Name: RC522- RFID Smart Card
SKU: VE-064
Availability: InStock

RC522- RFID Smart Card

Technical Specification Details

Parameter	Specification Details
Operating Frequency	13.56 MHz High-Frequency (HF)
Chip Architecture Core	MIFARE Classic 1K Compatible (S50)
Memory Capacity	1024 Bytes (1 KB) EEPROM
Storage Structure Layout	16 Sectors (Each sector contains 4 Blocks; 1 Block holds 16 Bytes)
Unique Identification Number	4-Byte Non-Changeable Unique ID (UID)
Communication Protocol	ISO / IEC 14443 Type A Standard
Typical Data Retention	Engineered to hold written data securely for over 10 Years
Sensing Distance Threshold	2 cm to 10 cm (Subject to your reader antenna power profile)
Physical Proportions	85.6 mm × 54.0 mm × 0.8 mm (Standard CR80 Credit Card Size)

SKU: VE-064 Category: Sensors

Expand your access control and authentication networks with this high-quality Pack of 4 Blank 13.56MHz RFID Cards. Specifically engineered to offer complete compatibility with the popular RC522 and PN532 reader/writer modules, each smart card features a built-in high-frequency antenna and an authentic MIFARE Classic 1K architecture. With 1 KB of internal EEPROM storage split into secure sectors, these cards allow you to read and write custom data strings, change passwords, and save secure metrics. They are the ideal bulk choice for company attendance logs, student ID badges, smart hotel keycards, and custom automated locker locks. [

Key Product Features

Complete RC522 Compatibility: Operating at the precise 13.56 MHz proximity frequency, these cards are guaranteed to link perfectly with standard MFRC522 and PN532 sensor networks.
1KB Secure EEPROM Storage: Features a spacious 1024-byte storage core divided into 16 independent sectors, with each sector protected by dual distinct access keys to prevent data spoofing.
Pre-programed Unique 4-Byte UID: Every single card ships with a unique factory-locked 4-byte identification number pre-flashed, enabling instant plug-and-play white-listing for smart locks.
Premium Printable PVC Build: Crafted from smooth, standard CR80-sized white PVC with clean, flat edges, making them fully compatible with standard dye-sublimation card printers for printing custom text, photos, or logos.
Passive Battery-Free Tech: Uses advanced magnetic induction to draw power directly from your reader’s electromagnetic field, eliminating the need for internal batteries

-14%

Click to enlarge

Back to products

Original price was: ₹35.00.Current price is: ₹30.00.

Parameter	Specification Details
Operating Frequency	13.56 MHz High-Frequency (HF)
Chip Architecture Core	MIFARE Classic 1K Compatible (S50)
Memory Capacity	1024 Bytes (1 KB) EEPROM
Storage Structure Layout	16 Sectors (Each sector contains 4 Blocks; 1 Block holds 16 Bytes)
Unique Identification Number	4-Byte Non-Changeable Unique ID (UID)
Communication Protocol	ISO / IEC 14443 Type A Standard
Typical Data Retention	Engineered to hold written data securely for over 10 Years
Sensing Distance Threshold	2 cm to 10 cm (Subject to your reader antenna power profile)
Physical Proportions	85.6 mm × 54.0 mm × 0.8 mm (Standard CR80 Credit Card Size)

Compare

Add to wishlist

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “RC522- RFID Smart Card”

Shipping & Delivery

Related products

-29%

ACS712 Current Sensor Module – 20A

Sensors

Parameter	Specification Details
Primary Sensor IC	Allegro MicroSystems ACS712
Sensing Engine Mechanism	Linear Hall-Effect Sensor Array
Operating Input Supply	5.0V DC Single Supply (Power LED Indicator Onboard)
Conductor Path Resistance	Low 1.2 mΩ internal resistance path
Output Type Profile	Ratiometric Analog Voltage (0.5V to 4.5V output window)
Zero Current Bias Point	VCC / 2 (Approximately 2.5V DC)
Module Sensitivities	20A Variant: 100 mV/A
Total System Accuracy	1.5% Error Index threshold calibration at room temperature
Physical Dimensions	31.0 mm × 13.0 mm × 13.5 mm low profile

Add to cart

Quick view

-20%

LDR Light Sensor Module

Technical Specifications

Characteristic	Specification Parameters
Sensor Principle	Photoconductive Cadmium Sulfide (CdS) Resistance Shifts
Operating Voltage	3.3V to 5.0V DC (Fully logic-compatible)
Current Consumption	~15 mA (Ultra-low standby drain)
Comparator IC Type	LM393 Dual Differential Hardware Comparator
Spectral Peak Sensitivity	~540 nm (Closely matches human eye visibility)
Output Interfacing	Digital TTL (0V / 5V) and Analog Voltage (0V to VCC)

-15%

Dual-Axis PS2 Joystick Breakout Module

Parameter	Specification Details
Operating Input Supply	3.3V to 5.0V DC (Logic-level matched to host microcontroller)
Potentiometer Resistance	Dual 10kΩ linear potentiometers (X and Y axes)
Output Type Profile	2 × Analog Voltage Outputs (VRx, VRy) \| 1 × Digital TTL Output (SW)
Center Bias Point	Outputs approximately VCC / 2 when at rest in the center position
Switch Operation Style	Momentary tactile switch (Needs a pull-up resistor, outputs LOW when pressed)
Operational Lifespan	Rated for more than 1,000,000 cycles of structural deflection
Physical Proportions	40.0 mm × 26.0 mm × 32.0 mm

ACS712 Current Sensor Module – 10A

Parameter	Specification Details
Primary Sensor IC	Allegro MicroSystems ACS712
Sensing Engine Mechanism	Linear Hall-Effect Sensor Array
Operating Input Supply	5.0V DC Single Supply (Power LED Indicator Onboard)
Conductor Path Resistance	Low 1.2 mΩ internal resistance path
Output Type Profile	Ratiometric Analog Voltage (0.5V to 4.5V output window)
Zero Current Bias Point	VCC / 2 (Approximately 2.5V DC)
Module Sensitivities	10A Variant: 195 mV/A
Total System Accuracy	1.5% Error Index threshold calibration at room temperature
Physical Dimensions	31.0 mm × 13.0 mm × 13.5 mm low profile

ACS712 Current Sensor Module – 5A

Parameter	Specification Details
Primary Sensor IC	Allegro MicroSystems ACS712
Sensing Engine Mechanism	Linear Hall-Effect Sensor Array
Operating Input Supply	5.0V DC Single Supply (Power LED Indicator Onboard)
Conductor Path Resistance	Low 1.2 mΩ internal resistance path
Output Type Profile	Ratiometric Analog Voltage (0.5V to 4.5V output window)
Zero Current Bias Point	VCC / 2 (Approximately 2.5V DC)
Module Sensitivities	5A Variant: 185 mV/A
Total System Accuracy	1.5% Error Index threshold calibration at room temperature
Physical Dimensions	31.0 mm × 13.0 mm × 13.5 mm low profile

TTP223 Capacitive Touch Sensor Module

Parameter	Specification Details
Sensing IC Chipset	TTP223-BA6 TonTouch Capacitive Detector
Operating Voltage Range	2.0V to 5.5V DC
Response Time Max	~60ms at fast mode \| ~220ms at low-power standby mode
Output Logic Mode	Default: Momentary Active-High (Configurable via solder pads)
Current Consumption	Ultra-low 1.5 µA to 3.0 µA baseline power draw
Default Jumper State A	Open: Active-High Output \| Shorted: Active-Low Output
Default Jumper State B	Open: Momentary Switch \| Shorted: Self-Locking / Latching Toggle
Physical Dimensions	15.0 mm × 11.0 mm micro-footprint layout profile

PN532 NFC RFID Module V3

Parameter	Specification Details
Core Chipset Architecture	NXP Semiconductors PN532
Radio Frequency Band	13.56 MHz ISM Band
Operating Voltage Supply	3.3V to 5.5V DC (Stable onboard regulation)
Interface Protocol Options	I2C (Default) \| SPI \| High-Speed UART / HSU (115.2kbps)
Communication Range	50 mm to 70 mm maximum (Subject to tag antenna geometry)
NFC Working Modes	Reader/Writer Mode \| Peer-to-Peer Mode \| Card Emulation Mode
Supported Card Protocols	ISO/IEC 14443A \| ISO/IEC 14443B \| FeliCa \| Innovision Jewel
Physical Dimensions	43.0 mm × 40.5 mm × 4.0 mm

HC-SR04 Ultrasonic Sensor Module

Parameter	Specification Details
Operating Voltage Range	3.0V to 5.5V DC (Highly versatile input range)
Quiescent Current Draw	Under 3mA during active operation
Acoustic Burst Frequency	40 kHz Ultrasonic wave pattern
Measurement Coverage Range	2 cm to 400 cm (4 meters)
Effective Detection Angle	15-Degree measurement cone aperture
Input Trigger Pulse	Needs a minimum 10-microsecond High TTL signal to fire sonar
Output Echo Pulse	TTL level matched directly to your VCC input supply voltage
Physical Board Proportions	45 mm × 20 mm × 15 mm