Name: ESP32-S3 DevKit Development Board
SKU: VE-115
Availability: InStock

ESP32-S3 DevKit Development Board

Technical Specifications

Characteristic	Specification Parameters
Microprocessor Core	Xtensa Dual-Core 32-bit LX7 Processor (Up to 240 MHz)
On-Chip Memory Array	512 KB Internal SRAM / 384 KB ROM
External Module Memory	8 MB Flash + 8 MB PSRAM (Standard N8R8 variant configuration)
Wireless Transceivers	2.4 GHz Wi-Fi 4 (802.11 b/g/n) + Bluetooth 5.0 LE & Mesh
Logic Working Voltage	3.3V DC (Onboard dynamic regulators step down external input)
Power Input Interface	Dual USB Type-C ports (1× USB-to-UART, 1× Native USB OTG)
Module Dimensions	Approx. 57 mm × 28 mm × 10 mm

SKU: VE-115 Category: ESP

The ESP32-S3 DevKitC-1 Development Board is a highly advanced, next-generation system-on-chip (SoC) microcontroller board optimized for Artificial Intelligence of Things (AIoT) applications. Powered by a robust Xtensa 32-bit LX7 dual-core processor, it sets itself apart by integrating dedicated hardware vector instructions to accelerate neural network computing, machine learning, and digital signal processing. Outfitted with dual USB Type-C ports (supporting native USB On-The-Go), it serves as the premier flagship module for image recognition, offline voice wake-word processing, smart robotics, and heavy internet-of-things configurations.

✨ Key Features

AI & Machine Learning Acceleration: Built-in vector extensions substantially accelerate tensor operations, enabling local edge AI execution like voice assistant recognition and gesture tracking.
Native High-Speed USB OTG: Features a native USB 1.1 On-The-Go interface, allowing the board to act directly as a USB host or device (e.g., keyboard, mouse, storage flash disk) without secondary interface chips.
Massive Expandable Memory Mapping: Supports octal SPI configuration, packing up to 8MB or 16MB of external Flash alongside an additional 8MB of high-speed external PSRAM.
Upgraded Bluetooth 5.0 Core: Operates on a long-range Bluetooth 5.0 Low Energy (LE) and Bluetooth Mesh subsystem for improved data throughput and multi-node broadcast capabilities.

-22%

Click to enlarge

Back to products

Original price was: ₹450.00.Current price is: ₹350.00.

Characteristic	Specification Parameters
Microprocessor Core	Xtensa Dual-Core 32-bit LX7 Processor (Up to 240 MHz)
On-Chip Memory Array	512 KB Internal SRAM / 384 KB ROM
External Module Memory	8 MB Flash + 8 MB PSRAM (Standard N8R8 variant configuration)
Wireless Transceivers	2.4 GHz Wi-Fi 4 (802.11 b/g/n) + Bluetooth 5.0 LE & Mesh
Logic Working Voltage	3.3V DC (Onboard dynamic regulators step down external input)
Power Input Interface	Dual USB Type-C ports (1× USB-to-UART, 1× Native USB OTG)
Module Dimensions	Approx. 57 mm × 28 mm × 10 mm

Compare

Add to wishlist

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ESP32-S3 DevKit Development Board”

Shipping & Delivery

Related products

NodeMCU ESP8266 CP2102 Wi-Fi Development Board

ESP

Characteristic	Specification Parameters
Core Processor	Tensilica 32-bit RISC CPU Xtensa LX106 (Clocked at 80 MHz to 160 MHz)
Storage Capacity	4 MB (32 Mbit) SPI Flash Memory / 64 KB SRAM
USB-UART Bridge	Silicon Labs CP2102 Chip
Operating Voltage	3.3V DC internal logic (Onboard LDO regulates 5V USB input)
Digital I/O Layout	16 General Purpose Input/Output Pins (including PWM and 1-ch ADC)
Wi-Fi Networking	IEEE 802.11 b/g/n (Supports Station, Soft-AP, and Dual modes)
Dimensions (approx.)	49 mm × 24.5 mm × 13 mm

Add to cart

Quick view

-16%

ESP32 NodeMCU 38-Pin Development Board

Characteristic	Specification Parameters
Microprocessor Core	Xtensa Dual-Core 32-bit LX6 Architecture (Up to 240 MHz)
Memory Capacity	520 KB SRAM / 4 MB SPI Flash Memory
Wireless Protocols	Wi-Fi 802.11 b/g/n + Bluetooth v4.2 BR/EDR & BLE
Logic Voltage Level	3.3V DC (Inputs are not 5V tolerant)
Input Supply Limits	5.0V DC via Micro-USB or 5.0V to 9.0V DC via Vin pin
USB-Serial Chipset	CP2102 or CH340 USB-to-UART Bridge controller
Module Frame Footprint	Approx. 55 mm × 28 mm × 13 mm (Slightly longer form factor)

-13%

ESP32-S3 DevKitC-1 WiFi + Bluetooth Development Board

Characteristic	Specification Parameters
Microprocessor Core	Xtensa Dual-Core 32-bit LX7 Processor (Up to 240 MHz)
On-Chip Memory Array	512 KB Internal SRAM / 384 KB ROM
External Module Memory	8 MB Flash + 8 MB PSRAM (Standard N8R8 variant configuration)
Wireless Transceivers	2.4 GHz Wi-Fi 4 (802.11 b/g/n) + Bluetooth 5.0 LE & Mesh
Logic Working Voltage	3.3V DC (Onboard dynamic regulators step down external input)
Power Input Interface	Dual USB Type-C ports (1× USB-to-UART, 1× Native USB OTG)
Module Dimensions	Approx. 57 mm × 28 mm × 10 mm

-17%

ESP32-C3 Mini Development Board

Characteristic	Specification Parameters
Microprocessor Core	Espressif ESP32-C3 32-bit RISC-V Single-Core (Up to 160 MHz)
On-Chip Memory Array	400 KB SRAM / 384 KB ROM / 4 MB Onboard Flash
Wireless Transceivers	2.4 GHz Wi-Fi 4 (802.11 b/g/n) + Bluetooth 5.0 & BLE
Operating Voltage	3.3V DC Logic level (Internal regulator converts input power)
External Power Input	5V via USB-C or 3.3V to 6.0V via VIN pin
Peripheral Interfacing	11 Accessible GPIOs, 6-ch PWM, 2× 12-bit ADCs, SPI, I2C, UART
Module Dimensions	Approx. 22.5 mm × 18 mm (Super-mini form factor)

ESP32 NodeMCU Wi-Fi + Bluetooth Development Board 30 pin

Characteristic	Specification Parameters
Microprocessor Core	Xtensa Dual-Core 32-bit LX6 Microprocessor (Up to 240 MHz)
Memory Capacity	520 KB SRAM / 4 MB External Flash Storage Memory
Wireless Protocols	Wi-Fi 802.11 b/g/n (Up to 150 Mbps) + Bluetooth v4.2 & BLE
Logic Working Voltage	3.3V DC (Onboard 1117 regulator accepts 5V USB input)
GPIO Interface Array	30-Pin layout with multi-functional breakout mappings
USB-UART Interface	Onboard Silabs CP2102 USB-to-Serial converter chip
Module Dimensions	Approx. 51 mm × 28 mm × 13 mm (Breadboard friendly)

-20%

ESP32-CAM-MB Micro USB Programmer Base Board

Camera Module, ESP

Characteristic	Specification Parameters
Compatible Companion Hardware	AI-Thinker Form-Factor ESP32-CAM W/ OV2640 / OV3660
USB Communication Port	Micro-USB or USB Type-C Interfacing (Variant dependent)
Onboard USB-to-Serial Driver	Silicon Labs CH340 Series (CH340G / CH340C)
Input Supply Voltage (VBUS)	5.0V DC via USB Bus line
Onboard Voltage Regulation	Drops 5V down to 3.3V Output (Feeds ESP32-CAM power tracks)
Hardware Buttons Profile	1× Reset Button, 1× Boot Button (Varies by hardware revision)
Physical Dimensions (approx.)	40 mm × 27 mm × 16 mm

-21%

ESP8266 ESP-01 Serial Wi-Fi Transceiver Module

Characteristic	Specification Parameters
Core Processor	Tensilica 32-bit RISC CPU Xtensa LX106 (Clocked at 80 MHz)
Onboard Flash Memory	512 KB to 1 MB SPI Flash (Variant dependent)
Operating Voltage (VCC)	Strictly 3.3V DC (Inputs are not 5V tolerant)
Current Consumption	~70 mA average (Spikes up to 200 mA during wireless transmission)
Wi-Fi Protocol Standard	IEEE 802.11 b/g/n (Operating at 2.4 GHz frequency band)
Output Power Capability	+19.5 dBm in 802.11b operational mode
Module Outer Dimensions	Approx. 25 mm × 15 mm × 11 mm

NodeMCU ESP8266 CH340 Wi-Fi Development Board

Characteristic	Specification Parameters
Core Processor	Tensilica 32-bit RISC CPU Xtensa LX106 (80 MHz to 160 MHz)
Storage Capacity	4 MB (32 Mbit) SPI Flash Memory / 64 KB SRAM
USB-UART Bridge	CH340 Serial Converter Chip
Operating Voltage	3.3V DC Internal Logic (Onboard regulator steps down 5V USB input)
Digital I/O Layout	16 General Purpose Input/Output Pins (supports PWM and 1-ch ADC)
Wi-Fi Networking	IEEE 802.11 b/g/n (Supports Station, Soft-AP, and Dual modes)
Dimensions (approx.)	58 mm × 31 mm × 13 mm (Wider V3/Lolin form factor)