Name: Multi-Output DC-DC 12V to 3.3V / 5V / 12V Step-Down Power Module
SKU: VE-137
Availability: InStock

Multi-Output DC-DC 12V to 3.3V / 5V / 12V Step-Down Power Module

Technical Specifications

Characteristic	Specification Parameters
Converter Circuit Form	Non-Isolated Multi-Rail Step-Down (Buck) Power Distribution Hub
Input Supply Voltage (VIN)	6.0V to 12.0V DC (12V recommended to ensure full pass-through tracking)
Available Output Rails	3.3V DC, 5.0V DC, and 12.0V DC Fixed Channels
Output Current Limit	~800 mA per individual low-voltage rail channel
Chassis Interface Format	Standard Red or Black Double-Sided PCB Layout
Onboard Voltage Regulators	AMS1117-3.3 (3.3V rail) and AMS1117-5.0 (5.0V rail) Linear Drops
Module Frame Footprint	Approx. 31 mm × 26 mm × 12 mm (Compact workspace profile)

SKU: VE-137 Category: Converters

The Multi-Output DC-DC 12V to 3.3V / 5V / 12V Power Module is a multi-rail, fixed-distribution buck converter board designed to supply multiple independent voltage rails from a single power source. Instead of adjusting trim potentiometers or wiring separate buck regulators, this all-in-one distribution card houses fixed linear or switching drops on a single PCB. It acts as an efficient power hub, making it a foundational tool for breadboard prototyping, complex sensor networks, smart home nodes, and multi-component setups that require different voltages simultaneously.

✨ Key Features

Simultaneous Multi-Rail Output: Delivers steady 3.3V, 5V, and 12V power paths at the same time from one central input plug.
Direct 12V Voltage Pass-Through: Features a native bypass lane that routes your input power directly to a 12V terminal, maintaining a dedicated high-voltage rail for motors or fans.
Standard 2.54mm Pin Outbreak: Outfitted with neat rows of pre-soldered male pin headers, enabling easy connection with standard Dupont jumper cables.
Integrated Hardware Power Indicator: Populated with an onboard status LED that glows when the main input line is active, simplifying system troubleshooting.

-23%

Click to enlarge

Back to products

Original price was: ₹65.00.Current price is: ₹50.00.

Characteristic	Specification Parameters
Converter Circuit Form	Non-Isolated Multi-Rail Step-Down (Buck) Power Distribution Hub
Input Supply Voltage (VIN)	6.0V to 12.0V DC (12V recommended to ensure full pass-through tracking)
Available Output Rails	3.3V DC, 5.0V DC, and 12.0V DC Fixed Channels
Output Current Limit	~800 mA per individual low-voltage rail channel
Chassis Interface Format	Standard Red or Black Double-Sided PCB Layout
Onboard Voltage Regulators	AMS1117-3.3 (3.3V rail) and AMS1117-5.0 (5.0V rail) Linear Drops
Module Frame Footprint	Approx. 31 mm × 26 mm × 12 mm (Compact workspace profile)

Compare

Add to wishlist

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Multi-Output DC-DC 12V to 3.3V / 5V / 12V Step-Down Power Module”

Shipping & Delivery

Related products

-17%

MP1584 DC-DC Adjustable Step-Down Buck Converter Module

Converters

Characteristic	Specification Parameters
Converter Circuit Topology	Non-Isolated Step-Down (Buck) Switching Regulator
Input Supply Voltage (VIN)	4.5V to 28.0V DC (Input must remain at least 1.5V higher than output)
Adjustable Output (VOUT)	0.8V to 20.0V DC (Continuously variable scale)
Continuous Output Current	Up to 1.5A to 2.0A stable (Up to 3.0A maximum peak with short pulse durations)
Fixed Switching Frequency	Up to 1.5 MHz High-Speed Internal Clock
Maximum Efficiency Profile	Up to 92% Power Conversion Performance
Built-in System Protections	Thermal shutdown safety and cycle-by-cycle over-current limiting
Chassis Main Dimensions	Approx. 22 mm × 17 mm × 4 mm (Ultra-slim design)

Add to cart

Quick view

-25%

CH340 USB to TTL Serial Converter Module

Characteristic	Specification Parameters
Core Controller IC	Jiangsu Qinheng Co. (WCH) CH340G / CH340C / CH340E
Physical Input Interface	USB Type-A Male, Micro-USB, or USB Type-C Female Port
Supported Baud Rates	50 bps up to 2 Mbps full hardware speed matching
Signal Logic Threshold	3.3V and 5.0V TTL levels (Jumper or Switch configurable)
Onboard Power Outputs	Direct 5V (USB Bus supply) and an integrated 3.3V power rail line
Hardware Handshaking	Full modem interface support pins (DTR, RTS) broken out on select boards
Module Outer Dimensions	Approx. 38 mm × 16 mm × 11 mm (Standard stick form factor)

-20%

FT232RL FTDI USB to TTL Serial Converter Adapter Module

Characteristic	Specification Parameters
Core Protocol Chipset	FTDI FT232RL (Future Technology Devices International)
Physical Input Interface	Mini-USB Female Socket Port Link
Supported Data Rates	300 bps up to 3 Mbps maximum transmission speed
Operating Logic Voltage	Dual 3.3V or 5.0V DC Options (Jumper Selectable)
VCC Output Current Limits	5V mode: Up to ~500mA / 3.3V mode: Up to ~50mA
Host Operating Systems	Windows 10/11, macOS, Linux distributions, and Android
Pin Header Spacing	Standard 2.54 mm (0.1 inch) Pitch

PL2303 USB to TTL Serial Converter Cable

Characteristic	Specification Parameters
Embedded Controller IC	Prolific Technology PL2303HX / PL2303TA / PL2303GS
Host Computer Port	Standard USB Type-A Male Interface
Cable Length Profile	Approximately 1.0 Meter (3.3 Feet)
Logic Signal Threshold	3.3V TTL Level Logic (Standard model assignment)
Integrated Power Output	Fixed 5.0V DC output path pulled from host USB port
Supported Baud Rates	300 bps up to 1 Mbps or 6 Mbps (Depending on PL2303 generation)
Wire Terminal Interface	4 Pin Individual Female JST/Dupont Receptacles

CP2102 USB to TTL Serial Converter Module 6-pin (Black PCB Edition)

Characteristic	Specification Parameters
Core Protocol Chipset	Silicon Labs CP2102 USB-to-UART Bridge Controller
PCB Soldermask Color	Matte Black / Glossy Black
PC Input Connector	Standard USB Type-A Male Interface
Data Rate Range	300 bps up to 1.0 Mbps or 1.5 Mbps stable operations
Internal Data Buffers	512-Byte Receive Buffer / 640-Byte Transmit Buffer
Logic Signal Voltage	3.3V TTL Level Logic (Inputs are safely 5V tolerant)
Module Length & Width	Approx. 42 mm × 15 mm

CP2102 USB to TTL Serial Converter Module

Characteristic	Specification Parameters
Core Controller IC	Silicon Labs CP2102 USB-to-UART Bridge
Physical Input Interface	Micro-USB, Mini-USB, or Type-C Female Port (Variant dependent)
Supported Transfer Rates	300 bps up to 1 Mbps full hardware speed matching
Signal Logic Threshold	3.3V TTL Logic (Inputs are safely 5V tolerant)
Onboard Voltage Outputs	3.3V DC (up to 100mA max) and 5.0V DC (up to 500mA with self-resetting fuse)
Integrated Hardware Buffer	512-byte receive buffer and 512-byte transmit buffer
Module Outer Dimensions	Approx. 26 mm × 15 mm × 11 mm (Ultra-compact form factor)

XL4016 DC 10A 300W Step Down Buck Converter

Characteristic	Specification Parameters
Converter Circuit Core	XL4016E1 Non-Isolated Buck Switching Regulator
Input Supply Voltage (VIN)	7.0V to 40.0V DC (Input must be higher than target output)
Adjustable Output (VOUT)	1.2V to 35.0V DC (Continuously variable via CV trimmer)
Output Current Capacity	0.2A to 8A Continuous (Hits up to 10A Maximum with active fan cooling)
Maximum Output Power	Up to 300W Peak Performance Capacity
Fixed Switching Frequency	180 kHz / 300 kHz (Depending on exact board revision)
Output Voltage Ripple	~50 mV peak-to-peak frequency ripple
Chassis Dimensions	Approx. 65 mm × 47 mm × 24 mm

PL2303 USB to TTL Serial Converter Module

Characteristic	Specification Parameters
Core Controller IC	Prolific Technology PL2303 / PL2303HX / PL2303TA
Physical Input Interface	USB Type-A Male Plug
Supported Transmission Rates	300 bps up to 1 Mbps standard matching speed limits
Logic Threshold Level	3.3V / 5.0V Dual TTL compatible signals
Power Output Delivery	3.3V DC and 5.0V DC output paths
Data Transmission Buffers	128-byte inbound buffer / 256-byte outbound buffer
Status Monitoring	2 Onboard LEDs for real-time TX and RX traffic logging