Showing 25–36 of 214 results
24V 1A DC Power Adapter
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 100V AC to 240V AC (Standard Indian Single-Phase Mains) |
| Input AC Frequency | 50 Hz / 60 Hz |
| Output DC Voltage | 24V DC Fixed |
| Maximum Output Current | 1.0 Ampere (1000 mA) Continuous |
| Total Rated Power Capacity | 24 Watts Max |
| Connector Dimension Profile | 5.5 mm (Outer Diameter) × 2.1 mm or 2.5 mm (Inner Pin Diameter) |
| Connector Core Polarity | Center-Positive (Inner pin (+), Outer sleeve (-)) |
| Circuit Design Type | Switched-Mode Power Supply (SMPS) |
24V 2A DC Power Adapter
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 100V AC to 240V AC (Standard Indian Single-Phase Mains) |
| Input AC Frequency | 50 Hz / 60 Hz |
| Output DC Voltage | 24V DC Fixed |
| Maximum Output Current | 2.0 Amperes (2000 mA) Continuous |
| Total Rated Power Capacity | 48 Watts Max |
| Connector Dimension Profile | Standard 5.5 mm (Outer Diameter) × 2.1 mm or 2.5 mm (Inner Pin Diameter) |
| Connector Core Polarity | Center-Positive (Inner pin (+), Outer sleeve (-)) |
| Circuit Design Type | Switched-Mode Power Supply (SMPS) |
24V 30A power supply SMPS
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 110V AC / 220V AC (Selectable via toggle switch, standard 220V configuration for India) |
| Input AC Frequency | 50 Hz / 60 Hz |
| Output DC Voltage | 24V DC Base Rail (Adjustable via +V ADJ) |
| Maximum Output Current | 30.0 Amperes (30,000 mA) Continuous |
| Total Rated Power Capacity | 720 Watts Max Continuous Output |
| Interface Port Type | 9-Pin Screw Terminal Barrier Block |
| Terminal Designations | L / N (AC Mains), FG / ⏚ (Earth), -V / COM (Ground ×3), +V (24V Output Rail ×3) |
| Form Factor Style | Enclosed Metal Mesh Chassis with mounting arrays |
24V 3A DC Power Adapter
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 100V AC to 240V AC (Standard Indian Single-Phase Mains) |
| Input AC Frequency | 50 Hz / 60 Hz |
| Output DC Voltage | 24V DC Fixed |
| Maximum Output Current | 3.0 Amperes (3000 mA) Continuous |
| Total Rated Power Capacity | 72 Watts Max |
| Connector Dimension Profile | Standard 5.5 mm (Outer Diameter) × 2.1 mm or 2.5 mm (Inner Pin Diameter) |
| Connector Core Polarity | Center-Positive (Inner pin (+), Outer sleeve (-)) |
| Form Factor Design | Desktop Brick Style (typically requires a 3-pin IEC C13 or C5 AC cord) |
24V 5A DC Power Adapter
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 100V AC to 240V AC (Standard Indian Single-Phase Mains) |
| Input AC Frequency | 50 Hz / 60 Hz |
| Output DC Voltage | 24V DC Fixed |
| Maximum Output Current | 5.0 Amperes (5000 mA) Continuous |
| Total Rated Power Capacity | 120 Watts Max |
| Connector Dimension Profile | Standard 5.5 mm (Outer Diameter) × 2.5 mm or 2.1 mm (Inner Pin) |
| Connector Core Polarity | Center-Positive (Inner pin (+), Outer sleeve (-)) |
| Form Factor Style | Desktop Brick Type (requires a 3-pin IEC C13 power cord) |
24V 5A power supply SMPS
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Input AC Voltage Range | 110V AC / 220V AC (Selectable via toggle or auto-ranging; ensure 220V configuration for India) |
| Output DC Voltage | 24V DC Fixed Base Rail |
| Maximum Output Current | 5.0 Amperes (5000 mA) Continuous |
| Total Rated Power Capacity | 120 Watts Max Continuous Output |
| Interface Outlet Styles | 5.5mm × 2.5mm Barrel Pin (Desktop type) OR Screw Terminal Block (Metal SMPS) |
| Connector Core Polarity | Center-Positive (If utilizing the barrel jack profile) |
| Safety Certifications | Short-Circuit Trip, Over-Current Clamping, and Thermal Overload Protection |
28BYJ-48 5V Unipolar Geared Stepper Motor
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Motor Driving Configuration | 4-Phase, 5-Wire Unipolar Stepper Motor |
| Nominal Operating Voltage | 5.0V DC |
| Internal Mechanical Reduction | 64:1 Gear Ratio |
| Stride Angle / Resolution | 5.625° / 64 |
| DC Coil Resistance (at 25°C) | 50 Ω ± 7% |
| Pull-In / Detent Torque | ≥ 34.3 mN⋅m (approx. 300 to 1,200 gf·cm) |
| Outer Chassis Diameter | 28 mm |
3.5 RPM 12V DC Centre Shaft Geared Motor
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Motor Type | Brushed DC Motor with Metal Spur Gearbox |
| Operating Voltage | 6.0V to 24.0V DC (12V DC Nominal Output) |
| Base Speed (at 12V) | 3.5 RPM |
| Rated Stall Torque | 12 kg-cm to 14 kg-cm (Up to 56 kg-cm maximum stall limit) |
| No-Load / Load Current | 60 mA (Max) / 300 mA (Max) |
| Shaft Dimensions | 6 mm Diameter with internal M3 tapped hole |
| Main Frame Dimensions | 35 mm Gearbox Diameter × 72 mm Overall Body Length |
30 RPM 12V DC Centre Shaft Geared Motor
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Motor Type | Brushed DC Motor with Metal Spur Gearbox |
| Operating Voltage | 6.0V to 24.0V DC (12V DC Nominal Output) |
| Base Speed (at 12V) | 30 RPM |
| Rated Stall Torque | 5 kg-cm to 6 kg-cm |
| No-Load / Load Current | 60 mA (Max) / 300 mA (Max) |
| Shaft Dimensions | 6 mm Diameter with internal M3 tapped hole |
| Main Frame Dimensions | 35 mm Gearbox Diameter × 72 mm Overall Body Length |
300 RPM 12V DC Centre Shaft Geared Motor
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Motor Type | Brushed DC Motor with Metal Spur Gearbox |
| Operating Voltage | 6.0V to 24.0V DC (12V DC Nominal Output) |
| Base Speed (at 12V) | 300 RPM |
| Rated Stall Torque | 1 kg-cm to 1.2 kg-cm |
| No-Load / Load Current | 60 mA (Max) / 300 mA (Max) |
| Shaft Dimensions | 6 mm Diameter with internal M3 tapped hole |
| Main Frame Dimensions | 35 mm Gearbox Diameter × 72 mm Overall Body Length |
37-in-1 Sensor Modules Kit
Technical Specifications
Electrical & Mechanical Parameters
- Supply Voltage (\(V_{CC}\)): Dual-compatible 3.3V DC to 5.0V DC (safely matches both low-power ARM architecture and standard 5V AVR logic).
- Signal Output Formats: Analog Voltage (\(0\text{V} - V_{CC}\)), Digital High/Low (\(V_{CC}/\text{GND}\)), and Serial Bus streams.
- Pin Configuration: Industry-standard 3-Pin or 4-Pin layouts with clear PCB silk-screen markings (
Sfor Signal,+orVCCfor Power,-orGNDfor Ground). - Header Type: Pre-soldered straight male headers, 2.54mm (0.1") pitch.
- Mounting Ease: Selected complex modules include pre-drilled M2/M3 screw holes for permanent chassis or enclosure installation.
40-Pin Female-to-Female 20cm Jumper Wire
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Connector Configuration | Female to Female (Socket Receptacle to Socket Receptacle) |
| Total Wire Count | 40 individual interconnected strands |
| Physical Cable Length | 20 cm (Approx. 8 Inches) |
| Terminal Connector Pitch | Standard 2.54 mm (100 mil spacing format) |
| Conductor Insulation | Highly flexible, durable PVC jacket coating |
| Terminal Contacts | Nickel-plated brass internal contact leaves |
| Hardware Compatibility | Arduino, ESP32, Raspberry Pi, sensor breakouts, and driver boards |
