Name: CN6009 / XL6009 DC-DC Adjustable Step-Up Boost Converter Module
SKU: VE-133
Availability: InStock

CN6009 / XL6009 DC-DC Adjustable Step-Up Boost Converter Module

Technical Specifications

Characteristic	Specification Parameters
Converter Circuit Topology	Non-Isolated Step-Up Boost Regulator
Input Supply Voltage (VIN)	3.0V to 32.0V DC (Optimal performance configuration begins at 5.0V)
Adjustable Output (VOUT)	5.0V to 35.0V DC (Output voltage must remain higher than input)
Switch Output Current Limit	4.0A Maximum peak load tracking current (Continuous output rated at 2.0A–3.0A without external cooling)
Fixed Internal Clock	400 kHz Switching Frequency
Maximum Efficiency Profile	Up to 94% Conversion Performance
Output Ripple Voltage	~50 mV to 100 mV peak-to-peak frequency ripple
Chassis Main Dimensions	Approx. 43 mm × 21 mm × 14 mm

SKU: VE-133 Category: Converters

The CN6009 / XL6009 DC-DC Adjustable Step-Up Boost Converter Module is a high-performance power regulation board designed to increase a lower input DC voltage up to a stable, higher output DC voltage. Powered by the second-generation high-frequency XL6009E1 switching regulator chip, it operates as a non-isolated boost circuit running at a fixed frequency of 400 kHz. It serves as a direct, highly efficient upgrade to legacy modules like the LM2577, making it the preferred solution for powering 12V or 24V electronics from basic 3.7V Lithium-ion batteries or 5V USB rails.

✨ Key Features

High-Frequency Switching Core: Operates at 400 kHz, allowing the use of small filtering capacitors while producing minimal output voltage ripple compared to legacy 50 kHz regulators.
Onboard Trimpot Customisation: Outfitted with a precision multi-turn trimmer potentiometer to dynamically dial in your targeted output voltage scale.
Exceptional Power Delivery: Features a built-in 4A high-efficiency MOSFET switch that delivers a significant conversion efficiency rating up to 94%.

-25%

Click to enlarge

Back to products

Original price was: ₹120.00.Current price is: ₹90.00.

Characteristic	Specification Parameters
Converter Circuit Topology	Non-Isolated Step-Up Boost Regulator
Input Supply Voltage (VIN)	3.0V to 32.0V DC (Optimal performance configuration begins at 5.0V)
Adjustable Output (VOUT)	5.0V to 35.0V DC (Output voltage must remain higher than input)
Switch Output Current Limit	4.0A Maximum peak load tracking current (Continuous output rated at 2.0A–3.0A without external cooling)
Fixed Internal Clock	400 kHz Switching Frequency
Maximum Efficiency Profile	Up to 94% Conversion Performance
Output Ripple Voltage	~50 mV to 100 mV peak-to-peak frequency ripple
Chassis Main Dimensions	Approx. 43 mm × 21 mm × 14 mm

Compare

Add to wishlist

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “CN6009 / XL6009 DC-DC Adjustable Step-Up Boost Converter Module”

Shipping & Delivery

Related products

PL2303 USB to TTL Serial Converter Cable

Converters

Characteristic	Specification Parameters
Embedded Controller IC	Prolific Technology PL2303HX / PL2303TA / PL2303GS
Host Computer Port	Standard USB Type-A Male Interface
Cable Length Profile	Approximately 1.0 Meter (3.3 Feet)
Logic Signal Threshold	3.3V TTL Level Logic (Standard model assignment)
Integrated Power Output	Fixed 5.0V DC output path pulled from host USB port
Supported Baud Rates	300 bps up to 1 Mbps or 6 Mbps (Depending on PL2303 generation)
Wire Terminal Interface	4 Pin Individual Female JST/Dupont Receptacles

Add to cart

Quick view

PL2303 USB to TTL Serial Converter Module

Characteristic	Specification Parameters
Core Controller IC	Prolific Technology PL2303 / PL2303HX / PL2303TA
Physical Input Interface	USB Type-A Male Plug
Supported Transmission Rates	300 bps up to 1 Mbps standard matching speed limits
Logic Threshold Level	3.3V / 5.0V Dual TTL compatible signals
Power Output Delivery	3.3V DC and 5.0V DC output paths
Data Transmission Buffers	128-byte inbound buffer / 256-byte outbound buffer
Status Monitoring	2 Onboard LEDs for real-time TX and RX traffic logging

XL4016 DC 10A 300W Step Down Buck Converter

Characteristic	Specification Parameters
Converter Circuit Core	XL4016E1 Non-Isolated Buck Switching Regulator
Input Supply Voltage (VIN)	7.0V to 40.0V DC (Input must be higher than target output)
Adjustable Output (VOUT)	1.2V to 35.0V DC (Continuously variable via CV trimmer)
Output Current Capacity	0.2A to 8A Continuous (Hits up to 10A Maximum with active fan cooling)
Maximum Output Power	Up to 300W Peak Performance Capacity
Fixed Switching Frequency	180 kHz / 300 kHz (Depending on exact board revision)
Output Voltage Ripple	~50 mV peak-to-peak frequency ripple
Chassis Dimensions	Approx. 65 mm × 47 mm × 24 mm

-20%

FT232RL FTDI USB to TTL Serial Converter Adapter Module

Characteristic	Specification Parameters
Core Protocol Chipset	FTDI FT232RL (Future Technology Devices International)
Physical Input Interface	Mini-USB Female Socket Port Link
Supported Data Rates	300 bps up to 3 Mbps maximum transmission speed
Operating Logic Voltage	Dual 3.3V or 5.0V DC Options (Jumper Selectable)
VCC Output Current Limits	5V mode: Up to ~500mA / 3.3V mode: Up to ~50mA
Host Operating Systems	Windows 10/11, macOS, Linux distributions, and Android
Pin Header Spacing	Standard 2.54 mm (0.1 inch) Pitch

CP2102 USB to TTL Serial Converter Module 6-pin (Black PCB Edition)

Characteristic	Specification Parameters
Core Protocol Chipset	Silicon Labs CP2102 USB-to-UART Bridge Controller
PCB Soldermask Color	Matte Black / Glossy Black
PC Input Connector	Standard USB Type-A Male Interface
Data Rate Range	300 bps up to 1.0 Mbps or 1.5 Mbps stable operations
Internal Data Buffers	512-Byte Receive Buffer / 640-Byte Transmit Buffer
Logic Signal Voltage	3.3V TTL Level Logic (Inputs are safely 5V tolerant)
Module Length & Width	Approx. 42 mm × 15 mm

-17%

MP1584 DC-DC Adjustable Step-Down Buck Converter Module

Characteristic	Specification Parameters
Converter Circuit Topology	Non-Isolated Step-Down (Buck) Switching Regulator
Input Supply Voltage (VIN)	4.5V to 28.0V DC (Input must remain at least 1.5V higher than output)
Adjustable Output (VOUT)	0.8V to 20.0V DC (Continuously variable scale)
Continuous Output Current	Up to 1.5A to 2.0A stable (Up to 3.0A maximum peak with short pulse durations)
Fixed Switching Frequency	Up to 1.5 MHz High-Speed Internal Clock
Maximum Efficiency Profile	Up to 92% Power Conversion Performance
Built-in System Protections	Thermal shutdown safety and cycle-by-cycle over-current limiting
Chassis Main Dimensions	Approx. 22 mm × 17 mm × 4 mm (Ultra-slim design)

CP2102 USB to TTL Serial Converter Module

Characteristic	Specification Parameters
Core Controller IC	Silicon Labs CP2102 USB-to-UART Bridge
Physical Input Interface	Micro-USB, Mini-USB, or Type-C Female Port (Variant dependent)
Supported Transfer Rates	300 bps up to 1 Mbps full hardware speed matching
Signal Logic Threshold	3.3V TTL Logic (Inputs are safely 5V tolerant)
Onboard Voltage Outputs	3.3V DC (up to 100mA max) and 5.0V DC (up to 500mA with self-resetting fuse)
Integrated Hardware Buffer	512-byte receive buffer and 512-byte transmit buffer
Module Outer Dimensions	Approx. 26 mm × 15 mm × 11 mm (Ultra-compact form factor)

-23%

Multi-Output DC-DC 12V to 3.3V / 5V / 12V Step-Down Power Module

Characteristic	Specification Parameters
Converter Circuit Form	Non-Isolated Multi-Rail Step-Down (Buck) Power Distribution Hub
Input Supply Voltage (VIN)	6.0V to 12.0V DC (12V recommended to ensure full pass-through tracking)
Available Output Rails	3.3V DC, 5.0V DC, and 12.0V DC Fixed Channels
Output Current Limit	~800 mA per individual low-voltage rail channel
Chassis Interface Format	Standard Red or Black Double-Sided PCB Layout
Onboard Voltage Regulators	AMS1117-3.3 (3.3V rail) and AMS1117-5.0 (5.0V rail) Linear Drops
Module Frame Footprint	Approx. 31 mm × 26 mm × 12 mm (Compact workspace profile)