Name: KY-040 Rotary Encoder Module
SKU: VE-061
Price: 70.00 INR
Availability: InStock

KY-040 Rotary Encoder Module

Technical Specification Details

Parameter	Specification Details
Operating Input Voltage	3.3V to 5.0V DC (Logic-level matched to your host microcontroller)
Pulses Per Revolution	20 PPR (20 full digital steps per 360° cycle)
Output Data Type	2-Channel Quadrature Digital Output (CLK, DT) \| 1-Channel Push Switch (SW)
Switch Operation Style	Momentary Tactile (Outputs LOW when pressed down, HIGH when at rest)
Onboard Pull-up Array	Dual 10kΩ resistors pre-soldered on data channels
Shaft Profile Construction	High-durability D-shape metal shaft (6mm diameter)
Physical Proportions	32.0 mm × 19.0 mm × 30.0 mm

SKU: VE-061 Category: Sensors

Short Description

Bring precise, digital navigation control to your electronics projects with the KY-040 Rotary Encoder Module. Unlike standard analog potentiometers that have a fixed physical stopping point, this incremental digital encoder can rotate 360 degrees continuously in either direction. It operates by generating quadrature digital pulses that track exactly how much the knob has turned and in which direction (clockwise or counter-clockwise). It also features an integrated momentary push-button switch under the shaft, making it the perfect choice for navigating graphical display menus, adjusting volume levels, controlling stepper motors, and fine-tuning smart home dashboards.

Key Product Features

360-Degree Continuous Rotation: Rotates infinitely in both directions without any physical limits, preventing mechanical strain or damage from over-turning.
Tactile Detent Feedback: Engineered with satisfying internal indexing clicks (detents) that provide crisp tactile feedback to the user on every step.
Integrated Push-Button Switch: Features a hidden digital tactile switch under the metal shaft that registers an active-low signal when the knob is pressed straight down.
Onboard Pull-Up Resistors: Outfitted with 10kΩ internal pull-up resistors for the CLK (Clock) and DT (Data) pins, saving you breadboard space and reducing extra wiring steps.
Universal System Voltage: Natively supports power inputs from 3.3V to 5.0V DC, allowing it to interface directly with an Arduino, ESP32, Raspberry Pi, or STM32

-15%

Click to enlarge

Back to products

Original price was: ₹82.00.Current price is: ₹70.00.

Parameter	Specification Details
Operating Input Voltage	3.3V to 5.0V DC (Logic-level matched to your host microcontroller)
Pulses Per Revolution	20 PPR (20 full digital steps per 360° cycle)
Output Data Type	2-Channel Quadrature Digital Output (CLK, DT) \| 1-Channel Push Switch (SW)
Switch Operation Style	Momentary Tactile (Outputs LOW when pressed down, HIGH when at rest)
Onboard Pull-up Array	Dual 10kΩ resistors pre-soldered on data channels
Shaft Profile Construction	High-durability D-shape metal shaft (6mm diameter)
Physical Proportions	32.0 mm × 19.0 mm × 30.0 mm

Compare

Add to wishlist

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “KY-040 Rotary Encoder Module”

Shipping & Delivery

Related products

-35%

ACS712 Current Sensor Module – 30A

Sensors

Parameter	Specification Details
Primary Sensor IC	Allegro MicroSystems ACS712
Sensing Engine Mechanism	Linear Hall-Effect Sensor Array
Operating Input Supply	5.0V DC Single Supply (Power LED Indicator Onboard)
Conductor Path Resistance	Low 1.2 mΩ internal resistance path
Output Type Profile	Ratiometric Analog Voltage (0.5V to 4.5V output window)
Zero Current Bias Point	VCC / 2 (Approximately 2.5V DC)
Module Sensitivities	30A Variant: 66 mV/A
Total System Accuracy	1.5% Error Index threshold calibration at room temperature
Physical Dimensions	31.0 mm × 13.0 mm × 13.5 mm low profile

Add to cart

Quick view

-14%

RC522- RFID Smart Card

Parameter	Specification Details
Operating Frequency	13.56 MHz High-Frequency (HF)
Chip Architecture Core	MIFARE Classic 1K Compatible (S50)
Memory Capacity	1024 Bytes (1 KB) EEPROM
Storage Structure Layout	16 Sectors (Each sector contains 4 Blocks; 1 Block holds 16 Bytes)
Unique Identification Number	4-Byte Non-Changeable Unique ID (UID)
Communication Protocol	ISO / IEC 14443 Type A Standard
Typical Data Retention	Engineered to hold written data securely for over 10 Years
Sensing Distance Threshold	2 cm to 10 cm (Subject to your reader antenna power profile)
Physical Proportions	85.6 mm × 54.0 mm × 0.8 mm (Standard CR80 Credit Card Size)

-18%

Raindrop Detection Sensor Module

Technical Specifications

Characteristic	Specification Parameters
Sensor Principle	Resistance-Based Variable Conductivity
Operating Voltage	3.3V to 5.0V DC
Operating Current	~15 mA to 20 mA (Low consumption)
Comparator IC	LM393 Wide-Voltage Operational Amplifier
Sensing Pad Area	Approx. 40 mm × 50 mm (Double-sided FR4 layer)
Output Formats	Digital TTL (0 / 1) and Analog Voltage (AO)

-16%

RC522 RFID Card Reader Module Kit

Parameter	Specification Details
Primary Chipset Silicon	NXP Semiconductors MFRC522
Radio Frequency Band	13.56 MHz ISM Proximity Band
Operating Logic Voltage	3.3V DC (Pins are 5V tolerant for signal inputs)
Current Draw Profile	13–26mA (Active read) \| 10–13mA (Idle) \| <80µA (Sleep mode)
Maximum Data Rate	Up to 10 Mbps over the SPI interface protocol
Effective Sensing Range	≥ 50 mm (Subject to tag antenna geometry configurations)
Supported Card Arrays	MIFARE 1 S50 \| MIFARE 1 S70 \| MIFARE Ultralight \| MIFARE Pro
System Interface Bus	Serial Peripheral Interface (SPI) default mode
Physical Proportions	40.0 mm × 60.0 mm compact footprint card layout

HC-SR501 PIR Motion Sensor Module

Parameter	Specification Details
Sensing IC Hardware Core	BISS0001 Micro Power PIR Motion Detector IC
Operating Voltage Range	4.5V to 20V DC
Quiescent Power Standby	Under 60 µA peak drain
Data Signal Output Level	High: 3.3V TTL \| Low: 0V
Delay Tuning Range	5 Seconds to 300 Seconds (Adjustable)
Blockade Blind Spot Duration	2.5 Seconds default (Prevents repetitive false triggers)
Detection Coverage Distance	3 Meters to 7 Meters maximum (Potentiometer variable)
Operating Temperatures	-15°C to +70°C
Physical Proportions	32 mm × 24 mm × 18 mm

-23%

37-in-1 Sensor Modules Kit

Electrical & Mechanical Parameters

Supply Voltage (\(V_{CC}\)): Dual-compatible 3.3V DC to 5.0V DC (safely matches both low-power ARM architecture and standard 5V AVR logic).
Signal Output Formats: Analog Voltage (\(0\text{V} - V_{CC}\)), Digital High/Low (\(V_{CC}/\text{GND}\)), and Serial Bus streams.
Pin Configuration: Industry-standard 3-Pin or 4-Pin layouts with clear PCB silk-screen markings (S for Signal, + or VCC for Power, - or GND for Ground).
Header Type: Pre-soldered straight male headers, 2.54mm (0.1") pitch.
Mounting Ease: Selected complex modules include pre-drilled M2/M3 screw holes for permanent chassis or enclosure installation.

ACS712 Current Sensor Module – 5A

Parameter	Specification Details
Primary Sensor IC	Allegro MicroSystems ACS712
Sensing Engine Mechanism	Linear Hall-Effect Sensor Array
Operating Input Supply	5.0V DC Single Supply (Power LED Indicator Onboard)
Conductor Path Resistance	Low 1.2 mΩ internal resistance path
Output Type Profile	Ratiometric Analog Voltage (0.5V to 4.5V output window)
Zero Current Bias Point	VCC / 2 (Approximately 2.5V DC)
Module Sensitivities	5A Variant: 185 mV/A
Total System Accuracy	1.5% Error Index threshold calibration at room temperature
Physical Dimensions	31.0 mm × 13.0 mm × 13.5 mm low profile

HC-SR04 Ultrasonic Sensor Module

Parameter	Specification Details
Operating Voltage Range	3.0V to 5.5V DC (Highly versatile input range)
Quiescent Current Draw	Under 3mA during active operation
Acoustic Burst Frequency	40 kHz Ultrasonic wave pattern
Measurement Coverage Range	2 cm to 400 cm (4 meters)
Effective Detection Angle	15-Degree measurement cone aperture
Input Trigger Pulse	Needs a minimum 10-microsecond High TTL signal to fire sonar
Output Echo Pulse	TTL level matched directly to your VCC input supply voltage
Physical Board Proportions	45 mm × 20 mm × 15 mm