Name: Dual Shaft BO Motor - (Battery Operated Geared DC Motor)
SKU: VE-093
Availability: InStock

Dual Shaft BO Motor – (Battery Operated Geared DC Motor)

85012000

Technical Specifications

Characteristic	Specification Parameters
Motor & Gearbox Type	Permanent-Magnet Brushed DC Motor with Plastic Spur Gears
Operating Voltage Range	3.0V to 9.0V DC (6V DC Nominal Standard)
Common Rated Speeds	60 / 100 / 150 / 200 / 300 RPM (Depending on Voltage)
Current Draw Profile	~60mA No-Load Current / ~700mA at full mechanical stall
Output Torque (approx.)	~0.35 kg-cm up to 1.9 kg-cm (Ratio-dependent scaling)
Shaft Profile & Shape	Slotted Flat-Sided Dual Output Axles (5.5 mm to 6 mm Diameter)
Casing Dimensions	55 mm × 48 mm × 23 mm

SKU: VE-093 Category: Motors

The Dual Shaft BO Motor (Battery Operated) is a lightweight, budget-friendly DC motor combined with a built-in plastic reduction gearbox. Known as a “straight” or “in-line” motor, it features an output axle projecting out of both sides of the casing. This distinct dual-shaft engineering allows you to mount a drive wheel on one side while attaching a digital speed encoder or position-tracking disc on the other. It is the benchmark choice for basic STEM education, autonomous line-following cars, and obstacle-avoidance robot chassis.

✨ Key Features

Double-Sided Output Axis: Dual pins enable simultaneous wheel mounting and rotational speed tracking via infrared optical encoders.
Low-Voltage Efficiency: Engineered to produce high-torque translation at minimal operating voltages, extending battery runtime.
Impact-Absorbing Housing: The injection-molded plastic gear layout acts as an elastic cushion, absorbing structural shock waves and ground vibrations.
Featherweight Form Factor: Minimizes total vehicle bulk and chassis drag, enhancing the agility and runtime of small autonomous cars.

-23%

Click to enlarge

Back to products

Original price was: ₹65.00.Current price is: ₹50.00.85012000

Characteristic	Specification Parameters
Motor & Gearbox Type	Permanent-Magnet Brushed DC Motor with Plastic Spur Gears
Operating Voltage Range	3.0V to 9.0V DC (6V DC Nominal Standard)
Common Rated Speeds	60 / 100 / 150 / 200 / 300 RPM (Depending on Voltage)
Current Draw Profile	~60mA No-Load Current / ~700mA at full mechanical stall
Output Torque (approx.)	~0.35 kg-cm up to 1.9 kg-cm (Ratio-dependent scaling)
Shaft Profile & Shape	Slotted Flat-Sided Dual Output Axles (5.5 mm to 6 mm Diameter)
Casing Dimensions	55 mm × 48 mm × 23 mm

Compare

Add to wishlist

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Dual Shaft BO Motor – (Battery Operated Geared DC Motor)”

Shipping & Delivery

Related products

-15%

1000 RPM 12V DC Centre Shaft Geared Motor

Motors

Characteristic	Specification Parameters
Motor Type	Brushed DC Motor with Metal Spur Gearbox
Operating Voltage	6.0V to 24.0V DC (12V DC Nominal Output)
Base Speed (at 12V)	1000 RPM
Rated Stall Torque	0.2 kg-cm to 0.3 kg-cm
No-Load / Load Current	60 mA (Max) / 300 mA (Max)
Shaft Dimensions	6 mm Diameter with internal M3 tapped hole
Main Frame Dimensions	35 mm Gearbox Diameter × 72 mm Overall Body Length

Add to cart

Quick view

-17%

RS-775 Heavy-Duty High-Speed DC Motor

Characteristic	Specification Parameters
Motor Classification	RS-775 High-Power Brushed Carbon DC Motor
Operating Voltage Range	12.0V to 24.0V DC (12V/24V Dual-Nominal Support)
No-Load Angular Speed	~10,000 RPM (at 12V) to ~20,000 RPM (at 24V)
Current Limits (at 12V)	~1.2A No-Load / 5A Rated Peak / Up to 20A+ full stall surge
Output Shaft Dimensions	5.0 mm Diameter × 16 mm Length (Round Shaft)
Mounting Blueprint	2 × M4 Bolt Holes spaced 29 mm apart on faceplate
Main Body Dimensions	42 mm Housing Diameter × 67 mm Frame Length

300 RPM 12V DC Centre Shaft Geared Motor

Characteristic	Specification Parameters
Motor Type	Brushed DC Motor with Metal Spur Gearbox
Operating Voltage	6.0V to 24.0V DC (12V DC Nominal Output)
Base Speed (at 12V)	300 RPM
Rated Stall Torque	1 kg-cm to 1.2 kg-cm
No-Load / Load Current	60 mA (Max) / 300 mA (Max)
Shaft Dimensions	6 mm Diameter with internal M3 tapped hole
Main Frame Dimensions	35 mm Gearbox Diameter × 72 mm Overall Body Length

-8%

NEMA 17 Bipolar Hybrid Stepper Motor

Characteristic	Specification Parameters
Motor Category & Phase	2-Phase Bipolar Hybrid Stepper Motor
Step Resolution Angle	1.8° per step (200 Steps/Revolution)
Nominal Operating Voltages	12V to 24V DC (Dynamic Driving Range via Chopper)
Rated Operating Current	1.5A to 1.7A per internal coil phase
Holding Torque Profile	~40 N-cm up to 59 N-cm (Depending on body length configuration)
Output Shaft Geometry	5.0 mm Flat D-Cut Spindle (Prevents mechanical pulley slipping)
Chassis Main Frame Footprint	42 mm × 42 mm × 40 mm (Standard Length Frame)

Johnson High-Torque Side Shaft DC Geared Motor – 500 RPM

Characteristic	Specification Parameters
Motor & Gearbox Type	Heavy-Duty Brushed DC Motor with Side Shaft Spur Gearhead
Operating Voltage Range	6.0V to 18.0V DC (12V Nominal Power)
Available Output Speeds	500
Current Limits (at 12V)	~800 mA No-Load Current / Up to 7.5A Maximum Load Current
Output Shaft Style	Off-Centered 6 mm Diameter Shaft with an internal M3 threaded hole
Gearbox Dimensions	37 mm Outer Diameter

Single Shaft BO Motor – (Battery Operated Geared DC Motor)

Characteristic	Specification Parameters
Motor & Gearbox Type	Permanent-Magnet Brushed DC Motor with Plastic Spur Gears
Operating Voltage Range	3.0V to 9.0V DC (6V DC Nominal Standard)
Common Rated Speeds	60 / 100 / 150 / 200 / 300 RPM (Depending on Voltage)
Current Draw Profile	~60mA No-Load Current / ~700mA at full mechanical stall
Output Torque (approx.)	~0.35 kg-cm up to 1.9 kg-cm (Ratio-dependent scaling)
Shaft Profile & Shape	Slotted Flat-Sided Dual Output Axles (5.5 mm to 6 mm Diameter)
Casing Dimensions	55 mm × 48 mm × 23 mm

30 RPM 12V DC Centre Shaft Geared Motor

Characteristic	Specification Parameters
Motor Type	Brushed DC Motor with Metal Spur Gearbox
Operating Voltage	6.0V to 24.0V DC (12V DC Nominal Output)
Base Speed (at 12V)	30 RPM
Rated Stall Torque	5 kg-cm to 6 kg-cm
No-Load / Load Current	60 mA (Max) / 300 mA (Max)
Shaft Dimensions	6 mm Diameter with internal M3 tapped hole
Main Frame Dimensions	35 mm Gearbox Diameter × 72 mm Overall Body Length

10 RPM 12V DC Centre Shaft Geared Motor

Characteristic	Specification Parameters
Motor Type	Brushed DC Motor with Metal Spur Gearbox
Operating Voltage	6.0V to 24.0V DC (12V DC Nominal Output)
Base Speed (at 12V)	10 RPM
Rated Stall Torque	7 kg-cm to 8 kg-cm
No-Load / Load Current	60 mA (Max) / 300 mA (Max)
Shaft Dimensions	6 mm Diameter with internal M3 tapped hole
Main Frame Dimensions	35 mm Gearbox Diameter × 72 mm Overall Body Length