USB to TTL Serial Converter Module

Characteristic	Specification Parameters
Core Controller IC	Silicon Labs CP2102 USB-to-UART Bridge
Physical Input Interface	Micro-USB, Mini-USB, or Type-C Female Port (Variant dependent)
Supported Transfer Rates	300 bps up to 1 Mbps full hardware speed matching
Signal Logic Threshold	3.3V TTL Logic (Inputs are safely 5V tolerant)
Onboard Voltage Outputs	3.3V DC (up to 100mA max) and 5.0V DC (up to 500mA with self-resetting fuse)
Integrated Hardware Buffer	512-byte receive buffer and 512-byte transmit buffer
Module Outer Dimensions	Approx. 26 mm × 15 mm × 11 mm (Ultra-compact form factor)

PL2303 USB to TTL Serial Converter Module

Characteristic	Specification Parameters
Core Controller IC	Prolific Technology PL2303 / PL2303HX / PL2303TA
Physical Input Interface	USB Type-A Male Plug
Supported Transmission Rates	300 bps up to 1 Mbps standard matching speed limits
Logic Threshold Level	3.3V / 5.0V Dual TTL compatible signals
Power Output Delivery	3.3V DC and 5.0V DC output paths
Data Transmission Buffers	128-byte inbound buffer / 256-byte outbound buffer
Status Monitoring	2 Onboard LEDs for real-time TX and RX traffic logging

-38%

LM2596 DC-DC Buck Converter Step-Down Module

Characteristic	Specification Parameters
Regulator Topology	Monolithic Step-Down (Buck) Switching Regulator
Input Supply Voltage (VIN)	4.0V to 40.0V DC (Input must be at least 1.5V higher than output)
Adjustable Output (VOUT)	1.23V to 35.0V DC (Continuously variable)
Continuous Output Current	Up to 2.0A stable (Up to 3.0A maximum peak with an attached heatsink)
Fixed Internal Frequency	150 kHz Switching Clock
Output Ripple Voltage	< 30 mV peak-to-peak frequency ripple
Module Frame Footprint	Approx. 43 mm × 21 mm × 14 mm

-20%

FT232RL FTDI USB to TTL Serial Converter Adapter Module

Characteristic	Specification Parameters
Core Protocol Chipset	FTDI FT232RL (Future Technology Devices International)
Physical Input Interface	Mini-USB Female Socket Port Link
Supported Data Rates	300 bps up to 3 Mbps maximum transmission speed
Operating Logic Voltage	Dual 3.3V or 5.0V DC Options (Jumper Selectable)
VCC Output Current Limits	5V mode: Up to ~500mA / 3.3V mode: Up to ~50mA
Host Operating Systems	Windows 10/11, macOS, Linux distributions, and Android
Pin Header Spacing	Standard 2.54 mm (0.1 inch) Pitch