Name: TB6600 4A Stepper Motor Driver Controller
SKU: VE-103
Availability: InStock

TB6600 4A Stepper Motor Driver Controller

Technical Specifications

Characteristic	Specification Parameters
Driver Topology Type	Bipolar Constant-Current H-Bridge Chopper Drive
Input Operating Voltage	9.0V to 42.0V DC (12V to 24V DC highly recommended)
Adjustable Peak Current	0.5A to 4.0A Max (8 selectable current steps via DIP choices)
Microstep Resolutions	1, 2/A, 2/B, 4, 8, 16, 32 (Up to 6400 pulses per single revolution)
Control Signal Input Level	3.3V to 24.0V DC (Fully logic compatible with 5V Arduino / 3.3V ESP32)
Maximum Pulse Frequency	Up to 200 kHz
Onboard Fault Protection	Over-temperature parking, over-current, under-voltage, and short-circuit protection

The TB6600 4A Stepper Motor Driver Controller is a professional, heavy-duty industrial step actuator driver designed to govern high-power two-phase and four-phase hybrid stepper motors. Encased in a rugged semi-enclosed metallic block shell with a massive integrated cooling heatsink, it acts as a dynamic current chopper circuit between a micro-controller (like Arduino) and high-load motors. It is the benchmark standard for driving heavy axes on mid-sized CNC routers, laser cutters, 3D printers, and industrial automated multi-link assemblies.

✨ Key Features

Granular Microstepping Control: Supports adjustable segment microstepping resolutions up to 1/32 steps to yield incredibly fluid rotational curves and eliminate motor resonance.
High-Speed Optocoupler Isolation: Features high-speed optical isolation barrier lines (like 6N137 chips) on all incoming signal logic to block high-frequency electromagnetic loop interference.
Hardware DIP Configuration Tables: Outfitted with 6 side-mounted mechanical DIP switches allowing immediate hardware configuration of step sizing and running current without flashing new microchip code.
Automatic Semi-Flow Power Locking: Built-in automatic half-current lock mechanism that drops current throughput by 50% when the motor is standing idle, drastically reducing winding heat.

-18%

Click to enlarge

Back to products

Original price was: ₹550.00.Current price is: ₹450.00.

Characteristic	Specification Parameters
Driver Topology Type	Bipolar Constant-Current H-Bridge Chopper Drive
Input Operating Voltage	9.0V to 42.0V DC (12V to 24V DC highly recommended)
Adjustable Peak Current	0.5A to 4.0A Max (8 selectable current steps via DIP choices)
Microstep Resolutions	1, 2/A, 2/B, 4, 8, 16, 32 (Up to 6400 pulses per single revolution)
Control Signal Input Level	3.3V to 24.0V DC (Fully logic compatible with 5V Arduino / 3.3V ESP32)
Maximum Pulse Frequency	Up to 200 kHz
Onboard Fault Protection	Over-temperature parking, over-current, under-voltage, and short-circuit protection

Compare

Add to wishlist

SKU: VE-103 Category: Motor Driver module

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “TB6600 4A Stepper Motor Driver Controller”

Shipping & Delivery

Related products

-20%

L298N Dual H-Bridge Motor Driver Module

Motor Driver module

Characteristic	Specification Parameters
Driver Driver IC	L298N Dual H-Bridge Power IC
Motor Supply Voltage (VMS)	5.0V to 35.0V DC (External power input)
Logic Supply Voltage (VSS)	5.0V DC
Peak Output Current	2.0A per individual channel (up to 3.0A peak surge duration)
Total Power Dissipation	25W (at max thermal capacity with integrated aluminum heatsink)
Control Logic Input Level	5V TTL and CMOS Compatible Logic inputs
Module Frame Footprint	43 mm × 43 mm × 27 mm

Add to cart

Quick view

PCA9685 16-Channel 12-bit PWM Servo Driver Module

Characteristic	Specification Parameters
Driver Controller IC	NXP PCA9685 16-Channel PWM/LED Controller
Communication Bus	I2C Protocol (Standard 100 kHz or Fast-Mode 400 kHz)
Logic Supply Voltage (VCC)	3.0V to 5.5V DC (Compatible with 3.3V and 5V systems)
Servo Supply Voltage (V+)	Up to 6.0V DC Max (External high-current power input)
PWM Resolution Output	12-bit (4,096 distinct timing increments)
Adjustable Frequency	24 Hz to 1,526 Hz (Configurable for servos or LEDs)
Module Frame Footprint	62 mm × 25 mm

-52%

DRV8833 Dual H-Bridge DC Motor Driver Module

Characteristic	Specification Parameters
Driver Driver IC	Texas Instruments DRV8833 Dual H-Bridge Chip
Motor Supply Voltage (VM)	2.7V to 10.8V DC (Ideal for Li-Ion, NiMH, or AA battery packs)
Continuous Output Current	1.2A per individual motor channel (at 25°C room temperature)
Peak Pulse Current Limit	2.0A per channel for short pulse durations
Control Logic Input Level	3.3V and 5V Logic Compatible (Works with Arduino, ESP32, Raspberry Pi)
PWM Frequency Support	Up to 50 kHz for smooth speed adjustments
Module Dimensions (approx.)	18.5 mm × 16 mm × 3.5mm

-17%

BTS7960 43A High-Power H-Bridge Motor Driver Module

Characteristic	Specification Parameters
Driver Configuration	Dual BTS7960 Half-Bridge Chips (Forming one Full H-Bridge)
Motor Supply Voltage (B+)	5.5V to 27.0V DC (External high-power battery or SMPS)
Logic Operating Voltage	5.0V DC
Continuous Current Rating	15A to 20A (Up to 43A maximum instantaneous peak surge)
PWM Frequency Limit	Up to 25 kHz (Supports smooth and precise duty cycles)
Output MOSFET RDS(on)	16 mΩ typical (Ultra-low internal resistance for low heat)
Module Frame Footprint	50 mm × 50 mm × 43 mm

ULN2003 Driver

Characteristic	Specification Parameters
Driver Driver IC	ULN2003A (High-Voltage, High-Current Array)
Operating Input Voltage	5.0V to 12.0V DC (Power supply lines isolated from logic inputs)
Max Output Sinking Current	500 mA per channel (Peak current capacity up to 600 mA)
Max Output Standing Voltage	50V DC Peak
Compatible Motor Styles	4-Phase, 5-Wire Unipolar Stepper Motors (e.g., 28BYJ-48)
Logic Control Formats	5V CMOS and TTL Level Logic Inputs
Module Dimensions (approx.)	35 mm × 32 mm × 10 mm

A4988 DMOS Microstepping Stepper Motor Driver Module

Characteristic	Specification Parameters
Driver Driver IC	Allegro A4988 Microstepping Driver Chip
Motor Supply Voltage (VMOT)	8.0V to 35.0V DC (External power rail for driven actuators)
Logic Supply Voltage (VDD)	3.0V to 5.5V DC (Fully compatible with 3.3V and 5V microchips)
Continuous Output Current	1.0A per phase winding (Up to 2.0A with attached heatsink and active cooling)
Microstep Resolutions	Full-step, Half-step, Quarter-step, Eighth-step, and Sixteenth-step
Onboard Fault Protection	Thermal shutdown, crossover-current protection, and under-voltage lockout
Module Dimensions (approx.)	20 mm × 15 mm × 11 mm (Ultra-compact DIP carrier form factor)

DRV8825 Microstepping Stepper Motor Driver Module

Characteristic	Specification Parameters
Driver Driver IC	Texas Instruments DRV8825 Motor Driver
Motor Driving Voltage (VMOT)	8.2V to 45.0V DC (External motor power feed)
Logic Working Voltage	0V to 5.5V DC (Does not require a separate VCC logic pin)
Continuous Output Current	1.5A per phase winding (Up to 2.2A with active cooling fan/heatsink)
Microstep Resolutions	Full-step, 1/2, 1/4, 1/8, 1/16, and 1/32 steps (3 Selectable Pins)
Hardware Safety Checks	Over-temperature shutdown, over-current fault, and short-circuit protection
Module Dimensions (approx.)	20 mm × 15 mm × 11 mm

TB6612FNG Dual DC Motor Driver

Characteristic	Specification Parameters
Driver Driver IC	Toshiba TB6612FNG Dual H-Bridge Chip
Motor Supply Voltage (VM)	2.5V to 15.0V DC (Power feed for driven actuators)
Logic Supply Voltage (VCC)	2.7V to 5.5V DC (Compatible with 3.3V and 5V microchips)
Continuous Output Current	1.2A per individual motor channel
Peak Pulse Current Limit	3.2A per individual channel (for short single-pulse durations)
Maximum PWM Frequency	Up to 100 kHz (Supports silent motor operation profiles)
Module Dimensions (approx.)	20 mm × 20 mm × 10 mm (Ultra-compact footprint)