Showing 1–12 of 206 results
10 RPM 12V DC Centre Shaft Geared Motor
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Motor Type | Brushed DC Motor with Metal Spur Gearbox |
| Operating Voltage | 6.0V to 24.0V DC (12V DC Nominal Output) |
| Base Speed (at 12V) | 10 RPM |
| Rated Stall Torque | 7 kg-cm to 8 kg-cm |
| No-Load / Load Current | 60 mA (Max) / 300 mA (Max) |
| Shaft Dimensions | 6 mm Diameter with internal M3 tapped hole |
| Main Frame Dimensions | 35 mm Gearbox Diameter × 72 mm Overall Body Length |
100 RPM 12V DC Centre Shaft Geared Motor
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Motor Type | Brushed DC Motor with Metal Spur Gearbox |
| Operating Voltage | 6.0V to 24.0V DC (12V DC Nominal Output) |
| Base Speed (at 12V) | 100 RPM |
| Rated Stall Torque | 2.5 kg-cm to 3 kg-cm |
| No-Load / Load Current | 60 mA (Max) / 300 mA (Max) |
| Shaft Dimensions | 6 mm Diameter with internal M3 tapped hole |
| Main Frame Dimensions | 35 mm Gearbox Diameter × 72 mm Overall Body Length |
1000 RPM 12V DC Centre Shaft Geared Motor
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Motor Type | Brushed DC Motor with Metal Spur Gearbox |
| Operating Voltage | 6.0V to 24.0V DC (12V DC Nominal Output) |
| Base Speed (at 12V) | 1000 RPM |
| Rated Stall Torque | 0.2 kg-cm to 0.3 kg-cm |
| No-Load / Load Current | 60 mA (Max) / 300 mA (Max) |
| Shaft Dimensions | 6 mm Diameter with internal M3 tapped hole |
| Main Frame Dimensions | 35 mm Gearbox Diameter × 72 mm Overall Body Length |
11.1V 3300mAh Lithium Polymer Battery Pack
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Battery Chemistry Family | Lithium-Polymer (Li-Po High-Discharge Pouch Matrix) |
| Cell Configuration Matrix | 3S1P (3 Cells wired in Series / 1 in Parallel) |
| Nominal Pack Voltage | 11.1V DC |
| Full Charge Voltage Ceiling | 12.6V DC (4.2V maximum per individual internal cell) |
| Critical Discharge Limit | 9.0V DC (3.0V minimum per cell; lower drops permanently kill capacity) |
| Total Stored Energy | 19.62 Wh (Watt-Hours) |
| Continuous Discharge Rating | 35C (Yields up to 147 Amps of continuous current draw) |
| Peak Burst Rating | ~70C (Instantaneous short duration acceleration current) |
| Wire & Connector Profile | 12 AWG Silicone Wire Lead with XT60 or Deans Connector |
12V 1.2Ah Sealed Lead-Acid Rechargeable Battery
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Battery Chemistry Core | Sealed Lead Acid (SLA) / AGM VRLA Technology |
| Nominal System Voltage | 12.0V DC |
| Rated Storage Capacity | 1.2 Ah at a standard 20-hour discharge rate |
| Standby Float Charge Range | 13.5V to 13.8V DC at 25°C |
| Cyclic Charging Window | 14.4V to 15.0V DC Max |
| Maximum Charging Current | 0.36A (Too much charging current causes thermal swelling) |
| Terminal Connector Block | Standard F1 Faston Tabs (4.75 mm / 0.187 inch width) |
| Chassis Main Dimensions | Approx. 97 mm × 43 mm × 52 mm (Standard Pocket Box Size) |
| Average Operational Weight | Approx. 0.55 kg (1.21 lbs) |
12V 10A DC Power Adapter
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 100V AC to 240V AC (Standard Indian Single-Phase Mains) |
| Input AC Frequency | 50 Hz / 60 Hz |
| Output DC Voltage | 12V DC Fixed |
| Maximum Output Current | 10.0 Amperes (10,000 mA) Continuous |
| Total Rated Power Capacity | 120 Watts Max |
| Connector Dimension Profile | Standard 5.5 mm (Outer Diameter) × 2.5 mm or 2.1 mm (Inner Pin) |
| Connector Core Polarity | Center-Positive (Inner pin (+), Outer sleeve (-)) |
| Form Factor Style | Desktop Brick Type (requires a heavy-duty 3-pin IEC C13 power cord) |
12V 10A DC Power SMPS
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 100V AC to 240V AC (Standard Indian Single-Phase Mains) |
| Input AC Frequency | 50 Hz / 60 Hz |
| Output DC Voltage | 12V DC Fixed |
| Maximum Output Current | 10.0 Amperes (10,000 mA) Continuous |
| Total Rated Power Capacity | 120 Watts Max |
| Connector Dimension Profile | Standard 5.5 mm (Outer Diameter) × 2.5 mm or 2.1 mm (Inner Pin) |
| Connector Core Polarity | Center-Positive (Inner pin (+), Outer sleeve (-)) |
| Form Factor Style | Desktop Brick Type (requires a heavy-duty 3-pin IEC C13 power cord) |
12V 1A DC Power Adapter
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 100V AC to 240V AC (Standard Indian Single-Phase Mains) |
| Input AC Frequency | 50 Hz / 60 Hz |
| Output DC Voltage | 12V DC |
| Maximum Output Current | 1.0 Ampere (1000 mA) Continuous |
| Total Rated Power Capacity | 12 Watts Max |
| Connector Dimension Profile | 5.5 mm (Outer Diameter) × 2.1 mm (Inner Pin Diameter) |
| Connector Core Polarity | Center-Positive (Inner sleeve (+), Outer ring (-)) |
| Average Output Cable Length | ~1.0 Meter to 1.5 Meters |
12V 20A Enclosed Metal Chassis SMPS (High-Capacity Industrial Power Supply)
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 110V AC / 220V AC (Selectable via toggle switch, standard 220V for India) |
| Output DC Voltage | 12V DC Base Rail (Adjustable via +V ADJ) |
| Maximum Output Current | 20.0 Amperes (20,000 mA) Continuous |
| Total Rated Power Capacity | 240 Watts Max Continuous Output |
| Interface Port Type | 7-Pin or 9-Pin Screw Terminal Barrier Block |
| Terminal Designations | L / N (AC Mains), FG / ⏚ (Earth), -V / COM (Ground), +V (12V Output Rail) |
| Form Factor Style | Enclosed Metal Mesh Chassis with mounting arrays |
12V 2A DC Power Adapter
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 100V AC to 240V AC (Standard Indian Single-Phase Mains) |
| Input AC Frequency | 50 Hz / 60 Hz |
| Output DC Voltage | 12V DC Fixed |
| Maximum Output Current | 2.0 Amperes (2000 mA) Continuous |
| Total Rated Power Capacity | 24 Watts Max |
| Connector Dimension Profile | Standard 5.5 mm (Outer Diameter) × 2.1 mm (Inner Pin Diameter) |
| Connector Core Polarity | Center-Positive (Inner sleeve (+), Outer ring (-)) |
| Average Output Cable Length | ~1.2 Meters to 1.5 Meters |
12V 30A Metal Chassis SMPS
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 110V AC / 220V AC (Selectable via toggle switch, standard 220V for India) |
| Output DC Voltage | 12V DC Base Rail (Adjustable via +V ADJ) |
| Maximum Output Current | 30.0 Amperes (30,000 mA) Continuous |
| Total Rated Power Capacity | 360 Watts Max Continuous Output |
| Interface Port Type | 9-Pin Screw Terminal Barrier Block |
| Terminal Designations | L / N (AC Mains), FG / ⏚ (Earth), -V / COM (Ground ×3), +V (12V Output Rail ×3) |
| Form Factor Style | Enclosed Metal Mesh Chassis with mounting arrays |
12V 3A DC Power Adapter
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 100V AC to 240V AC (Standard Indian Single-Phase Mains) |
| Input AC Frequency | 50 Hz / 60 Hz |
| Output DC Voltage | 12V DC Fixed |
| Maximum Output Current | 3.0 Amperes (3000 mA) Continuous |
| Total Rated Power Capacity | 36 Watts Max |
| Connector Dimension Profile | Standard 5.5 mm (Outer Diameter) × 2.1 mm or 2.5 mm (Inner Pin) |
| Connector Core Polarity | Center-Positive (Inner sleeve (+), Outer ring (-)) |
| Form Factor Style | Wall-Mount Large Brick or Desktop Type (with 3-pin AC cord) |
🛠️ Core Interfacing Guide
Operating safely with a 36W power supply requires tracking absolute electronic load rules:
- The Voltage Rules Must Match: Only plug this adapter into devices explicitly rated for 12V DC input. Connecting a 12V adapter to a 5V device (like an entry-level development board or smartphone) will instantly destroy its internal microchips.
- Current is Pulled, Not Pushed: The 3A rating is a maximum capacity ceiling. If you plug it into a 12V device that only draws 1A or 2A (like a standard router), the device will safely draw only its required current without damage. However, do not exceed 3A by connecting heavy loads like large 12V DC cooling fans or high-torque water pumps, or the adapter will overheat and shut down.
- Check the Pin Inner Dimension: Many high-power 12V appliances and CCTV DVRs utilize a 5.5mm × 2.5mm jack instead of the standard consumer 5.5mm × 2.1mm size. Ensure your device's receiving power jack matches the adapter's pin dimensions to maintain a secure electrical contact.
