Showing 13–24 of 206 results
12V 5A DC Power Adapter
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 100V AC to 240V AC (Standard Indian Single-Phase Mains) |
| Input AC Frequency | 50 Hz / 60 Hz |
| Output DC Voltage | 12V DC Fixed |
| Maximum Output Current | 5.0 Amperes (5000 mA) Continuous |
| Total Rated Power Capacity | 60 Watts Max |
| Connector Dimension Profile | Standard 5.5 mm (Outer Diameter) × 2.1 mm or 2.5 mm (Inner Pin) |
| Connector Core Polarity | Center-Positive (Inner sleeve (+), Outer ring (-)) |
| Form Factor Style | Desktop Type (requires a 3-pin IEC C13 or C5 AC power cord) |
12V 5A Metal Chassis SMPS
⚙️ Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 110V AC to 220V AC (Selectable via an internal slider switch or auto-ranging) |
| Output DC Voltage | 12V DC Fixed Base (Adjustable via +V ADJ) |
| Maximum Output Current | 5.0 Amperes (5000 mA) Continuous |
| Total Rated Power Capacity | 60 Watts Max |
| Interface Port Type | 5-Pin or 7-Pin Screw Terminal Barrier Block |
| Terminal Designations | L / N (AC Mains), FG / ⏚ (Earth), -V / COM (Ground), +V (12V Rail) |
| Form Factor Design | Enclosed Metal Mesh Chassis (Mountable via bottom/side screw holes) |
12V 7Ah Sealed Lead-Acid Rechargeable Battery
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Battery Chemistry Core | Sealed Lead Acid (SLA) / AGM VRLA Technology |
| Nominal System Voltage | 12.0V DC |
| Rated Storage Capacity | 7.0 Ah at a standard 20-hour discharge rate |
| Standby Float Charge Range | 13.5V to 13.8V DC at 25°C (Recommended for UPS/Standby) |
| Cyclic Charging Window | 14.4V to 15.0V DC Max (Recommended for Solar/Cyclic) |
| Maximum Charging Current | 2.1A (Exceeding this ceiling causes thermal swelling and gas build-up) |
| Terminal Connector Block | Standard F2 Faston Tabs (6.35 mm width) or F1 Tabs (4.75 mm width) |
| Chassis Main Dimensions | Approx. 151 mm × 65 mm × 94 mm (Standard Universal Blocks) |
| Average Operational Weight | Approx. 2.0 kg to 2.2 kg (Heavy internal lead grid density) |
12V 8-Channel Relay Module
⚙️ Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Coil Operating Voltage | 12V DC Native |
| Trigger Current Consumption | ~30 mA to 40 mA per individual active channel |
| Total Max Current (All On) | ~300 mA to 350 mA continuous load draw |
| Max AC Switching Load | 10A @ 250V AC or 10A @ 125V AC (Per Channel) |
| Max DC Switching Load | 10A @ 30V DC or 10A @ 28V DC (Per Channel) |
| Output Terminal Blocks | 8 sets of NC (Normally Closed), COM (Common), NO (Normally Open) |
| Input Signal Header | VCC (+12V Power), GND (Ground), IN1 to IN8 (Trigger Signal Pins) |
| Relay Component Model | Typically SRD-12VDC-SL-C (Songle or matching industry standard) |
12V Dual-Channel (Double-Channel) Relay Module
⚙️ Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Coil Operating Voltage | 12V DC Native |
| Trigger Current Consumption | ~30 mA to 40 mA per individual active channel |
| Total Max Current (Both On) | ~80 mA continuous draw |
| Max AC Switching Load | 10A @ 250V AC or 10A @ 125V AC (Per Channel) |
| Max DC Switching Load | 10A @ 30V DC or 10A @ 28V DC (Per Channel) |
| Output Terminal Arrays | 2 blocks of NC (Normally Closed), COM (Common), NO (Normally Open) |
| Input Signal Header | VCC (+12V Power), GND (Ground), IN1 (Chan 1), IN2 (Chan 2) |
| Relay Component Model | Typically SRD-12VDC-SL-C (Songle or matching industry standard) |
12V Four-Channel Relay Module
⚙️ Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Coil Operating Voltage | 12V DC Native |
| Trigger Current Consumption | ~30 mA to 40 mA per individual active channel |
| Total Max Current (All On) | ~150 mA to 180 mA continuous load draw |
| Max AC Switching Load | 10A @ 250V AC or 10A @ 125V AC (Per Channel) |
| Max DC Switching Load | 10A @ 30V DC or 10A @ 28V DC (Per Channel) |
| Output Terminal Arrays | 4 blocks of NC (Normally Closed), COM (Common), NO (Normally Open) |
| Input Signal Header | VCC (+12V Power), GND (Ground), IN1, IN2, IN3, IN4 |
| Relay Component Model | Typically SRD-12VDC-SL-C (Songle or matching industry |
| standard) |
12V Lithium-Ion Battery Pack with DC Barrel Jack
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Internal Cell Assembly | Lithium-Ion 18650 Format in a 3S arrangement (3 Series) |
| Nominal System Voltage | 11.1V DC to 12.0V DC |
| Full Charge Peak Ceiling | 12.6V DC Max Voltage Profile |
| Discharge Cut-Off Safety | ~9.0V DC BMS Threshold Limit |
| Popular Capacity Offerings | Ranges of 2000mAh |
| Interface Port Connector | 5.5 mm × 2.1 mm DC Barrel Plug (Center-Positive configuration) |
| Continuous Discharge Limit | ~2A to 5A Continuous Output Current (BMS variant dependent) |
12V Single-Channel Relay Module
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Coil Operating Voltage | 12V DC Native |
| Trigger Current Consumption | ~30 mA to 40 mA when actively energized |
| Max AC Switching Load | 10A @ 250V AC or 10A @ 125V AC |
| Max DC Switching Load | 10A @ 30V DC or 10A @ 28V DC |
| Output Terminals Config | NC (Normally Closed), COM (Common), NO (Normally Open) |
| Input Interface Pins | VCC (+12V Power), GND (Ground), IN (Trigger Input Signal) |
| Relay Component Model | Typically SRD-12VDC-SL-C (Songle or matching industry standard) |
12V SPDT Sugar Cube Relay
Technical Specifications
| Parameter | Specification Value |
|---|---|
| Contact Form / Type | 1 Form C (SPDT - Single Pole Double Throw) |
| Nominal Coil Voltage | 12V DC |
| Coil Resistance | Approx. 400 Ω (±10%) |
| Coil Power Consumption | Approx. 0.36W (360mW) |
| Nominal Operating Current | Approx. 30mA |
| Max Switching Voltage | 250V AC / 30V DC |
| Max AC Switching Current | 10A at 120V/250V AC |
| Max DC Switching Current | 10A at 28V/30V DC |
| Contact Resistance | ≤ 100 mΩ |
| Operate / Release Time | ≤ 10ms / ≤ 5ms |
| Mechanical Life | ~ 10,000,000 operations |
| Electrical Life | ~ 100,000 operations at full rated load |
| Dimensions | Approx. 19.1mm × 15.5mm × 15.5mm |
150 RPM 12V DC Centre Shaft Geared Motor
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Motor Type | Brushed DC Motor with Metal Spur Gearbox |
| Operating Voltage | 6.0V to 24.0V DC (12V DC Nominal Output) |
| Base Speed (at 12V) | 150 RPM |
| Rated Stall Torque | 1.5 kg-cm to 1.7 kg-cm |
| No-Load / Load Current | 60 mA (Max) / 300 mA (Max) |
| Shaft Dimensions | 6 mm Diameter with internal M3 tapped hole |
| Main Frame Dimensions | 35 mm Gearbox Diameter × 72 mm Overall Body Length |
18650 Lithium-Ion Rechargeable Battery Cell
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Battery Chemistry Type | Lithium-Ion (Li-Ion) Cylindrical Cell |
| Standard Core Sizing | 18650 Baseline (Protected layout extended to ~18675 sizing) |
| Nominal Voltage Rating | 3.6V to 3.7V DC |
| Full Charge Voltage Ceiling | 4.2V DC Max |
| Discharge Cut-off Limit | 2.5V to 3.0V DC (Going below this can permanently kill the cell) |
| Average Capacity Range | 1,200 mAh (Budget) up to 3,500+ mAh (Premium cells) |
| Maximum Discharge Rate | Variable by grade (Typically 1C for storage cells up to 10C+ for power tool cells) |
24V 10A DC Power Supply SMPS
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 110V AC / 220V AC (Selectable via toggle switch, standard 220V configuration for India) |
| Input AC Frequency | 50 Hz / 60 Hz |
| Output DC Voltage | 24V DC Base Rail (Adjustable via +V ADJ) |
| Maximum Output Current | 10.0 Amperes (10,000 mA) Continuous |
| Total Rated Power Capacity | 240 Watts Max Continuous Output |
| Interface Port Type | 7-Pin or 9-Pin Screw Terminal Barrier Block |
| Terminal Designations | L / N (AC Mains), FG / ⏚ (Earth), -V / COM (Ground ×2), +V (24V Output Rail ×2) |
| Form Factor Style | Enclosed Metal Mesh Chassis with mounting arrays |
