Name: Single Shaft BO Motor - (Battery Operated Geared DC Motor)
SKU: VE-094
Price: 50.00 INR
Availability: InStock

Single Shaft BO Motor – (Battery Operated Geared DC Motor)

Technical Specifications

Characteristic	Specification Parameters
Motor & Gearbox Type	Permanent-Magnet Brushed DC Motor with Plastic Spur Gears
Operating Voltage Range	3.0V to 9.0V DC (6V DC Nominal Standard)
Common Rated Speeds	60 / 100 / 150 / 200 / 300 RPM (Depending on Voltage)
Current Draw Profile	~60mA No-Load Current / ~700mA at full mechanical stall
Output Torque (approx.)	~0.35 kg-cm up to 1.9 kg-cm (Ratio-dependent scaling)
Shaft Profile & Shape	Slotted Flat-Sided Dual Output Axles (5.5 mm to 6 mm Diameter)
Casing Dimensions	55 mm × 48 mm × 23 mm

SKU: VE-094 Category: Motors

The Single Shaft BO Motor (Battery Operated) is a lightweight, budget-friendly DC motor combined with a built-in plastic reduction gearbox. Known as a “straight” or “in-line” motor, it features an output axle projecting out of both sides of the casing. This distinct dual-shaft engineering allows you to mount a drive wheel on one side while attaching a digital speed encoder or position-tracking disc on the other. It is the benchmark choice for basic STEM education, autonomous line-following cars, and obstacle-avoidance robot chassis.

✨ Key Features

Low-Voltage Efficiency: Engineered to produce high-torque translation at minimal operating voltages, extending battery runtime.
Impact-Absorbing Housing: The injection-molded plastic gear layout acts as an elastic cushion, absorbing structural shock waves and ground vibrations.
Featherweight Form Factor: Minimizes total vehicle bulk and chassis drag, enhancing the agility and runtime of small autonomous cars.

Characteristic	Specification Parameters
Motor Classification	RS-555 Heavy-Duty Brushed Carbon DC Motor
Operating Voltage Range	6.0V to 18.0V DC (12V Nominal Power)
No-Load Angular Speed	~4000 RPM to 6000 RPM (at 12V DC)
Current Limits (at 12V)	0.2A No-Load / 1.2A Rated Peak / up to 3.0A Stall
Output Shaft Dimensions	3.17 mm Diameter × 16 mm Length
Mounting Blueprint	2 × M3 Bolt Holes spaced 25 mm apart on faceplate
Main Body Diameter	36 mm (37 mm with magnetic sleeve insulation)

Characteristic	Specification Parameters
Motor Type	Brushed DC Motor with Metal Spur Gearbox
Operating Voltage	6.0V to 24.0V DC (12V DC Nominal Output)
Base Speed (at 12V)	100 RPM
Rated Stall Torque	2.5 kg-cm to 3 kg-cm
No-Load / Load Current	60 mA (Max) / 300 mA (Max)
Shaft Dimensions	6 mm Diameter with internal M3 tapped hole
Main Frame Dimensions	35 mm Gearbox Diameter × 72 mm Overall Body Length

Characteristic	Specification Parameters
Motor Type	9g Analog Micro Servo
Operating Voltage	4.8V to 6.0V DC
Stall Torque	1.2 kg-cm to 1.8 kg-cm (at 4.8V)
Operating Speed	0.12 seconds / 60 degrees (at 4.8V)
Gear Train Material	Nylon / Hard Plastic
Dimensions (approx.)	23 mm × 12.2 mm × 29 mm

Characteristic	Specification Parameters
Motor Driving Configuration	4-Phase, 5-Wire Unipolar Stepper Motor
Nominal Operating Voltage	5.0V DC
Internal Mechanical Reduction	64:1 Gear Ratio
Stride Angle / Resolution	5.625° / 64
DC Coil Resistance (at 25°C)	50 Ω ± 7%
Pull-In / Detent Torque	≥ 34.3 mN⋅m (approx. 300 to 1,200 gf·cm)
Outer Chassis Diameter	28 mm

Characteristic	Specification Parameters
Motor Type	Brushed DC Motor with Metal Spur Gearbox
Operating Voltage	6.0V to 24.0V DC (12V DC Nominal Output)
Base Speed (at 12V)	3.5 RPM
Rated Stall Torque	12 kg-cm to 14 kg-cm (Up to 56 kg-cm maximum stall limit)
No-Load / Load Current	60 mA (Max) / 300 mA (Max)
Shaft Dimensions	6 mm Diameter with internal M3 tapped hole
Main Frame Dimensions	35 mm Gearbox Diameter × 72 mm Overall Body Length

Single Shaft BO Motor – (Battery Operated Geared DC Motor)

Reviews

RS-555 Multipurpose High-Torque DC Motor

100 RPM 12V DC Centre Shaft Geared Motor

SG90 9g Micro Servo Motor

28BYJ-48 5V Unipolar Geared Stepper Motor

3.5 RPM 12V DC Centre Shaft Geared Motor

1000 RPM 12V DC Centre Shaft Geared Motor

150 RPM 12V DC Centre Shaft Geared Motor

30 RPM 12V DC Centre Shaft Geared Motor

Single Shaft BO Motor – (Battery Operated Geared DC Motor)

Reviews

Related products