Name: Dual-Axis PS2 Joystick Breakout Module
SKU: VE-058
Price: 70.00 INR
Availability: InStock

Dual-Axis PS2 Joystick Breakout Module

Technical Specification Details

Parameter	Specification Details
Operating Input Supply	3.3V to 5.0V DC (Logic-level matched to host microcontroller)
Potentiometer Resistance	Dual 10kΩ linear potentiometers (X and Y axes)
Output Type Profile	2 × Analog Voltage Outputs (VRx, VRy) \| 1 × Digital TTL Output (SW)
Center Bias Point	Outputs approximately VCC / 2 when at rest in the center position
Switch Operation Style	Momentary tactile switch (Needs a pull-up resistor, outputs LOW when pressed)
Operational Lifespan	Rated for more than 1,000,000 cycles of structural deflection
Physical Proportions	40.0 mm × 26.0 mm × 32.0 mm

SKU: VE-058 Category: Sensors

Bring fluid, multi-directional control to your hardware projects with the Dual-Axis PS2 Joystick Breakout Module. Modeled directly after the classic PlayStation 2 controller thumbsticks, this module combines two independent 10kΩ potentiometers to capture precise X and Y coordinates. It also features a hidden push-down tactile switch that registers digital inputs along the Z-axis. It is the premier choice for steering robotic arms, managing motorized pan-tilt camera brackets, playing retro arcade emulators, and navigating complex graphical menu interfaces.

Key Product Features

True Analog Positioning: Generates highly sensitive, proportional analog voltage values based on how far the user pushes the thumbstick in any direction.
Hidden Digital Push Button: Features an integrated momentary tactile switch under the thumb cap that triggers an active low output when pressed down.
Ergonomic Rubber Thumb Cap: Includes a removable, non-slip textured rubber thumb grip that fits comfortably on the thumb for smooth, non-fatiguing operation.
Simple 5-Pin Interface: Pin out is broken out clearly onto standard male headers (GND, +5V, VRx, VRy, SW) for fast breadboard or jumper cable wiring.
Auto-Centering Spring Mechanism: Equipped with high-durability internal tension springs that snap the joystick back to its neutral center coordinate instantly upon release.

-15%

Click to enlarge

Back to products

Original price was: ₹82.00.Current price is: ₹70.00.

Parameter	Specification Details
Operating Input Supply	3.3V to 5.0V DC (Logic-level matched to host microcontroller)
Potentiometer Resistance	Dual 10kΩ linear potentiometers (X and Y axes)
Output Type Profile	2 × Analog Voltage Outputs (VRx, VRy) \| 1 × Digital TTL Output (SW)
Center Bias Point	Outputs approximately VCC / 2 when at rest in the center position
Switch Operation Style	Momentary tactile switch (Needs a pull-up resistor, outputs LOW when pressed)
Operational Lifespan	Rated for more than 1,000,000 cycles of structural deflection
Physical Proportions	40.0 mm × 26.0 mm × 32.0 mm

Compare

Add to wishlist

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Dual-Axis PS2 Joystick Breakout Module”

Shipping & Delivery

Related products

-13%

TTP223 Capacitive Touch Sensor Module

Sensors

Parameter	Specification Details
Sensing IC Chipset	TTP223-BA6 TonTouch Capacitive Detector
Operating Voltage Range	2.0V to 5.5V DC
Response Time Max	~60ms at fast mode \| ~220ms at low-power standby mode
Output Logic Mode	Default: Momentary Active-High (Configurable via solder pads)
Current Consumption	Ultra-low 1.5 µA to 3.0 µA baseline power draw
Default Jumper State A	Open: Active-High Output \| Shorted: Active-Low Output
Default Jumper State B	Open: Momentary Switch \| Shorted: Self-Locking / Latching Toggle
Physical Dimensions	15.0 mm × 11.0 mm micro-footprint layout profile

Add to cart

Quick view

ACS712 Current Sensor Module – 10A

Parameter	Specification Details
Primary Sensor IC	Allegro MicroSystems ACS712
Sensing Engine Mechanism	Linear Hall-Effect Sensor Array
Operating Input Supply	5.0V DC Single Supply (Power LED Indicator Onboard)
Conductor Path Resistance	Low 1.2 mΩ internal resistance path
Output Type Profile	Ratiometric Analog Voltage (0.5V to 4.5V output window)
Zero Current Bias Point	VCC / 2 (Approximately 2.5V DC)
Module Sensitivities	10A Variant: 195 mV/A
Total System Accuracy	1.5% Error Index threshold calibration at room temperature
Physical Dimensions	31.0 mm × 13.0 mm × 13.5 mm low profile

ACS712 Current Sensor Module – 5A

Parameter	Specification Details
Primary Sensor IC	Allegro MicroSystems ACS712
Sensing Engine Mechanism	Linear Hall-Effect Sensor Array
Operating Input Supply	5.0V DC Single Supply (Power LED Indicator Onboard)
Conductor Path Resistance	Low 1.2 mΩ internal resistance path
Output Type Profile	Ratiometric Analog Voltage (0.5V to 4.5V output window)
Zero Current Bias Point	VCC / 2 (Approximately 2.5V DC)
Module Sensitivities	5A Variant: 185 mV/A
Total System Accuracy	1.5% Error Index threshold calibration at room temperature
Physical Dimensions	31.0 mm × 13.0 mm × 13.5 mm low profile

-14%

RFID Adhesive Tag

Parameter	Specification Details
Operating Frequency	13.56 MHz High-Frequency (HF)
Chip Architecture Core	MIFARE Classic 1K Compatible (S50)
Memory Capacity	1024 Bytes (1 KB) EEPROM
Storage Structure Layout	16 Sectors (Each sector contains 4 Blocks; 1 Block holds 16 Bytes)
Unique Identification Number	4-Byte Non-Changeable Unique ID (UID)
Communication Protocol	ISO / IEC 14443 Type A Standard
Adhesive Backing Type	Authentic 3M Heavy-Duty Double-Sided Tissue Tape or equivalent
Sensing Distance Threshold	1 cm to 4 cm (Subject to your reader antenna power profile)
Material Base Finish	Water-Resistant White PVC Coin Disc Profile
Physical Proportions	25.0 mm Diameter × 1.0 mm Thickness

HC-SR501 PIR Motion Sensor Module

Parameter	Specification Details
Sensing IC Hardware Core	BISS0001 Micro Power PIR Motion Detector IC
Operating Voltage Range	4.5V to 20V DC
Quiescent Power Standby	Under 60 µA peak drain
Data Signal Output Level	High: 3.3V TTL \| Low: 0V
Delay Tuning Range	5 Seconds to 300 Seconds (Adjustable)
Blockade Blind Spot Duration	2.5 Seconds default (Prevents repetitive false triggers)
Detection Coverage Distance	3 Meters to 7 Meters maximum (Potentiometer variable)
Operating Temperatures	-15°C to +70°C
Physical Proportions	32 mm × 24 mm × 18 mm

-18%

Raindrop Detection Sensor Module

Technical Specifications

Characteristic	Specification Parameters
Sensor Principle	Resistance-Based Variable Conductivity
Operating Voltage	3.3V to 5.0V DC
Operating Current	~15 mA to 20 mA (Low consumption)
Comparator IC	LM393 Wide-Voltage Operational Amplifier
Sensing Pad Area	Approx. 40 mm × 50 mm (Double-sided FR4 layer)
Output Formats	Digital TTL (0 / 1) and Analog Voltage (AO)

-23%

37-in-1 Sensor Modules Kit

Electrical & Mechanical Parameters

Supply Voltage (\(V_{CC}\)): Dual-compatible 3.3V DC to 5.0V DC (safely matches both low-power ARM architecture and standard 5V AVR logic).
Signal Output Formats: Analog Voltage (\(0\text{V} - V_{CC}\)), Digital High/Low (\(V_{CC}/\text{GND}\)), and Serial Bus streams.
Pin Configuration: Industry-standard 3-Pin or 4-Pin layouts with clear PCB silk-screen markings (S for Signal, + or VCC for Power, - or GND for Ground).
Header Type: Pre-soldered straight male headers, 2.54mm (0.1") pitch.
Mounting Ease: Selected complex modules include pre-drilled M2/M3 screw holes for permanent chassis or enclosure installation.

HC-SR04 Ultrasonic Sensor Module

Parameter	Specification Details
Operating Voltage Range	3.0V to 5.5V DC (Highly versatile input range)
Quiescent Current Draw	Under 3mA during active operation
Acoustic Burst Frequency	40 kHz Ultrasonic wave pattern
Measurement Coverage Range	2 cm to 400 cm (4 meters)
Effective Detection Angle	15-Degree measurement cone aperture
Input Trigger Pulse	Needs a minimum 10-microsecond High TTL signal to fire sonar
Output Echo Pulse	TTL level matched directly to your VCC input supply voltage
Physical Board Proportions	45 mm × 20 mm × 15 mm