Name: FT232RL FTDI USB to TTL Serial Converter Adapter Module
SKU: VE-123
Availability: InStock

FT232RL FTDI USB to TTL Serial Converter Adapter Module

Technical Specifications

Characteristic	Specification Parameters
Core Protocol Chipset	FTDI FT232RL (Future Technology Devices International)
Physical Input Interface	Mini-USB Female Socket Port Link
Supported Data Rates	300 bps up to 3 Mbps maximum transmission speed
Operating Logic Voltage	Dual 3.3V or 5.0V DC Options (Jumper Selectable)
VCC Output Current Limits	5V mode: Up to ~500mA / 3.3V mode: Up to ~50mA
Host Operating Systems	Windows 10/11, macOS, Linux distributions, and Android
Pin Header Spacing	Standard 2.54 mm (0.1 inch) Pitch

SKU: VE-123 Category: Converters

The FT232RL FTDI USB to TTL Serial Converter Adapter Module is a high-performance USB-to-UART bridging card engineered to establish asynchronous data pipelines between personal computers and microcontrollers. Populated with an authentic FT232RL chipset, this breakout device converts USB signals into standard TTL-level serial data strings. It is widely adopted by engineers and developers across India for debugging embedded firmware, configuring wireless radios, and flashing development boards that lack an integrated USB interface, such as the Arduino Pro Mini or ESP32-CAM.

✨ Key Features

Genuine FTDI Silicon Integration: Built with the original FT232RL processor to guarantee stable communication, broad operating system driver support, and zero connection drops.
Hardware-Selectable Logic Rails: Outfitted with a physical 3-pin header shunt jumper to instantly switch signal logic thresholds between 3.3V and 5V DC.
Onboard Power Isolation Fuse: Equipped with a 500mA self-resettable polyfuse on the main VBUS line to shield your laptop or computer’s USB port from downstream short-circuits.
Real-Time LED Status Monitoring: Features three integrated surface-mount indicator LEDs (Power, RXD, and TXD) to provide immediate visual confirmation of active data transmissions

-20%

Click to enlarge

Back to products

Original price was: ₹150.00.Current price is: ₹120.00.

Characteristic	Specification Parameters
Core Protocol Chipset	FTDI FT232RL (Future Technology Devices International)
Physical Input Interface	Mini-USB Female Socket Port Link
Supported Data Rates	300 bps up to 3 Mbps maximum transmission speed
Operating Logic Voltage	Dual 3.3V or 5.0V DC Options (Jumper Selectable)
VCC Output Current Limits	5V mode: Up to ~500mA / 3.3V mode: Up to ~50mA
Host Operating Systems	Windows 10/11, macOS, Linux distributions, and Android
Pin Header Spacing	Standard 2.54 mm (0.1 inch) Pitch

Compare

Add to wishlist

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “FT232RL FTDI USB to TTL Serial Converter Adapter Module”

Shipping & Delivery

Related products

-38%

LM2596 DC-DC Buck Converter Step-Down Module

Converters

Characteristic	Specification Parameters
Regulator Topology	Monolithic Step-Down (Buck) Switching Regulator
Input Supply Voltage (VIN)	4.0V to 40.0V DC (Input must be at least 1.5V higher than output)
Adjustable Output (VOUT)	1.23V to 35.0V DC (Continuously variable)
Continuous Output Current	Up to 2.0A stable (Up to 3.0A maximum peak with an attached heatsink)
Fixed Internal Frequency	150 kHz Switching Clock
Output Ripple Voltage	< 30 mV peak-to-peak frequency ripple
Module Frame Footprint	Approx. 43 mm × 21 mm × 14 mm

Add to cart

Quick view

-17%

MP1584 DC-DC Adjustable Step-Down Buck Converter Module

Characteristic	Specification Parameters
Converter Circuit Topology	Non-Isolated Step-Down (Buck) Switching Regulator
Input Supply Voltage (VIN)	4.5V to 28.0V DC (Input must remain at least 1.5V higher than output)
Adjustable Output (VOUT)	0.8V to 20.0V DC (Continuously variable scale)
Continuous Output Current	Up to 1.5A to 2.0A stable (Up to 3.0A maximum peak with short pulse durations)
Fixed Switching Frequency	Up to 1.5 MHz High-Speed Internal Clock
Maximum Efficiency Profile	Up to 92% Power Conversion Performance
Built-in System Protections	Thermal shutdown safety and cycle-by-cycle over-current limiting
Chassis Main Dimensions	Approx. 22 mm × 17 mm × 4 mm (Ultra-slim design)

-25%

PL2303 USB to TTL Serial Converter Cable

Characteristic	Specification Parameters
Embedded Controller IC	Prolific Technology PL2303HX / PL2303TA / PL2303GS
Host Computer Port	Standard USB Type-A Male Interface
Cable Length Profile	Approximately 1.0 Meter (3.3 Feet)
Logic Signal Threshold	3.3V TTL Level Logic (Standard model assignment)
Integrated Power Output	Fixed 5.0V DC output path pulled from host USB port
Supported Baud Rates	300 bps up to 1 Mbps or 6 Mbps (Depending on PL2303 generation)
Wire Terminal Interface	4 Pin Individual Female JST/Dupont Receptacles

CN6009 / XL6009 DC-DC Adjustable Step-Up Boost Converter Module

Characteristic	Specification Parameters
Converter Circuit Topology	Non-Isolated Step-Up Boost Regulator
Input Supply Voltage (VIN)	3.0V to 32.0V DC (Optimal performance configuration begins at 5.0V)
Adjustable Output (VOUT)	5.0V to 35.0V DC (Output voltage must remain higher than input)
Switch Output Current Limit	4.0A Maximum peak load tracking current (Continuous output rated at 2.0A–3.0A without external cooling)
Fixed Internal Clock	400 kHz Switching Frequency
Maximum Efficiency Profile	Up to 94% Conversion Performance
Output Ripple Voltage	~50 mV to 100 mV peak-to-peak frequency ripple
Chassis Main Dimensions	Approx. 43 mm × 21 mm × 14 mm

CH340 USB to TTL Serial Converter Module

Characteristic	Specification Parameters
Core Controller IC	Jiangsu Qinheng Co. (WCH) CH340G / CH340C / CH340E
Physical Input Interface	USB Type-A Male, Micro-USB, or USB Type-C Female Port
Supported Baud Rates	50 bps up to 2 Mbps full hardware speed matching
Signal Logic Threshold	3.3V and 5.0V TTL levels (Jumper or Switch configurable)
Onboard Power Outputs	Direct 5V (USB Bus supply) and an integrated 3.3V power rail line
Hardware Handshaking	Full modem interface support pins (DTR, RTS) broken out on select boards
Module Outer Dimensions	Approx. 38 mm × 16 mm × 11 mm (Standard stick form factor)

PL2303 USB to TTL Serial Converter Module

Characteristic	Specification Parameters
Core Controller IC	Prolific Technology PL2303 / PL2303HX / PL2303TA
Physical Input Interface	USB Type-A Male Plug
Supported Transmission Rates	300 bps up to 1 Mbps standard matching speed limits
Logic Threshold Level	3.3V / 5.0V Dual TTL compatible signals
Power Output Delivery	3.3V DC and 5.0V DC output paths
Data Transmission Buffers	128-byte inbound buffer / 256-byte outbound buffer
Status Monitoring	2 Onboard LEDs for real-time TX and RX traffic logging

CP2102 USB to TTL Serial Converter Module

Characteristic	Specification Parameters
Core Controller IC	Silicon Labs CP2102 USB-to-UART Bridge
Physical Input Interface	Micro-USB, Mini-USB, or Type-C Female Port (Variant dependent)
Supported Transfer Rates	300 bps up to 1 Mbps full hardware speed matching
Signal Logic Threshold	3.3V TTL Logic (Inputs are safely 5V tolerant)
Onboard Voltage Outputs	3.3V DC (up to 100mA max) and 5.0V DC (up to 500mA with self-resetting fuse)
Integrated Hardware Buffer	512-byte receive buffer and 512-byte transmit buffer
Module Outer Dimensions	Approx. 26 mm × 15 mm × 11 mm (Ultra-compact form factor)

XL4015 5A DC-DC Adjustable Step-Down Buck Converter Module

Characteristic	Specification Parameters
Converter Circuit Topology	Non-Isolated Step-Down (Buck) Switching Regulator
Input Supply Voltage (VIN)	8.0V to 36.0V DC (Input must remain at least 1.5V higher than output)
Adjustable Output (VOUT)	1.25V to 32.0V DC (Continuously variable scale)
Continuous Output Current	Up to 3.5A stable (Up to 5.0A maximum peak with an attached heatsink)
Fixed Switching Frequency	180 kHz Internal Oscillator Clock
Maximum Efficiency Profile	Up to 96% Conversion Performance
Built-in System Protections	Short-circuit current limiting protection and over-temperature thermal shutdown
Chassis Main Dimensions	Approx. 54 mm × 24 mm × 15 mm