The Hi-Watt (HW) 9V Zinc-Carbon Non-Rechargeable Battery is a general-purpose PP3-sized dry cell power block. Encased inside a protective metal jacket body to shield its chemical core from structural leaking, this classic 6F22 cell uses zinc-carbon chemistry to deliver a steady nominal 9V DC output loop. Because it is exceptionally low cost and globally standard, it serves as the entry-level baseline power supply for multi-meters, wireless doorbells, remote toy cars, transistor radios, and temporary breadboard microcontroller prototypes.
-33%
18650 Lithium-Ion Rechargeable Battery Cell
Original price was: ₹65.00.₹50.00Current price is: ₹50.00.
11.1V 3300mAh Lithium Polymer Battery Pack
Original price was: ₹1,500.00.₹1,200.00Current price is: ₹1,200.00.
Hi-Watt (HW) 9V Non-Rechargeable Battery
Original price was: ₹30.00.₹20.00Current price is: ₹20.00.
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Battery Chemical Profile | Primary Zinc-Carbon (Non-Rechargeable dry cell) |
| Industry Standard Sizing | PP3 Framework / 6F22 Configuration |
| Nominal Output Voltage | 9.0V DC |
| Average Charge Capacity | ~500 mAh to 600 mAh under intermittent test conditions |
| Discharge Resistance Sizing | 620 Ω internal static resistance path |
| Continuous Discharge life | ~9 Hours under reference diagnostic loads |
| Discharge Cut-Off Ceiling | 5.4V DC Lower functional boundary |
| Operational Heat Window | -20°C up to +85°C Operating Limit |
| Module Base Dimensions | Approx. 48.5 mm × 26.5 mm × 17.5 mm |
Description
Reviews (0)
Shipping & Delivery
Related products
12V 7Ah Sealed Lead-Acid Rechargeable Battery
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Battery Chemistry Core | Sealed Lead Acid (SLA) / AGM VRLA Technology |
| Nominal System Voltage | 12.0V DC |
| Rated Storage Capacity | 7.0 Ah at a standard 20-hour discharge rate |
| Standby Float Charge Range | 13.5V to 13.8V DC at 25°C (Recommended for UPS/Standby) |
| Cyclic Charging Window | 14.4V to 15.0V DC Max (Recommended for Solar/Cyclic) |
| Maximum Charging Current | 2.1A (Exceeding this ceiling causes thermal swelling and gas build-up) |
| Terminal Connector Block | Standard F2 Faston Tabs (6.35 mm width) or F1 Tabs (4.75 mm width) |
| Chassis Main Dimensions | Approx. 151 mm × 65 mm × 94 mm (Standard Universal Blocks) |
| Average Operational Weight | Approx. 2.0 kg to 2.2 kg (Heavy internal lead grid density) |
Duracell Ultra Alkaline AA 1.5V Battery
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Battery Chemical Profile | Premium High-Performance Alkaline Manganese Dioxide (Zn/MnOâ‚‚) |
| Global Standard Sizing | AA / LR6 / MX1500 / 15A |
| Nominal Output Voltage | 1.5V DC |
| Internal Static Impedance | ~81 m-Ohm @ 1 kHz |
| Average Rated Capacity | ~1,500 mAh down to a 0.8V cut-off threshold |
| Operating Temperature | Reliable performance from -20°C up to 54°C |
| Rechargeable Attributes | No (Strictly single-use disposable; attempting to charge may explode) |
| Average Unit Component Weight | Approx. 24.0 grams to 25.0 grams per cell |
LR41 Alkaline Manganese Dioxide Button Cell Battery
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Battery Chemistry Core | Alkaline Manganese Dioxide (Zn/MnO2 Primary Cell) |
| Cross-Reference Equivalents | AG3, 392, SR41, G3, LR736, L736, 192, V3GA |
| Nominal Voltage Output | 1.5V DC |
| Average Energy Capacity | ~25 mAh to 32 mAh (Depending on discharge test rates) |
| Standard Continuous Drain | ~0.05 mA to 0.1 mA baseline thresholds |
| Cell Dimensions | 7.9 mm Diameter × 3.6 mm Height |
| Average Component Weight | Approx. 0.6 grams |
CR2032 Lithium Manganese Dioxide Coin Cell Battery
Technical Specifications
| Characteristic | Specification Parameters |
|---|---|
| Battery Chemistry Core | Lithium Manganese Dioxide (LiMnO2) Primary Cell |
| IEC Standard Designation | CR2032 (Cross references with DL2032, ECR2032) |
| Nominal Voltage Output | 3.0V DC |
| Average Charge Capacity | 220 mAh to 240 mAh |
| Standard Continuous Drain | 0.2 mA (Peak pulse capacity up to 15 mA) |
| Cell Structural Diameter | 20.0 mm |
| Cell Structural Thickness | 3.2 mm |
| Average Component Weight | Approx. 3.0 grams |
Raspberry Pi Zero Case
 Technical Specification DetailsÂ
| Parameter | Specification Details |
|---|---|
| Board Compatibility | Raspberry Pi Zero | Raspberry Pi Zero W | Raspberry Pi Zero 2 W |
| Material Construction | Impact-resistant, high-durability ABS Plastic |
| Lid Configuration 1 | Solid plain cover for complete dust-proof protection |
| Lid Configuration 2 | Camera mount cover with custom slot to embed a camera module flush |
| Lid Configuration 3 | GPIO breakout cover exposing the full 40-pin array for prototyping |
| Assembly Profile | Interlocking snap-fit frame alignment matrix |
| Physical Dimensions | 78.8 mm × 37.0 mm × 15.5 mm |
| Product Weight | ~28 Grams (unloaded) |
Raspberry Pi Zero W Case
🔧 Advanced Data Sheet Specifications (For Technical Tabs)
| Parameter | Specification Details |
|---|---|
| Board Compatibility | Raspberry Pi Zero W | Raspberry Pi Zero 2 W | Raspberry Pi Zero |
| Material Construction | Impact-resistant, high-durability ABS Plastic |
| Lid Configuration 1 | Solid plain cover for complete dust-proof protection |
| Lid Configuration 2 | Camera mount cover with custom slot to embed a camera module flush |
| Lid Configuration 3 | GPIO breakout cover exposing the full 40-pin array for prototyping |
| Assembly Profile | Interlocking snap-fit frame alignment matrix |
| Physical Dimensions | 78.8 mm × 37.0 mm × 15.5 mm |
| Product Weight | ~28 Grams (unloaded) |
Raspberry Pi 4 Protective Case
Technical Specification Details
| Parameter | Specification Details |
|---|---|
| Compatibility | Designed exclusively for Raspberry Pi 4 Model B (1GB, 2GB, 4GB, and 8GB variants) |
| Material Construction | High-durability, impact-resistant ABS Plastic |
| Access Openings | Power, Dual Display, Audio, Dual Camera/Display FPC slots, MicroSD slot, Activity LEDs |
| Assembly Style | 3-Piece Snap-fit interlocking matrix |
| Ventilation Profile | Passive internal air cavity layout (Sufficient clearance for low-profile heatsinks) |
| Physical Dimensions | 97.0 mm × 70.0 mm × 25.0 mm |
| Product Weight | ~46 Grams (unloaded) |
SanDisk Ultra 64GB MicroSD Memory Card
Technical Specification Details
| Parameter | Specification Details |
|---|---|
| Storage Capacity | 64 GB Flash Storage Memory |
| Form Factor Profile | MicroSD (Extended Capacity) |
| Bus Interface Speed | UHS-I (Ultra High Speed Class 1) |
| Performance Classification | Class 10 | App Performance Class 1 (A1) | Speed Class 1 (U1) |
| Sequential Read Speed | Up to 140 MB/s max |
| Random Read Input/Output | 1500 IOPS minimum |
| Random Write Input/Output | 500 IOPS minimum |
| Filesystem Optimization | Pre-formatted to exFAT standard |
Reviews
There are no reviews yet.