Name: ESP8266 ESP-12E Serial Wi-Fi Transceiver Module
SKU: VE-119
Availability: InStock

ESP8266 ESP-12E Serial Wi-Fi Transceiver Module

Technical Specifications

Characteristic	Specification Parameters
Core Processor	Tensilica L106 32-bit RISC Microprocessor Core
Operating Frequency	80 MHz (Configurable / overclockable up to 160 MHz)
Storage Memory Space	4 MB (32 Mbits) SPI Flash Memory storage buffer
Operating Voltage (VCC)	3.0V to 3.6V DC (Requires stable 3.3V power supply rail)
Logic Signal Threshold	3.3V TTL (Pins are not 5V logic safe)
Wireless standard	2.4 GHz Wi-Fi IEEE 802.11 b/g/n (STA / AP / STA+AP modes)
Peripheral Interfaces	10-bit ADC, SPI, H-SPI, UART, I2C, I2S, IRDA, PWM

SKU: VE-119 Category: ESP

The ESP8266 ESP-12E Serial Wi-Fi Transceiver Module is an ultra-compact, surface-mount standalone Wi-Fi microchip tailored for Internet of Things (IoT) hardware deployments. Representing the core silicon tracking module found inside standard NodeMCU boards, it wraps an embedded 32-bit application core and a full TCP/IP networking stack into a shielded metal enclosure. It features an optimized peripheral design that exposes a high volume of hardware pins, allowing it to function as a compact standalone edge controller or a powerful Wi-Fi coprocessor for larger host systems.

✨ Key Features

Expanded General-Purpose I/O: Exposes 6 additional GPIO pins compared to standard ESP-12 variants, bringing out dedicated SPI lines for flexible peripheral wiring.
Onboard Shielded PCB Antenna: Features an integrated impedance-matched trace antenna housed beneath a metal shield box to maximize signal noise rejection.
Dual Operation Adaptability: Functions seamlessly as an autonomous, standalone microcontroller unit or acts as a passive Wi-Fi adapter parsing AT commands.
Deep Sleep Power Optimization: Outfitted with advanced power-gating states that drop power consumption below 10µA during standby intervals to save battery life.

-18%

Click to enlarge

Back to products

Original price was: ₹220.00.Current price is: ₹180.00.

Characteristic	Specification Parameters
Core Processor	Tensilica L106 32-bit RISC Microprocessor Core
Operating Frequency	80 MHz (Configurable / overclockable up to 160 MHz)
Storage Memory Space	4 MB (32 Mbits) SPI Flash Memory storage buffer
Operating Voltage (VCC)	3.0V to 3.6V DC (Requires stable 3.3V power supply rail)
Logic Signal Threshold	3.3V TTL (Pins are not 5V logic safe)
Wireless standard	2.4 GHz Wi-Fi IEEE 802.11 b/g/n (STA / AP / STA+AP modes)
Peripheral Interfaces	10-bit ADC, SPI, H-SPI, UART, I2C, I2S, IRDA, PWM

Compare

Add to wishlist

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ESP8266 ESP-12E Serial Wi-Fi Transceiver Module”

Shipping & Delivery

Related products

-20%

ESP32-CAM-MB Micro USB Programmer Base Board

Camera Module, ESP

Characteristic	Specification Parameters
Compatible Companion Hardware	AI-Thinker Form-Factor ESP32-CAM W/ OV2640 / OV3660
USB Communication Port	Micro-USB or USB Type-C Interfacing (Variant dependent)
Onboard USB-to-Serial Driver	Silicon Labs CH340 Series (CH340G / CH340C)
Input Supply Voltage (VBUS)	5.0V DC via USB Bus line
Onboard Voltage Regulation	Drops 5V down to 3.3V Output (Feeds ESP32-CAM power tracks)
Hardware Buttons Profile	1× Reset Button, 1× Boot Button (Varies by hardware revision)
Physical Dimensions (approx.)	40 mm × 27 mm × 16 mm

Add to cart

Quick view

-22%

NodeMCU ESP8266 CP2102 Wi-Fi Development Board

ESP

Characteristic	Specification Parameters
Core Processor	Tensilica 32-bit RISC CPU Xtensa LX106 (Clocked at 80 MHz to 160 MHz)
Storage Capacity	4 MB (32 Mbit) SPI Flash Memory / 64 KB SRAM
USB-UART Bridge	Silicon Labs CP2102 Chip
Operating Voltage	3.3V DC internal logic (Onboard LDO regulates 5V USB input)
Digital I/O Layout	16 General Purpose Input/Output Pins (including PWM and 1-ch ADC)
Wi-Fi Networking	IEEE 802.11 b/g/n (Supports Station, Soft-AP, and Dual modes)
Dimensions (approx.)	49 mm × 24.5 mm × 13 mm

-17%

ESP32-C3 Mini Development Board

Characteristic	Specification Parameters
Microprocessor Core	Espressif ESP32-C3 32-bit RISC-V Single-Core (Up to 160 MHz)
On-Chip Memory Array	400 KB SRAM / 384 KB ROM / 4 MB Onboard Flash
Wireless Transceivers	2.4 GHz Wi-Fi 4 (802.11 b/g/n) + Bluetooth 5.0 & BLE
Operating Voltage	3.3V DC Logic level (Internal regulator converts input power)
External Power Input	5V via USB-C or 3.3V to 6.0V via VIN pin
Peripheral Interfacing	11 Accessible GPIOs, 6-ch PWM, 2× 12-bit ADCs, SPI, I2C, UART
Module Dimensions	Approx. 22.5 mm × 18 mm (Super-mini form factor)

ESP32-S3 DevKit Development Board

Characteristic	Specification Parameters
Microprocessor Core	Xtensa Dual-Core 32-bit LX7 Processor (Up to 240 MHz)
On-Chip Memory Array	512 KB Internal SRAM / 384 KB ROM
External Module Memory	8 MB Flash + 8 MB PSRAM (Standard N8R8 variant configuration)
Wireless Transceivers	2.4 GHz Wi-Fi 4 (802.11 b/g/n) + Bluetooth 5.0 LE & Mesh
Logic Working Voltage	3.3V DC (Onboard dynamic regulators step down external input)
Power Input Interface	Dual USB Type-C ports (1× USB-to-UART, 1× Native USB OTG)
Module Dimensions	Approx. 57 mm × 28 mm × 10 mm

NodeMCU ESP8266 CH340 Wi-Fi Development Board

Characteristic	Specification Parameters
Core Processor	Tensilica 32-bit RISC CPU Xtensa LX106 (80 MHz to 160 MHz)
Storage Capacity	4 MB (32 Mbit) SPI Flash Memory / 64 KB SRAM
USB-UART Bridge	CH340 Serial Converter Chip
Operating Voltage	3.3V DC Internal Logic (Onboard regulator steps down 5V USB input)
Digital I/O Layout	16 General Purpose Input/Output Pins (supports PWM and 1-ch ADC)
Wi-Fi Networking	IEEE 802.11 b/g/n (Supports Station, Soft-AP, and Dual modes)
Dimensions (approx.)	58 mm × 31 mm × 13 mm (Wider V3/Lolin form factor)

-19%

ESP32-CAM Wi-Fi + Bluetooth Camera Development Module

Characteristic	Specification Parameters
Core Processor	Tensilica 32-bit RISC CPU Xtensa Dual-Core LX6 (Up to 240 MHz)
Memory Buffer	520 KB Internal SRAM + 4 MB External PSRAM (Required for image buffering)
Wireless Transceivers	2.4 GHz Wi-Fi (802.11b/g/n) + Bluetooth v4.2 BR/EDR & BLE standard
Supported Image Sensors	OV2640 (Standard choice) and OV7670 camera modules
Maximum Resolution	1600 × 1200 Pixels (UXGA resolution framework)
Storage Socket Type	Onboard MicroSD Card Slot (Supports SPI communication paths)
Default Image Output	JPEG, BMP, Grayscale formats

-13%

ESP32-S3 DevKitC-1 WiFi + Bluetooth Development Board

Characteristic	Specification Parameters
Microprocessor Core	Xtensa Dual-Core 32-bit LX7 Processor (Up to 240 MHz)
On-Chip Memory Array	512 KB Internal SRAM / 384 KB ROM
External Module Memory	8 MB Flash + 8 MB PSRAM (Standard N8R8 variant configuration)
Wireless Transceivers	2.4 GHz Wi-Fi 4 (802.11 b/g/n) + Bluetooth 5.0 LE & Mesh
Logic Working Voltage	3.3V DC (Onboard dynamic regulators step down external input)
Power Input Interface	Dual USB Type-C ports (1× USB-to-UART, 1× Native USB OTG)
Module Dimensions	Approx. 57 mm × 28 mm × 10 mm

ESP32 NodeMCU Wi-Fi + Bluetooth Development Board 30 pin

Characteristic	Specification Parameters
Microprocessor Core	Xtensa Dual-Core 32-bit LX6 Microprocessor (Up to 240 MHz)
Memory Capacity	520 KB SRAM / 4 MB External Flash Storage Memory
Wireless Protocols	Wi-Fi 802.11 b/g/n (Up to 150 Mbps) + Bluetooth v4.2 & BLE
Logic Working Voltage	3.3V DC (Onboard 1117 regulator accepts 5V USB input)
GPIO Interface Array	30-Pin layout with multi-functional breakout mappings
USB-UART Interface	Onboard Silabs CP2102 USB-to-Serial converter chip
Module Dimensions	Approx. 51 mm × 28 mm × 13 mm (Breadboard friendly)