Showing 61–72 of 206 results
5V 10A Enclosed Metal Chassis SMPS
⚙️ Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 110V AC to 220V AC (Standard 220V single-phase input for India) |
| Input AC Frequency | 50 Hz / 60 Hz |
| Output DC Voltage | 5V DC Fixed Base (Adjustable via +V ADJ) |
| Maximum Output Current | 5.0 Amperes (5000 mA) Continuous |
| Total Rated Power Capacity | 25 Watts Max |
| Interface Port Type | 5-Pin Screw Terminal Barrier Block |
| Terminal Designations | L / N (AC Mains), FG / ⏚ (Earth), -V / COM (Ground), +V (5V Rail) |
| Form Factor Design | Enclosed Metal Mesh Chassis (Mountable via bottom/side screw points) |
5V 1A DC Power Adapter
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 100V AC to 240V AC (Standard Domestic Mains Grid) |
| Input AC Frequency | 50 Hz / 60 Hz |
| Output DC Voltage | 5V DC |
| Maximum Output Current | 1.0 Ampere (1000 mA) Continuous |
| Total Rated Power Capacity | 5 Watts Max |
| Typical Interface Outlets | USB-A port / Micro-USB Cable / Type-C Cable / 5.5x2.1mm Barrel |
| Barrel Pin Polarity (If Used) | Center-Positive (Inner pin (+), Outer shield (-)) |
| Energy Efficiency Rating | Level VI compliance (minimal standby vampire power draw) |
5V 20A DC Power Supply (High-Capacity Industrial SMPS)
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 110V AC / 220V AC (Selectable via an internal toggle switch or auto-ranging) |
| Input AC Frequency | 50 Hz / 60 Hz |
| Output DC Voltage | 5V DC Base Rail (Adjustable via +V ADJ) |
| Maximum Output Current | 20.0 Amperes (20,000 mA) Continuous |
| Total Rated Power Capacity | 100 Watts Max Continuous Output |
| Interface Port Type | 7-Pin or 9-Pin Screw Terminal Barrier Block |
| Terminal Designations | L / N (AC Mains), FG / ⏚ (Earth), -V / COM (Ground ×2), +V (5V Output Rail ×2) |
| Form Factor Style | Enclosed Metal Mesh Chassis with mounting arrays |
5V 2A DC Power Adapter
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 100V AC to 240V AC (Standard Domestic Home Grid) |
| Input AC Frequency | 50 Hz / 60 Hz |
| Output DC Voltage | 5V DC Fixed |
| Maximum Output Current | 2.0 Amperes (2000 mA) Continuous |
| Total Rated Power Capacity | 10 Watts Max |
| Typical Connector Formats | USB-A Port / Micro-USB / USB Type-C / 5.5×2.1mm Barrel |
| Barrel Pin Polarity (If Used) | Center-Positive (Inner pin (+), Outer ring (-)) |
| Energy Efficiency Grade | Level VI compliance (ultra-low idle standby power draw) |
5V 30A Single-Channel High-Power Relay Module
⚙️ Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Coil Operating Voltage | 5V DC Stable |
| Active Working Current | ~180 mA to 190 mA when coil is energized |
| Quiescent/Static Current | ~5 mA baseline idle draw |
| Trigger Current Threshold | 2 mA to 5 mA from microcontroller I/O pin |
| Max AC Switching Load | 30A @ 250V AC (Normally Open contact) |
| Max DC Switching Load | 30A @ 30V DC (Normally Open contact) |
| Output Terminals Config | NC (Normally Closed), COM (Common), NO (Normally Open) |
| Input Interface Pins | DC+ / VCC (+5V), DC- / GND (Ground), IN (Signal Input) |
5V 5A Metal Chassis SMPS
⚙️ Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 110V AC to 220V AC (Standard 220V single-phase input for India) |
| Input AC Frequency | 50 Hz / 60 Hz |
| Output DC Voltage | 5V DC Fixed Base (Adjustable via +V ADJ) |
| Maximum Output Current | 5.0 Amperes (5000 mA) Continuous |
| Total Rated Power Capacity | 25 Watts Max |
| Interface Port Type | 5-Pin Screw Terminal Barrier Block |
| Terminal Designations | L / N (AC Mains), FG / ⏚ (Earth), -V / COM (Ground), +V (5V Rail) |
| Form Factor Design | Enclosed Metal Mesh Chassis (Mountable via bottom/side screw points) |
5V 8-Channel Relay Module
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Coil Operating Voltage | 5V DC Stable |
| Trigger Current Consumption | ~15 mA to 20 mA per individual active channel |
| Total Max Current (All On) | ~600 mA to 700 mA continuous load draw |
| Max AC Switching Load | 10A @ 250V AC or 10A @ 125V AC (Per Channel) |
| Max DC Switching Load | 10A @ 30V DC or 10A @ 28V DC (Per Channel) |
| Output Terminal Blocks | 8 sets of NC (Normally Closed), COM (Common), NO (Normally Open) |
| Input Signal Header | VCC, GND, IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 |
5V Dual-Channel (Double Channel) Relay Module
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Coil Operating Voltage | 5V DC Stable |
| Trigger Current Consumption | ~15 mA to 20 mA per individual active channel |
| Max AC Switching Load | 10A @ 250V AC or 10A @ 125V AC (Per Channel) |
| Max DC Switching Load | 10A @ 30V DC or 10A @ 28V DC (Per Channel) |
| Output Terminal Arrays | 2 sets of NC (Normally Closed), COM (Common), NO (Normally Open) |
| Input Header Pins | VCC (5V Logic), GND (Ground), IN1 (Chan 1), IN2 (Chan 2) |
| Relay Component Model | Typically SRD-05VDC-SL-C (Songle or equivalent standard) |
5V Four-Channel Relay Module
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Coil Operating Voltage | 5V DC Stable |
| Trigger Current Draw | ~15 mA to 20 mA per individual active channel |
| Total Max Current (All On) | ~300 mA to 350 mA continuous draw (including logic) |
| Max AC Switching Load | 10A @ 250V AC or 10A @ 125V AC (Per Channel) |
| Max DC Switching Load | 10A @ 30V DC or 10A @ 28V DC (Per Channel) |
| Output Terminal Arrays | 4 blocks of NC (Normally Closed), COM (Common), NO (Normally Open) |
| Input Header Pins | VCC, GND, IN1, IN2, IN3, IN4 |
5V Single-Channel Relay Module
⚙️ Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Coil Operating Voltage | 5V DC Baseline |
| Trigger Current Draw | ~15 mA to 20 mA when active |
| Max AC Switching Load | 10A @ 250V AC or 10A @ 125V AC |
| Max DC Switching Load | 10A @ 30V DC or 10A @ 28V DC |
| Output Terminals Config | NC (Normally Closed), COM (Common), NO (Normally Open) |
| Input Signal Pins | VCC (5V Power), GND (Ground), IN (Trigger Signal) |
| Response Activation Time | ~10 milliseconds (Pick-up) / ~5 milliseconds (Release) |
5V Sugar Cube Relay
Technical Specifications
| Parameter | Specification Value |
|---|---|
| Contact Form / Type | 1 Form C (SPDT - Single Pole Double Throw) |
| Nominal Coil Voltage | 5V DC |
| Coil Resistance | Approx. 70 Ω to 80 Ω |
| Coil Power Consumption | Approx. 0.36W (360mW) |
| Nominal Operating Current | Approx. 71.4mA to 90mA |
| Max Switching Voltage | 250V AC / 30V DC |
| Max AC Switching Current | 10A at 120V/250V AC |
| Max DC Switching Current | 10A at 28V/30V DC |
| Contact Resistance | ≤ 100 mΩ |
| Operate / Release Time | ≤ 10ms / ≤ 5ms |
| Mechanical Life | ~ 10,000,000 operations |
| Electrical Life | ~ 100,000 operations at max rated load |
| Dimensions | Approx. 19.1mm × 15.5mm × 15.5mm |
60 RPM 12V DC Centre Shaft Geared Motor
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Motor Type | Brushed DC Motor with Metal Spur Gearbox |
| Operating Voltage | 6.0V to 24.0V DC (12V DC Nominal Output) |
| Base Speed (at 12V) | 60 RPM |
| Rated Stall Torque | 4 kg-cm to 5 kg-cm |
| No-Load / Load Current | 60 mA (Max) / 300 mA (Max) |
| Shaft Dimensions | 6 mm Diameter with internal M3 tapped hole |
| Main Frame Dimensions | 35 mm Gearbox Diameter × 72 mm Overall Body Length |
