Name: 12V 1.2Ah Sealed Lead-Acid Rechargeable Battery
SKU: VE-147
Price: 500.00 INR
Availability: InStock

12V 1.2Ah Sealed Lead-Acid Rechargeable Battery

Technical Specifications

Characteristic	Specification Parameters
Battery Chemistry Core	Sealed Lead Acid (SLA) / AGM VRLA Technology
Nominal System Voltage	12.0V DC
Rated Storage Capacity	1.2 Ah at a standard 20-hour discharge rate
Standby Float Charge Range	13.5V to 13.8V DC at 25°C
Cyclic Charging Window	14.4V to 15.0V DC Max
Maximum Charging Current	0.36A (Too much charging current causes thermal swelling)
Terminal Connector Block	Standard F1 Faston Tabs (4.75 mm / 0.187 inch width)
Chassis Main Dimensions	Approx. 97 mm × 43 mm × 52 mm (Standard Pocket Box Size)
Average Operational Weight	Approx. 0.55 kg (1.21 lbs)

The 12V 1.2Ah Sealed Lead-Acid (SLA) Rechargeable Battery is a compact, valve-regulated lead-acid (VRLA) power block designed for backup power and light cyclic applications. Utilizing advanced Absorbent Glass Mat (AGM) technology, the internal acid electrolyte is fully absorbed in fiberglass separators, making the unit completely spill-proof and maintenance-free with no water top-ups required. It is the industry-standard energy storage unit for emergency lighting, home security alarm panels, electronic weighing scales, and medical equipment telemetry systems.

✨ Key Features

Spill-Proof VRLA Construction: Features a completely sealed layout that allows the battery to operate safely in any physical orientation without leaking acid.
Gas Recombination Engine: Uses internal gas recombination technology to recombine hydrogen and oxygen generated during charging, eliminating outgassing.
Low Self-Discharge Rate: Retains its shelf life over months of standby storage, ensuring critical backup devices trigger instantly during power failures.
Standard F1 Faston Terminals: Outfitted with 4.75 mm flat spade terminals (Type F1) for quick, reliable slide-on wire connections without soldering.

-17%

Click to enlarge

Back to products

Original price was: ₹600.00.Current price is: ₹500.00.

Characteristic	Specification Parameters
Battery Chemistry Core	Sealed Lead Acid (SLA) / AGM VRLA Technology
Nominal System Voltage	12.0V DC
Rated Storage Capacity	1.2 Ah at a standard 20-hour discharge rate
Standby Float Charge Range	13.5V to 13.8V DC at 25°C
Cyclic Charging Window	14.4V to 15.0V DC Max
Maximum Charging Current	0.36A (Too much charging current causes thermal swelling)
Terminal Connector Block	Standard F1 Faston Tabs (4.75 mm / 0.187 inch width)
Chassis Main Dimensions	Approx. 97 mm × 43 mm × 52 mm (Standard Pocket Box Size)
Average Operational Weight	Approx. 0.55 kg (1.21 lbs)

Compare

Add to wishlist

SKU: VE-147 Category: Batteries, Accessories

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “12V 1.2Ah Sealed Lead-Acid Rechargeable Battery”

Shipping & Delivery

Related products

-15%

Raspberry Pi Zero Case

Batteries, Accessories

Technical Specification Details

Parameter	Specification Details
Board Compatibility	Raspberry Pi Zero \| Raspberry Pi Zero W \| Raspberry Pi Zero 2 W
Material Construction	Impact-resistant, high-durability ABS Plastic
Lid Configuration 1	Solid plain cover for complete dust-proof protection
Lid Configuration 2	Camera mount cover with custom slot to embed a camera module flush
Lid Configuration 3	GPIO breakout cover exposing the full 40-pin array for prototyping
Assembly Profile	Interlocking snap-fit frame alignment matrix
Physical Dimensions	78.8 mm × 37.0 mm × 15.5 mm
Product Weight	~28 Grams (unloaded)

Add to cart

Quick view

-92%

SanDisk Ultra 32GB MicroSD Memory Card.

Parameter	Specification Details
Storage Capacity	32 GB Flash Storage Memory
Form Factor Profile	MicroSD (High Capacity)
Bus Interface Speed	UHS-I (Ultra High Speed Class 1)
Performance Classification	Class 10 \| App Performance Class 1 (A1)
Sequential Read Speed	Up to 120 MB/s max
Random Read Input/Output	1500 IOPS minimum
Random Write Input/Output	500 IOPS minimum
Filesystem Optimization	Pre-formatted to FAT32 standard

12V Lithium-Ion Battery Pack with DC Barrel Jack

Characteristic	Specification Parameters
Internal Cell Assembly	Lithium-Ion 18650 Format in a 3S arrangement (3 Series)
Nominal System Voltage	11.1V DC to 12.0V DC
Full Charge Peak Ceiling	12.6V DC Max Voltage Profile
Discharge Cut-Off Safety	~9.0V DC BMS Threshold Limit
Popular Capacity Offerings	Ranges of 2000mAh
Interface Port Connector	5.5 mm × 2.1 mm DC Barrel Plug (Center-Positive configuration)
Continuous Discharge Limit	~2A to 5A Continuous Output Current (BMS variant dependent)

Raspberry Pi 5 Active Cooler

Parameter	Specification Details
System Compatibility	Designed exclusively for the Raspberry Pi 5 ecosystem
Material Build	Premium structural-grade Anodized Aluminum
Input Supply Voltage	5V DC supplied via the dedicated 4-pin fan connector
Fan Control Array	Pulse Width Modulation (PWM) with active tachometer loopback
Airflow Volume Rate	Maximum volumetric displacement of 1.09 CFM
Maximum Rotation Speed	8000 RPM (±15%)
Thermal Interfacer	High-performance solid-state pre-cut thermal pads

-33%

LR44 Button Cell Battery

Characteristic	Specification Parameters
Battery Chemistry Core	Alkaline Manganese Dioxide (Zn/MnO2 Primary Cell)
Cross-Reference Equivalents	AG13, A76, G13, L1154, V13GA, PX76
Nominal Voltage Output	1.5V DC
Average Energy Capacity	~110 mAh to 158 mAh (Depending on discharge load parameters)
Standard Continuous Drain	~0.1 mA to 0.2 mA baseline
Cell Dimensions	11.6 mm Diameter × 5.4 mm Height
Average Component Weight	Approx. 1.8 to 2.0 grams

Raspberry Pi Zero W Case

🔧 Advanced Data Sheet Specifications (For Technical Tabs)

Parameter	Specification Details
Board Compatibility	Raspberry Pi Zero W \| Raspberry Pi Zero 2 W \| Raspberry Pi Zero
Material Construction	Impact-resistant, high-durability ABS Plastic
Lid Configuration 1	Solid plain cover for complete dust-proof protection
Lid Configuration 2	Camera mount cover with custom slot to embed a camera module flush
Lid Configuration 3	GPIO breakout cover exposing the full 40-pin array for prototyping
Assembly Profile	Interlocking snap-fit frame alignment matrix
Physical Dimensions	78.8 mm × 37.0 mm × 15.5 mm
Product Weight	~28 Grams (unloaded)

SanDisk Ultra 64GB MicroSD Memory Card

Parameter	Specification Details
Storage Capacity	64 GB Flash Storage Memory
Form Factor Profile	MicroSD (Extended Capacity)
Bus Interface Speed	UHS-I (Ultra High Speed Class 1)
Performance Classification	Class 10 \| App Performance Class 1 (A1) \| Speed Class 1 (U1)
Sequential Read Speed	Up to 140 MB/s max
Random Read Input/Output	1500 IOPS minimum
Random Write Input/Output	500 IOPS minimum
Filesystem Optimization	Pre-formatted to exFAT standard

-20%

11.1V 3300mAh Lithium Polymer Battery Pack

Characteristic	Specification Parameters
Battery Chemistry Family	Lithium-Polymer (Li-Po High-Discharge Pouch Matrix)
Cell Configuration Matrix	3S1P (3 Cells wired in Series / 1 in Parallel)
Nominal Pack Voltage	11.1V DC
Full Charge Voltage Ceiling	12.6V DC (4.2V maximum per individual internal cell)
Critical Discharge Limit	9.0V DC (3.0V minimum per cell; lower drops permanently kill capacity)
Total Stored Energy	19.62 Wh (Watt-Hours)
Continuous Discharge Rating	35C (Yields up to 147 Amps of continuous current draw)
Peak Burst Rating	~70C (Instantaneous short duration acceleration current)
Wire & Connector Profile	12 AWG Silicone Wire Lead with XT60 or Deans Connector