Name: Raspberry Pi 5 Active Cooler
SKU: VE-027
Price: 650.00 INR
Availability: InStock

Raspberry Pi 5 Active Cooler

Technical Specification Details

Parameter	Specification Details
System Compatibility	Designed exclusively for the Raspberry Pi 5 ecosystem
Material Build	Premium structural-grade Anodized Aluminum
Input Supply Voltage	5V DC supplied via the dedicated 4-pin fan connector
Fan Control Array	Pulse Width Modulation (PWM) with active tachometer loopback
Airflow Volume Rate	Maximum volumetric displacement of 1.09 CFM
Maximum Rotation Speed	8000 RPM (±15%)
Thermal Interfacer	High-performance solid-state pre-cut thermal pads

Prevent thermal throttling and push your performance limits with the Official Raspberry Pi 5 Active Cooler. Specifically designed for users who want to operate their Raspberry Pi 5 under sustained heavy computational benchmarks without a case, this clip-on module combines a massive solid-metal thermal block with a variable-speed blower. It keeps your core CPU, RAM chip, and power management circuits cool even during heavy execution states or experimental overclocking.

Key Product Features

Single-Piece Thermal Mass: Features a premium, precision-milled anodized aluminum heatsink that covers all primary high-heat components on the Pi 5 PCB.
Smart Temperature Control: Outfitted with a whisper-quiet, software-managed blower fan that dynamically increases its speed up to 8000 RPM as the CPU warms up.
Effortless Snap Mounting: Attaches securely in seconds using dual spring-loaded push pins that anchor right into the Pi 5 pre-drilled board slots.
Ready-to-Install Design: Arrives with pre-applied high-conductivity thermal pads, eliminating the mess of applying loose thermal paste during assembly.
HAT Expansion Friendly: The slim, low-profile height profile allows you to stack standard extension HATs on top using standard 16mm header spacers

-15%

Click to enlarge

Back to products

Original price was: ₹767.00.Current price is: ₹650.00.

Parameter	Specification Details
System Compatibility	Designed exclusively for the Raspberry Pi 5 ecosystem
Material Build	Premium structural-grade Anodized Aluminum
Input Supply Voltage	5V DC supplied via the dedicated 4-pin fan connector
Fan Control Array	Pulse Width Modulation (PWM) with active tachometer loopback
Airflow Volume Rate	Maximum volumetric displacement of 1.09 CFM
Maximum Rotation Speed	8000 RPM (±15%)
Thermal Interfacer	High-performance solid-state pre-cut thermal pads

Compare

Add to wishlist

SKU: VE-027 Category: Batteries, Accessories

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Raspberry Pi 5 Active Cooler”

Shipping & Delivery

Related products

-23%

18650 Lithium-Ion Rechargeable Battery Cell

Batteries, Accessories

Technical Specifications

Characteristic	Specification Parameters
Battery Chemistry Type	Lithium-Ion (Li-Ion) Cylindrical Cell
Standard Core Sizing	18650 Baseline (Protected layout extended to ~18675 sizing)
Nominal Voltage Rating	3.6V to 3.7V DC
Full Charge Voltage Ceiling	4.2V DC Max
Discharge Cut-off Limit	2.5V to 3.0V DC (Going below this can permanently kill the cell)
Average Capacity Range	1,200 mAh (Budget) up to 3,500+ mAh (Premium cells)
Maximum Discharge Rate	Variable by grade (Typically 1C for storage cells up to 10C+ for power tool cells)

Add to cart

Quick view

12V Lithium-Ion Battery Pack with DC Barrel Jack

Characteristic	Specification Parameters
Internal Cell Assembly	Lithium-Ion 18650 Format in a 3S arrangement (3 Series)
Nominal System Voltage	11.1V DC to 12.0V DC
Full Charge Peak Ceiling	12.6V DC Max Voltage Profile
Discharge Cut-Off Safety	~9.0V DC BMS Threshold Limit
Popular Capacity Offerings	Ranges of 2000mAh
Interface Port Connector	5.5 mm × 2.1 mm DC Barrel Plug (Center-Positive configuration)
Continuous Discharge Limit	~2A to 5A Continuous Output Current (BMS variant dependent)

-92%

SanDisk Ultra 32GB MicroSD Memory Card.

Parameter	Specification Details
Storage Capacity	32 GB Flash Storage Memory
Form Factor Profile	MicroSD (High Capacity)
Bus Interface Speed	UHS-I (Ultra High Speed Class 1)
Performance Classification	Class 10 \| App Performance Class 1 (A1)
Sequential Read Speed	Up to 120 MB/s max
Random Read Input/Output	1500 IOPS minimum
Random Write Input/Output	500 IOPS minimum
Filesystem Optimization	Pre-formatted to FAT32 standard

-17%

12V 1.2Ah Sealed Lead-Acid Rechargeable Battery

Characteristic	Specification Parameters
Battery Chemistry Core	Sealed Lead Acid (SLA) / AGM VRLA Technology
Nominal System Voltage	12.0V DC
Rated Storage Capacity	1.2 Ah at a standard 20-hour discharge rate
Standby Float Charge Range	13.5V to 13.8V DC at 25°C
Cyclic Charging Window	14.4V to 15.0V DC Max
Maximum Charging Current	0.36A (Too much charging current causes thermal swelling)
Terminal Connector Block	Standard F1 Faston Tabs (4.75 mm / 0.187 inch width)
Chassis Main Dimensions	Approx. 97 mm × 43 mm × 52 mm (Standard Pocket Box Size)
Average Operational Weight	Approx. 0.55 kg (1.21 lbs)

-43%

CR1220 Lithium Manganese Dioxide Coin Cell Battery

Characteristic	Specification Parameters
Battery Chemistry Core	Lithium Manganese Dioxide (LiMnO2) Primary Cell
IEC Standard Designation	CR1220 (Cross-references with DL1220, ECR1220, BR1220)
Nominal Voltage Output	3.0V DC
Average Charge Capacity	35 mAh to 40 mAh
Standard Continuous Drain	0.1 mA
Cell Structural Diameter	12.5 mm
Cell Structural Thickness	2.0 mm
Average Component Weight	Approx. 0.8 grams to 1.0 gram

12V 7Ah Sealed Lead-Acid Rechargeable Battery

Characteristic	Specification Parameters
Battery Chemistry Core	Sealed Lead Acid (SLA) / AGM VRLA Technology
Nominal System Voltage	12.0V DC
Rated Storage Capacity	7.0 Ah at a standard 20-hour discharge rate
Standby Float Charge Range	13.5V to 13.8V DC at 25°C (Recommended for UPS/Standby)
Cyclic Charging Window	14.4V to 15.0V DC Max (Recommended for Solar/Cyclic)
Maximum Charging Current	2.1A (Exceeding this ceiling causes thermal swelling and gas build-up)
Terminal Connector Block	Standard F2 Faston Tabs (6.35 mm width) or F1 Tabs (4.75 mm width)
Chassis Main Dimensions	Approx. 151 mm × 65 mm × 94 mm (Standard Universal Blocks)
Average Operational Weight	Approx. 2.0 kg to 2.2 kg (Heavy internal lead grid density)

-20%

Duracell Alkaline AA 1.5V Battery

The Duracell Alkaline AA 1.5V Battery (commonly searched for via typo as "AA batery durecell") is a high-performance, single-use cylindrical power cell engineered to drive both high-drain electronics and everyday household gadgets. Utilizing premium Alkaline-Manganese Dioxide chemistry, it provides up to 10 times longer lasting power compared to standard zinc-carbon batteries. Recognizable by its iconic "Copper Top" black and bronze design, it serves as the premium power solution across India for digital cameras, motorized toys, game controllers, and flashlights. [1, 2, 3, 4, 5]

✨ Key Features

Duralock Power Preserve Technology: Formulated to lock in chemical energy, guaranteeing a shelf life of up to 10 years in proper storage conditions.
Superior Leakage Prevention: Built with a robust mechanical top closure and specialized anti-corrosion steel casing to prevent dangerous runtime leaks.
High-Drain Optimisation: Capable of supplying consistent voltage without dropping under sudden high-current load pulses.
Wide Thermal Tolerance: Specially designed to operate smoothly across a wide temperature spectrum, maintaining efficiency in extreme environments.

Raspberry Pi 4 15.3W USB-C Power Adapter (5.1V 3A)

Specification Details Output Voltage : +5.1 V DC Maximum Current: 3.0 Amps Total Power Capacity: 15.3 Watts Input AC Range: 96V AC to 264V AC (Supports global standards) AC Frequency Range: 50 / 60 Hz (±3Hz) Cable Specifications1.5 Meter Long, 18 AWG Gauge Output Connection: Fixed Captive USB Type-C Connector No-Load Consumption: Less than 0.075 Watts maximum Ripple & Noise: 120 mVp-p maximum Efficiency Rating: Meets Energy Star Level VI high-efficiency standards