Name: 12V 7Ah Sealed Lead-Acid Rechargeable Battery
SKU: VE-148
Availability: InStock

12V 7Ah Sealed Lead-Acid Rechargeable Battery

Technical Specifications

Characteristic	Specification Parameters
Battery Chemistry Core	Sealed Lead Acid (SLA) / AGM VRLA Technology
Nominal System Voltage	12.0V DC
Rated Storage Capacity	7.0 Ah at a standard 20-hour discharge rate
Standby Float Charge Range	13.5V to 13.8V DC at 25°C (Recommended for UPS/Standby)
Cyclic Charging Window	14.4V to 15.0V DC Max (Recommended for Solar/Cyclic)
Maximum Charging Current	2.1A (Exceeding this ceiling causes thermal swelling and gas build-up)
Terminal Connector Block	Standard F2 Faston Tabs (6.35 mm width) or F1 Tabs (4.75 mm width)
Chassis Main Dimensions	Approx. 151 mm × 65 mm × 94 mm (Standard Universal Blocks)
Average Operational Weight	Approx. 2.0 kg to 2.2 kg (Heavy internal lead grid density)

The 12V 7Ah Sealed Lead-Acid (SLA) Rechargeable Battery is a high-capacity, valve-regulated lead-acid (VRLA) power cube designed for reliable backup power and heavy cyclic systems. Utilizing advanced Absorbent Glass Mat (AGM) technology, the internal acid electrolyte is fully suspended in ultra-fine fiberglass separators, making the unit completely spill-proof, leak-free, and maintenance-free with no water top-ups required. It is the gold standard baseline energy storage block across India for desktop UPS systems, home inverter modules, solar street lights, automated gate systems, and electronic sprayer pumps.

✨ Key Features

Spill-Proof VRLA Construction: Features a rugged, heavy-duty ABS plastic case that allows the battery to operate safely in any physical layout or orientation without leaking acid.
Gas Recombination Engine: Incorporates an internal plate matrix that automatically recombines hydrogen and oxygen gases generated during charging, eliminating outgassing risks under normal conditions.
Excellent Deep-Discharge Recovery: Heavy-duty lead-calcium grids ensure long storage life and high structural integrity, allowing the battery to bounce back reliably after extended power blackouts.
Standard F1/F2 Faston Terminals: Outfitted with heavy flat spade terminals (typically Type F2 or F1) for immediate, high-conductivity slide-on wire connector hookups

-15%

12v-7.5ah-rechargeable-lead-acid-battery-400x400

Click to enlarge

Back to products

Original price was: ₹820.00.Current price is: ₹700.00.

Characteristic	Specification Parameters
Battery Chemistry Core	Sealed Lead Acid (SLA) / AGM VRLA Technology
Nominal System Voltage	12.0V DC
Rated Storage Capacity	7.0 Ah at a standard 20-hour discharge rate
Standby Float Charge Range	13.5V to 13.8V DC at 25°C (Recommended for UPS/Standby)
Cyclic Charging Window	14.4V to 15.0V DC Max (Recommended for Solar/Cyclic)
Maximum Charging Current	2.1A (Exceeding this ceiling causes thermal swelling and gas build-up)
Terminal Connector Block	Standard F2 Faston Tabs (6.35 mm width) or F1 Tabs (4.75 mm width)
Chassis Main Dimensions	Approx. 151 mm × 65 mm × 94 mm (Standard Universal Blocks)
Average Operational Weight	Approx. 2.0 kg to 2.2 kg (Heavy internal lead grid density)

Compare

Add to wishlist

SKU: VE-148 Category: Batteries, Accessories

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “12V 7Ah Sealed Lead-Acid Rechargeable Battery”

Shipping & Delivery

Related products

12V Lithium-Ion Battery Pack with DC Barrel Jack

Batteries, Accessories

Characteristic	Specification Parameters
Internal Cell Assembly	Lithium-Ion 18650 Format in a 3S arrangement (3 Series)
Nominal System Voltage	11.1V DC to 12.0V DC
Full Charge Peak Ceiling	12.6V DC Max Voltage Profile
Discharge Cut-Off Safety	~9.0V DC BMS Threshold Limit
Popular Capacity Offerings	Ranges of 2000mAh
Interface Port Connector	5.5 mm × 2.1 mm DC Barrel Plug (Center-Positive configuration)
Continuous Discharge Limit	~2A to 5A Continuous Output Current (BMS variant dependent)

Add to cart

Quick view

-20%

Duracell Alkaline AA 1.5V Battery

The Duracell Alkaline AA 1.5V Battery (commonly searched for via typo as "AA batery durecell") is a high-performance, single-use cylindrical power cell engineered to drive both high-drain electronics and everyday household gadgets. Utilizing premium Alkaline-Manganese Dioxide chemistry, it provides up to 10 times longer lasting power compared to standard zinc-carbon batteries. Recognizable by its iconic "Copper Top" black and bronze design, it serves as the premium power solution across India for digital cameras, motorized toys, game controllers, and flashlights. [1, 2, 3, 4, 5]

Duralock Power Preserve Technology: Formulated to lock in chemical energy, guaranteeing a shelf life of up to 10 years in proper storage conditions.
Superior Leakage Prevention: Built with a robust mechanical top closure and specialized anti-corrosion steel casing to prevent dangerous runtime leaks.
High-Drain Optimisation: Capable of supplying consistent voltage without dropping under sudden high-current load pulses.
Wide Thermal Tolerance: Specially designed to operate smoothly across a wide temperature spectrum, maintaining efficiency in extreme environments.

-43%

CR1220 Lithium Manganese Dioxide Coin Cell Battery

Characteristic	Specification Parameters
Battery Chemistry Core	Lithium Manganese Dioxide (LiMnO2) Primary Cell
IEC Standard Designation	CR1220 (Cross-references with DL1220, ECR1220, BR1220)
Nominal Voltage Output	3.0V DC
Average Charge Capacity	35 mAh to 40 mAh
Standard Continuous Drain	0.1 mA
Cell Structural Diameter	12.5 mm
Cell Structural Thickness	2.0 mm
Average Component Weight	Approx. 0.8 grams to 1.0 gram

Raspberry Pi 5 Case with Integrated Temperature-Controlled Fan

Technical Specification Details

Parameter	Specification Details
Enclosure Materials	Structural Grade ABS (Base, Frame, Lid) + Polycarbonate (Fan Assembly)
Input Supply Voltage	5V DC (Supplied through the 4-pin fan header)
Fan Speed Protocol	Pulse Width Modulation (PWM) with tachometer loopback feedback
Maximum Airflow	2.79 Cubic Feet per Minute (CFM)
Maximum Fan Speed	8000 RPM (±15%)
Expansion Cutouts	Exposes fan airflow path, composite cable breakout, and GPIO slots
Physical Proportions	Standard 70.3 mm × 98.5 mm × 33.0 mm profile

Raspberry Pi Zero Case

Parameter	Specification Details
Board Compatibility	Raspberry Pi Zero \| Raspberry Pi Zero W \| Raspberry Pi Zero 2 W
Material Construction	Impact-resistant, high-durability ABS Plastic
Lid Configuration 1	Solid plain cover for complete dust-proof protection
Lid Configuration 2	Camera mount cover with custom slot to embed a camera module flush
Lid Configuration 3	GPIO breakout cover exposing the full 40-pin array for prototyping
Assembly Profile	Interlocking snap-fit frame alignment matrix
Physical Dimensions	78.8 mm × 37.0 mm × 15.5 mm
Product Weight	~28 Grams (unloaded)

-21%

Eveready AA 1.5V Everyday Dry Cell Battery

Characteristic	Specification Parameters
Battery Chemistry Type	Carbon-Zinc / Zinc-Manganese Dioxide (Zn/MnO₂)
Global Sizing Designations	AA Size / R6 / ANSI-15D / 1015 Series
Nominal Voltage Output	1.5V DC Baseline
Average Operational Capacity	~1,100 mAh down to a 0.8V cut-off threshold
Typical Shelf Life Sizing	2 to 3 Years from manufacturing date (Variant dependent)
Standard Battery Jacket	Rigid protective metal casing sleeve
Average Unit Component Weight	Approx. 15.0 grams per cell

-33%

Hi-Watt (HW) 9V Non-Rechargeable Battery

Characteristic	Specification Parameters
Battery Chemical Profile	Primary Zinc-Carbon (Non-Rechargeable dry cell)
Industry Standard Sizing	PP3 Framework / 6F22 Configuration
Nominal Output Voltage	9.0V DC
Average Charge Capacity	~500 mAh to 600 mAh under intermittent test conditions
Discharge Resistance Sizing	620 Ω internal static resistance path
Continuous Discharge life	~9 Hours under reference diagnostic loads
Discharge Cut-Off Ceiling	5.4V DC Lower functional boundary
Operational Heat Window	-20°C up to +85°C Operating Limit
Module Base Dimensions	Approx. 48.5 mm × 26.5 mm × 17.5 mm

Raspberry Pi 4 Protective Case

Parameter	Specification Details
Compatibility	Designed exclusively for Raspberry Pi 4 Model B (1GB, 2GB, 4GB, and 8GB variants)
Material Construction	High-durability, impact-resistant ABS Plastic
Access Openings	Power, Dual Display, Audio, Dual Camera/Display FPC slots, MicroSD slot, Activity LEDs
Assembly Style	3-Piece Snap-fit interlocking matrix
Ventilation Profile	Passive internal air cavity layout (Sufficient clearance for low-profile heatsinks)
Physical Dimensions	97.0 mm × 70.0 mm × 25.0 mm
Product Weight	~46 Grams (unloaded)