Name: 11.1V 3300mAh Lithium Polymer Battery Pack
SKU: VE-146
Availability: InStock

11.1V 3300mAh Lithium Polymer Battery Pack

Technical Specifications

Characteristic	Specification Parameters
Battery Chemistry Family	Lithium-Polymer (Li-Po High-Discharge Pouch Matrix)
Cell Configuration Matrix	3S1P (3 Cells wired in Series / 1 in Parallel)
Nominal Pack Voltage	11.1V DC
Full Charge Voltage Ceiling	12.6V DC (4.2V maximum per individual internal cell)
Critical Discharge Limit	9.0V DC (3.0V minimum per cell; lower drops permanently kill capacity)
Total Stored Energy	19.62 Wh (Watt-Hours)
Continuous Discharge Rating	35C (Yields up to 147 Amps of continuous current draw)
Peak Burst Rating	~70C (Instantaneous short duration acceleration current)
Wire & Connector Profile	12 AWG Silicone Wire Lead with XT60 or Deans Connector

The Pro-Range 11.1V 3300mAh 35C 3S Lithium Polymer Battery Pack is a high-capacity, high-discharge energy storage system engineered for demanding radio-controlled (RC) models, large drones, and industrial robotics. The “3S” architecture means it contains three premium lithium-polymer pouch cells wired in series to supply a steady nominal 11.1V. Delivering a robust 4200mAh capacity coupled with a 35C continuous discharge rate, this pack provides both long-lasting runtimes and the raw current burst capability needed to keep high-torque brushless motors from stalling under extreme loads. [

✨ Key Features

- Massive Continuous Current Output: Features a 35C rating that allows the pack to safely pump out high continuous currents to drive heavy payloads without voltage sagging.
- Extended Capacity Fuel Tank: Packs 3300mAh of energy, offering significantly longer operational windows and flight times than standard 2200mAh variants.
- Precise Cell Balance Tracking: Equipped with a standardized 4-wire JST-XH balance plug, allowing smart chargers to monitor, match, and log individual cell health during recovery cycles.
- Heavy-Duty Output Terminals: Pre-wired with thick, ultra-flexible, heat-resistant 12 AWG silicone wires terminated in an authentic, high-current connector (typically an XT60 or Deans T-Plug).

-20%

Click to enlarge

Back to products

Original price was: ₹1,500.00.Current price is: ₹1,200.00.

Characteristic	Specification Parameters
Battery Chemistry Family	Lithium-Polymer (Li-Po High-Discharge Pouch Matrix)
Cell Configuration Matrix	3S1P (3 Cells wired in Series / 1 in Parallel)
Nominal Pack Voltage	11.1V DC
Full Charge Voltage Ceiling	12.6V DC (4.2V maximum per individual internal cell)
Critical Discharge Limit	9.0V DC (3.0V minimum per cell; lower drops permanently kill capacity)
Total Stored Energy	19.62 Wh (Watt-Hours)
Continuous Discharge Rating	35C (Yields up to 147 Amps of continuous current draw)
Peak Burst Rating	~70C (Instantaneous short duration acceleration current)
Wire & Connector Profile	12 AWG Silicone Wire Lead with XT60 or Deans Connector

Compare

Add to wishlist

SKU: VE-146 Category: Batteries, Accessories

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “11.1V 3300mAh Lithium Polymer Battery Pack”

Shipping & Delivery

Related products

-43%

CR1220 Lithium Manganese Dioxide Coin Cell Battery

Batteries, Accessories

Characteristic	Specification Parameters
Battery Chemistry Core	Lithium Manganese Dioxide (LiMnO2) Primary Cell
IEC Standard Designation	CR1220 (Cross-references with DL1220, ECR1220, BR1220)
Nominal Voltage Output	3.0V DC
Average Charge Capacity	35 mAh to 40 mAh
Standard Continuous Drain	0.1 mA
Cell Structural Diameter	12.5 mm
Cell Structural Thickness	2.0 mm
Average Component Weight	Approx. 0.8 grams to 1.0 gram

Add to cart

Quick view

-15%

Raspberry Pi Zero Case

Technical Specification Details

Parameter	Specification Details
Board Compatibility	Raspberry Pi Zero \| Raspberry Pi Zero W \| Raspberry Pi Zero 2 W
Material Construction	Impact-resistant, high-durability ABS Plastic
Lid Configuration 1	Solid plain cover for complete dust-proof protection
Lid Configuration 2	Camera mount cover with custom slot to embed a camera module flush
Lid Configuration 3	GPIO breakout cover exposing the full 40-pin array for prototyping
Assembly Profile	Interlocking snap-fit frame alignment matrix
Physical Dimensions	78.8 mm × 37.0 mm × 15.5 mm
Product Weight	~28 Grams (unloaded)

-33%

LR41 Alkaline Manganese Dioxide Button Cell Battery

Characteristic	Specification Parameters
Battery Chemistry Core	Alkaline Manganese Dioxide (Zn/MnO2 Primary Cell)
Cross-Reference Equivalents	AG3, 392, SR41, G3, LR736, L736, 192, V3GA
Nominal Voltage Output	1.5V DC
Average Energy Capacity	~25 mAh to 32 mAh (Depending on discharge test rates)
Standard Continuous Drain	~0.05 mA to 0.1 mA baseline thresholds
Cell Dimensions	7.9 mm Diameter × 3.6 mm Height
Average Component Weight	Approx. 0.6 grams

12V 5A DC Power Adapter

Characteristic	Specification Parameters
Input AC Voltage Range	100V AC to 240V AC (Standard Indian Single-Phase Mains)
Input AC Frequency	50 Hz / 60 Hz
Output DC Voltage	12V DC Fixed
Maximum Output Current	5.0 Amperes (5000 mA) Continuous
Total Rated Power Capacity	60 Watts Max
Connector Dimension Profile	Standard 5.5 mm (Outer Diameter) × 2.1 mm or 2.5 mm (Inner Pin)
Connector Core Polarity	Center-Positive (Inner sleeve (+), Outer ring (-))
Form Factor Style	Desktop Type (requires a 3-pin IEC C13 or C5 AC power cord)

LR44 Button Cell Battery

Characteristic	Specification Parameters
Battery Chemistry Core	Alkaline Manganese Dioxide (Zn/MnO2 Primary Cell)
Cross-Reference Equivalents	AG13, A76, G13, L1154, V13GA, PX76
Nominal Voltage Output	1.5V DC
Average Energy Capacity	~110 mAh to 158 mAh (Depending on discharge load parameters)
Standard Continuous Drain	~0.1 mA to 0.2 mA baseline
Cell Dimensions	11.6 mm Diameter × 5.4 mm Height
Average Component Weight	Approx. 1.8 to 2.0 grams

Raspberry Pi Zero W Case

🔧 Advanced Data Sheet Specifications (For Technical Tabs)

Parameter	Specification Details
Board Compatibility	Raspberry Pi Zero W \| Raspberry Pi Zero 2 W \| Raspberry Pi Zero
Material Construction	Impact-resistant, high-durability ABS Plastic
Lid Configuration 1	Solid plain cover for complete dust-proof protection
Lid Configuration 2	Camera mount cover with custom slot to embed a camera module flush
Lid Configuration 3	GPIO breakout cover exposing the full 40-pin array for prototyping
Assembly Profile	Interlocking snap-fit frame alignment matrix
Physical Dimensions	78.8 mm × 37.0 mm × 15.5 mm
Product Weight	~28 Grams (unloaded)

Duracell Alkaline AA 1.5V Battery

The Duracell Alkaline AA 1.5V Battery (commonly searched for via typo as "AA batery durecell") is a high-performance, single-use cylindrical power cell engineered to drive both high-drain electronics and everyday household gadgets. Utilizing premium Alkaline-Manganese Dioxide chemistry, it provides up to 10 times longer lasting power compared to standard zinc-carbon batteries. Recognizable by its iconic "Copper Top" black and bronze design, it serves as the premium power solution across India for digital cameras, motorized toys, game controllers, and flashlights. [1, 2, 3, 4, 5]

Duralock Power Preserve Technology: Formulated to lock in chemical energy, guaranteeing a shelf life of up to 10 years in proper storage conditions.
Superior Leakage Prevention: Built with a robust mechanical top closure and specialized anti-corrosion steel casing to prevent dangerous runtime leaks.
High-Drain Optimisation: Capable of supplying consistent voltage without dropping under sudden high-current load pulses.
Wide Thermal Tolerance: Specially designed to operate smoothly across a wide temperature spectrum, maintaining efficiency in extreme environments.

Raspberry Pi 4 Protective Case

Parameter	Specification Details
Compatibility	Designed exclusively for Raspberry Pi 4 Model B (1GB, 2GB, 4GB, and 8GB variants)
Material Construction	High-durability, impact-resistant ABS Plastic
Access Openings	Power, Dual Display, Audio, Dual Camera/Display FPC slots, MicroSD slot, Activity LEDs
Assembly Style	3-Piece Snap-fit interlocking matrix
Ventilation Profile	Passive internal air cavity layout (Sufficient clearance for low-profile heatsinks)
Physical Dimensions	97.0 mm × 70.0 mm × 25.0 mm
Product Weight	~46 Grams (unloaded)