Name: CP2102 USB to TTL Serial Converter Module 6-pin (Black PCB Edition)
SKU: VE-127
Availability: InStock

CP2102 USB to TTL Serial Converter Module 6-pin (Black PCB Edition)

Technical Specifications

Characteristic	Specification Parameters
Core Protocol Chipset	Silicon Labs CP2102 USB-to-UART Bridge Controller
PCB Soldermask Color	Matte Black / Glossy Black
PC Input Connector	Standard USB Type-A Male Interface
Data Rate Range	300 bps up to 1.0 Mbps or 1.5 Mbps stable operations
Internal Data Buffers	512-Byte Receive Buffer / 640-Byte Transmit Buffer
Logic Signal Voltage	3.3V TTL Level Logic (Inputs are safely 5V tolerant)
Module Length & Width	Approx. 42 mm × 15 mm

SKU: VE-127 Category: Converters

The CP2102 USB to TTL Serial Converter Module (Black PCB Edition) is a premium version of the standard Silicon Labs CP2102 hardware bridge. While functionally identical to the standard red variant, the black circuit board version is highly popular among developers due to an optimized hardware layout. It exposes the critical DTR (Data Terminal Ready) pin directly on the main 6-pin header instead of a legacy RST pin. This eliminates the need for soldering extra side pins and allows it to plug directly into boards like the Arduino Pro Mini or ESP32 for automated, hands-free firmware flashing.

✨ Key Features

Native Auto-Reset Pin Alignment: Features the DTR pin directly inline with the main 6-pin layout block, enabling instant auto-reset execution without user button coordination.
Silicon Labs Signal Integrity: Uses authentic CP2102 silicon to maintain continuous, high-speed asynchronous data streams up to 1 Mbps without frame corruption.
Dual Simultaneous Power Taps: Provides dedicated, parallel 3.3V and 5V power pads on the chassis to directly energize distinct low-power target sensors.
Computer Port Over-Current Shielding: Includes a surface-mounted self-recovery fuse that automatically trips during short-circuits, safeguarding host PC USB hardware.

-25%

Click to enlarge

Back to products

Original price was: ₹200.00.Current price is: ₹150.00.

Characteristic	Specification Parameters
Core Protocol Chipset	Silicon Labs CP2102 USB-to-UART Bridge Controller
PCB Soldermask Color	Matte Black / Glossy Black
PC Input Connector	Standard USB Type-A Male Interface
Data Rate Range	300 bps up to 1.0 Mbps or 1.5 Mbps stable operations
Internal Data Buffers	512-Byte Receive Buffer / 640-Byte Transmit Buffer
Logic Signal Voltage	3.3V TTL Level Logic (Inputs are safely 5V tolerant)
Module Length & Width	Approx. 42 mm × 15 mm

Compare

Add to wishlist

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “CP2102 USB to TTL Serial Converter Module 6-pin (Black PCB Edition)”

Shipping & Delivery

Related products

XL4015 5A DC-DC Adjustable Step-Down Buck Converter Module

Converters

Characteristic	Specification Parameters
Converter Circuit Topology	Non-Isolated Step-Down (Buck) Switching Regulator
Input Supply Voltage (VIN)	8.0V to 36.0V DC (Input must remain at least 1.5V higher than output)
Adjustable Output (VOUT)	1.25V to 32.0V DC (Continuously variable scale)
Continuous Output Current	Up to 3.5A stable (Up to 5.0A maximum peak with an attached heatsink)
Fixed Switching Frequency	180 kHz Internal Oscillator Clock
Maximum Efficiency Profile	Up to 96% Conversion Performance
Built-in System Protections	Short-circuit current limiting protection and over-temperature thermal shutdown
Chassis Main Dimensions	Approx. 54 mm × 24 mm × 15 mm

Add to cart

Quick view

-17%

MP1584 DC-DC Adjustable Step-Down Buck Converter Module

Characteristic	Specification Parameters
Converter Circuit Topology	Non-Isolated Step-Down (Buck) Switching Regulator
Input Supply Voltage (VIN)	4.5V to 28.0V DC (Input must remain at least 1.5V higher than output)
Adjustable Output (VOUT)	0.8V to 20.0V DC (Continuously variable scale)
Continuous Output Current	Up to 1.5A to 2.0A stable (Up to 3.0A maximum peak with short pulse durations)
Fixed Switching Frequency	Up to 1.5 MHz High-Speed Internal Clock
Maximum Efficiency Profile	Up to 92% Power Conversion Performance
Built-in System Protections	Thermal shutdown safety and cycle-by-cycle over-current limiting
Chassis Main Dimensions	Approx. 22 mm × 17 mm × 4 mm (Ultra-slim design)

CN6009 / XL6009 DC-DC Adjustable Step-Up Boost Converter Module

Characteristic	Specification Parameters
Converter Circuit Topology	Non-Isolated Step-Up Boost Regulator
Input Supply Voltage (VIN)	3.0V to 32.0V DC (Optimal performance configuration begins at 5.0V)
Adjustable Output (VOUT)	5.0V to 35.0V DC (Output voltage must remain higher than input)
Switch Output Current Limit	4.0A Maximum peak load tracking current (Continuous output rated at 2.0A–3.0A without external cooling)
Fixed Internal Clock	400 kHz Switching Frequency
Maximum Efficiency Profile	Up to 94% Conversion Performance
Output Ripple Voltage	~50 mV to 100 mV peak-to-peak frequency ripple
Chassis Main Dimensions	Approx. 43 mm × 21 mm × 14 mm

-23%

Multi-Output DC-DC 12V to 3.3V / 5V / 12V Step-Down Power Module

Characteristic	Specification Parameters
Converter Circuit Form	Non-Isolated Multi-Rail Step-Down (Buck) Power Distribution Hub
Input Supply Voltage (VIN)	6.0V to 12.0V DC (12V recommended to ensure full pass-through tracking)
Available Output Rails	3.3V DC, 5.0V DC, and 12.0V DC Fixed Channels
Output Current Limit	~800 mA per individual low-voltage rail channel
Chassis Interface Format	Standard Red or Black Double-Sided PCB Layout
Onboard Voltage Regulators	AMS1117-3.3 (3.3V rail) and AMS1117-5.0 (5.0V rail) Linear Drops
Module Frame Footprint	Approx. 31 mm × 26 mm × 12 mm (Compact workspace profile)

PL2303 USB to TTL Serial Converter Module

Characteristic	Specification Parameters
Core Controller IC	Prolific Technology PL2303 / PL2303HX / PL2303TA
Physical Input Interface	USB Type-A Male Plug
Supported Transmission Rates	300 bps up to 1 Mbps standard matching speed limits
Logic Threshold Level	3.3V / 5.0V Dual TTL compatible signals
Power Output Delivery	3.3V DC and 5.0V DC output paths
Data Transmission Buffers	128-byte inbound buffer / 256-byte outbound buffer
Status Monitoring	2 Onboard LEDs for real-time TX and RX traffic logging

CH340 USB to TTL Serial Converter Module

Characteristic	Specification Parameters
Core Controller IC	Jiangsu Qinheng Co. (WCH) CH340G / CH340C / CH340E
Physical Input Interface	USB Type-A Male, Micro-USB, or USB Type-C Female Port
Supported Baud Rates	50 bps up to 2 Mbps full hardware speed matching
Signal Logic Threshold	3.3V and 5.0V TTL levels (Jumper or Switch configurable)
Onboard Power Outputs	Direct 5V (USB Bus supply) and an integrated 3.3V power rail line
Hardware Handshaking	Full modem interface support pins (DTR, RTS) broken out on select boards
Module Outer Dimensions	Approx. 38 mm × 16 mm × 11 mm (Standard stick form factor)

PL2303 USB to TTL Serial Converter Cable

Characteristic	Specification Parameters
Embedded Controller IC	Prolific Technology PL2303HX / PL2303TA / PL2303GS
Host Computer Port	Standard USB Type-A Male Interface
Cable Length Profile	Approximately 1.0 Meter (3.3 Feet)
Logic Signal Threshold	3.3V TTL Level Logic (Standard model assignment)
Integrated Power Output	Fixed 5.0V DC output path pulled from host USB port
Supported Baud Rates	300 bps up to 1 Mbps or 6 Mbps (Depending on PL2303 generation)
Wire Terminal Interface	4 Pin Individual Female JST/Dupont Receptacles

-38%

LM2596 DC-DC Buck Converter Step-Down Module

Characteristic	Specification Parameters
Regulator Topology	Monolithic Step-Down (Buck) Switching Regulator
Input Supply Voltage (VIN)	4.0V to 40.0V DC (Input must be at least 1.5V higher than output)
Adjustable Output (VOUT)	1.23V to 35.0V DC (Continuously variable)
Continuous Output Current	Up to 2.0A stable (Up to 3.0A maximum peak with an attached heatsink)
Fixed Internal Frequency	150 kHz Switching Clock
Output Ripple Voltage	< 30 mV peak-to-peak frequency ripple
Module Frame Footprint	Approx. 43 mm × 21 mm × 14 mm