Name: PN532 NFC RFID Module V3
SKU: VE-063
Availability: InStock

PN532 NFC RFID Module V3

Technical Specification Details

Parameter	Specification Details
Core Chipset Architecture	NXP Semiconductors PN532
Radio Frequency Band	13.56 MHz ISM Band
Operating Voltage Supply	3.3V to 5.5V DC (Stable onboard regulation)
Interface Protocol Options	I2C (Default) \| SPI \| High-Speed UART / HSU (115.2kbps)
Communication Range	50 mm to 70 mm maximum (Subject to tag antenna geometry)
NFC Working Modes	Reader/Writer Mode \| Peer-to-Peer Mode \| Card Emulation Mode
Supported Card Protocols	ISO/IEC 14443A \| ISO/IEC 14443B \| FeliCa \| Innovision Jewel
Physical Dimensions	43.0 mm × 40.5 mm × 4.0 mm

SKU: VE-063 Category: Sensors

Unlock the full power of Near Field Communication with the PN532 NFC RFID Module V3 Kit. Driven by the highly advanced NXP PN532 transceiver chip, this module goes far beyond basic RFID card readers. It supports true NFC cell phone interaction, peer-to-peer data sharing, and card emulation. It features an onboard 2-position DIP switch that lets you easily toggle between I2C, SPI, and High-Speed UART (HSU) communication protocols. It is the absolute premier choice for building contact-less payment simulators, mobile phone authentication locks, smart attendance logs, and interactive IoT checkpoints.

Key Product Features

True Smart Phone NFC Support: Natively communicates with NFC-enabled Android and iOS smartphones to exchange raw data strings, read virtual cards, or launch automated URLs.
Triple Protocol Flexibility: Outfitted with an onboard hardware DIP switch to effortlessly choose between SPI, I2C, or High-Speed UART (HSU) communication without re-wiring.
RFID Read and Write Engine: Fully compatible with a massive array of passive proximity tags, including MIFARE 1K, 4K, Ultralight, and DesFire architectures.
Built-in PCB Trace Antenna: Features a premium, high-frequency antenna etched directly into the PCB layout, providing a stable, reliable sensing field without external bulk.
Onboard Shifter Leveling: Includes an integrated logic level shifter circuit, making it 100% safe to interface natively with 5V boards (like Arduino Uno) and 3.3V boards (like ESP32 or Raspberry Pi).

-15%

Click to enlarge

Back to products

Original price was: ₹531.00.Current price is: ₹450.00.

Parameter	Specification Details
Core Chipset Architecture	NXP Semiconductors PN532
Radio Frequency Band	13.56 MHz ISM Band
Operating Voltage Supply	3.3V to 5.5V DC (Stable onboard regulation)
Interface Protocol Options	I2C (Default) \| SPI \| High-Speed UART / HSU (115.2kbps)
Communication Range	50 mm to 70 mm maximum (Subject to tag antenna geometry)
NFC Working Modes	Reader/Writer Mode \| Peer-to-Peer Mode \| Card Emulation Mode
Supported Card Protocols	ISO/IEC 14443A \| ISO/IEC 14443B \| FeliCa \| Innovision Jewel
Physical Dimensions	43.0 mm × 40.5 mm × 4.0 mm

Compare

Add to wishlist

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “PN532 NFC RFID Module V3”

Shipping & Delivery

Related products

-16%

RC522 RFID Card Reader Module Kit

Sensors

Parameter	Specification Details
Primary Chipset Silicon	NXP Semiconductors MFRC522
Radio Frequency Band	13.56 MHz ISM Proximity Band
Operating Logic Voltage	3.3V DC (Pins are 5V tolerant for signal inputs)
Current Draw Profile	13–26mA (Active read) \| 10–13mA (Idle) \| <80µA (Sleep mode)
Maximum Data Rate	Up to 10 Mbps over the SPI interface protocol
Effective Sensing Range	≥ 50 mm (Subject to tag antenna geometry configurations)
Supported Card Arrays	MIFARE 1 S50 \| MIFARE 1 S70 \| MIFARE Ultralight \| MIFARE Pro
System Interface Bus	Serial Peripheral Interface (SPI) default mode
Physical Proportions	40.0 mm × 60.0 mm compact footprint card layout

Add to cart

Quick view

-13%

TTP223 Capacitive Touch Sensor Module

Parameter	Specification Details
Sensing IC Chipset	TTP223-BA6 TonTouch Capacitive Detector
Operating Voltage Range	2.0V to 5.5V DC
Response Time Max	~60ms at fast mode \| ~220ms at low-power standby mode
Output Logic Mode	Default: Momentary Active-High (Configurable via solder pads)
Current Consumption	Ultra-low 1.5 µA to 3.0 µA baseline power draw
Default Jumper State A	Open: Active-High Output \| Shorted: Active-Low Output
Default Jumper State B	Open: Momentary Switch \| Shorted: Self-Locking / Latching Toggle
Physical Dimensions	15.0 mm × 11.0 mm micro-footprint layout profile

HC-SR501 PIR Motion Sensor Module

Parameter	Specification Details
Sensing IC Hardware Core	BISS0001 Micro Power PIR Motion Detector IC
Operating Voltage Range	4.5V to 20V DC
Quiescent Power Standby	Under 60 µA peak drain
Data Signal Output Level	High: 3.3V TTL \| Low: 0V
Delay Tuning Range	5 Seconds to 300 Seconds (Adjustable)
Blockade Blind Spot Duration	2.5 Seconds default (Prevents repetitive false triggers)
Detection Coverage Distance	3 Meters to 7 Meters maximum (Potentiometer variable)
Operating Temperatures	-15°C to +70°C
Physical Proportions	32 mm × 24 mm × 18 mm

-29%

ACS712 Current Sensor Module – 20A

Parameter	Specification Details
Primary Sensor IC	Allegro MicroSystems ACS712
Sensing Engine Mechanism	Linear Hall-Effect Sensor Array
Operating Input Supply	5.0V DC Single Supply (Power LED Indicator Onboard)
Conductor Path Resistance	Low 1.2 mΩ internal resistance path
Output Type Profile	Ratiometric Analog Voltage (0.5V to 4.5V output window)
Zero Current Bias Point	VCC / 2 (Approximately 2.5V DC)
Module Sensitivities	20A Variant: 100 mV/A
Total System Accuracy	1.5% Error Index threshold calibration at room temperature
Physical Dimensions	31.0 mm × 13.0 mm × 13.5 mm low profile

ACS712 Current Sensor Module – 10A

Parameter	Specification Details
Primary Sensor IC	Allegro MicroSystems ACS712
Sensing Engine Mechanism	Linear Hall-Effect Sensor Array
Operating Input Supply	5.0V DC Single Supply (Power LED Indicator Onboard)
Conductor Path Resistance	Low 1.2 mΩ internal resistance path
Output Type Profile	Ratiometric Analog Voltage (0.5V to 4.5V output window)
Zero Current Bias Point	VCC / 2 (Approximately 2.5V DC)
Module Sensitivities	10A Variant: 195 mV/A
Total System Accuracy	1.5% Error Index threshold calibration at room temperature
Physical Dimensions	31.0 mm × 13.0 mm × 13.5 mm low profile

Dual-Axis PS2 Joystick Breakout Module

Parameter	Specification Details
Operating Input Supply	3.3V to 5.0V DC (Logic-level matched to host microcontroller)
Potentiometer Resistance	Dual 10kΩ linear potentiometers (X and Y axes)
Output Type Profile	2 × Analog Voltage Outputs (VRx, VRy) \| 1 × Digital TTL Output (SW)
Center Bias Point	Outputs approximately VCC / 2 when at rest in the center position
Switch Operation Style	Momentary tactile switch (Needs a pull-up resistor, outputs LOW when pressed)
Operational Lifespan	Rated for more than 1,000,000 cycles of structural deflection
Physical Proportions	40.0 mm × 26.0 mm × 32.0 mm

-18%

Raindrop Detection Sensor Module

Technical Specifications

Characteristic	Specification Parameters
Sensor Principle	Resistance-Based Variable Conductivity
Operating Voltage	3.3V to 5.0V DC
Operating Current	~15 mA to 20 mA (Low consumption)
Comparator IC	LM393 Wide-Voltage Operational Amplifier
Sensing Pad Area	Approx. 40 mm × 50 mm (Double-sided FR4 layer)
Output Formats	Digital TTL (0 / 1) and Analog Voltage (AO)

-20%

LDR Light Sensor Module

Characteristic	Specification Parameters
Sensor Principle	Photoconductive Cadmium Sulfide (CdS) Resistance Shifts
Operating Voltage	3.3V to 5.0V DC (Fully logic-compatible)
Current Consumption	~15 mA (Ultra-low standby drain)
Comparator IC Type	LM393 Dual Differential Hardware Comparator
Spectral Peak Sensitivity	~540 nm (Closely matches human eye visibility)
Output Interfacing	Digital TTL (0V / 5V) and Analog Voltage (0V to VCC)