Name: HC-SR501 PIR Motion Sensor Module
SKU: VE-056
Price: 70.00 INR
Availability: InStock

HC-SR501 PIR Motion Sensor Module

Technical Specification Details

Parameter	Specification Details
Sensing IC Hardware Core	BISS0001 Micro Power PIR Motion Detector IC
Operating Voltage Range	4.5V to 20V DC
Quiescent Power Standby	Under 60 µA peak drain
Data Signal Output Level	High: 3.3V TTL \| Low: 0V
Delay Tuning Range	5 Seconds to 300 Seconds (Adjustable)
Blockade Blind Spot Duration	2.5 Seconds default (Prevents repetitive false triggers)
Detection Coverage Distance	3 Meters to 7 Meters maximum (Potentiometer variable)
Operating Temperatures	-15°C to +70°C
Physical Proportions	32 mm × 24 mm × 18 mm

SKU: VE-056 Category: Sensors

Automate your lighting systems and build robust security alarms with the highly popular HC-SR501 PIR Motion Sensor Module. Crowned with a distinctive white Fresnel lens dome, this compact board detects motion by sensing variations in ambient infrared radiation emitted by moving warm bodies. Operating completely independently of ambient light, it features dual onboard potentiometers to manually tune both sensor sensitivity and holding time. It is the ideal, low-cost choice for motion-activated home automation corridors, anti-theft alarms, and custom microcontroller triggers.

Key Product Features

Dual Fine-Tuning Potentiometers: Includes manual dials to adjust detection range from 3 to 7 meters and output delay hold times from 5 to 300 seconds.
Adjustable Jumper Triggers: Features a physical header clip to choose between Single Trigger (L) or Repeatable Trigger (H) modes to match custom scripting logics.
Universal Voltage Headroom: Natively accepts wide DC power supplies ranging from 4.5V to 20V, while pushing out safe, standard 3.3V TTL logic data signals.
Ultra-Low Idle Current Draw: Sips less than 60µA of standby power, making it an energy-efficient peripheral for battery-operated remote nodes.
Wide Detection Aperture: The engineered dome layout focuses light arrays to deliver an expansive 120 to 140-degree cone field of view.

-15%

Click to enlarge

Back to products

Original price was: ₹82.00.Current price is: ₹70.00.

Parameter	Specification Details
Sensing IC Hardware Core	BISS0001 Micro Power PIR Motion Detector IC
Operating Voltage Range	4.5V to 20V DC
Quiescent Power Standby	Under 60 µA peak drain
Data Signal Output Level	High: 3.3V TTL \| Low: 0V
Delay Tuning Range	5 Seconds to 300 Seconds (Adjustable)
Blockade Blind Spot Duration	2.5 Seconds default (Prevents repetitive false triggers)
Detection Coverage Distance	3 Meters to 7 Meters maximum (Potentiometer variable)
Operating Temperatures	-15°C to +70°C
Physical Proportions	32 mm × 24 mm × 18 mm

Compare

Add to wishlist

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “HC-SR501 PIR Motion Sensor Module”

Shipping & Delivery

Related products

-14%

RC522- RFID Smart Card

Sensors

Parameter	Specification Details
Operating Frequency	13.56 MHz High-Frequency (HF)
Chip Architecture Core	MIFARE Classic 1K Compatible (S50)
Memory Capacity	1024 Bytes (1 KB) EEPROM
Storage Structure Layout	16 Sectors (Each sector contains 4 Blocks; 1 Block holds 16 Bytes)
Unique Identification Number	4-Byte Non-Changeable Unique ID (UID)
Communication Protocol	ISO / IEC 14443 Type A Standard
Typical Data Retention	Engineered to hold written data securely for over 10 Years
Sensing Distance Threshold	2 cm to 10 cm (Subject to your reader antenna power profile)
Physical Proportions	85.6 mm × 54.0 mm × 0.8 mm (Standard CR80 Credit Card Size)

Add to cart

Quick view

IR Obstacle Avoidance Sensor Module

Parameter	Specification Details
Operating Voltage Range	3.3V to 5V DC
Output Interface Type	Digital TTL Signal (Outputs LOW on obstacle, HIGH when clear)
Detection Distance	2 cm to 30 cm (Calibrated via potentiometer)
Detection Angle Aperture	35° Cone Field of View
Onboard Chipset Core	LM393 Voltage Comparator IC
Physical Pinouts Array	VCC (Power) \| GND (Ground) \| OUT (Digital Data)
Physical Dimensions	32 mm × 14 mm × 5 mm

Dual-Axis PS2 Joystick Breakout Module

Parameter	Specification Details
Operating Input Supply	3.3V to 5.0V DC (Logic-level matched to host microcontroller)
Potentiometer Resistance	Dual 10kΩ linear potentiometers (X and Y axes)
Output Type Profile	2 × Analog Voltage Outputs (VRx, VRy) \| 1 × Digital TTL Output (SW)
Center Bias Point	Outputs approximately VCC / 2 when at rest in the center position
Switch Operation Style	Momentary tactile switch (Needs a pull-up resistor, outputs LOW when pressed)
Operational Lifespan	Rated for more than 1,000,000 cycles of structural deflection
Physical Proportions	40.0 mm × 26.0 mm × 32.0 mm

PN532 NFC RFID Module V3

Parameter	Specification Details
Core Chipset Architecture	NXP Semiconductors PN532
Radio Frequency Band	13.56 MHz ISM Band
Operating Voltage Supply	3.3V to 5.5V DC (Stable onboard regulation)
Interface Protocol Options	I2C (Default) \| SPI \| High-Speed UART / HSU (115.2kbps)
Communication Range	50 mm to 70 mm maximum (Subject to tag antenna geometry)
NFC Working Modes	Reader/Writer Mode \| Peer-to-Peer Mode \| Card Emulation Mode
Supported Card Protocols	ISO/IEC 14443A \| ISO/IEC 14443B \| FeliCa \| Innovision Jewel
Physical Dimensions	43.0 mm × 40.5 mm × 4.0 mm

-16%

RC522 RFID Card Reader Module Kit

Parameter	Specification Details
Primary Chipset Silicon	NXP Semiconductors MFRC522
Radio Frequency Band	13.56 MHz ISM Proximity Band
Operating Logic Voltage	3.3V DC (Pins are 5V tolerant for signal inputs)
Current Draw Profile	13–26mA (Active read) \| 10–13mA (Idle) \| <80µA (Sleep mode)
Maximum Data Rate	Up to 10 Mbps over the SPI interface protocol
Effective Sensing Range	≥ 50 mm (Subject to tag antenna geometry configurations)
Supported Card Arrays	MIFARE 1 S50 \| MIFARE 1 S70 \| MIFARE Ultralight \| MIFARE Pro
System Interface Bus	Serial Peripheral Interface (SPI) default mode
Physical Proportions	40.0 mm × 60.0 mm compact footprint card layout

TTP223 Capacitive Touch Sensor Module

Parameter	Specification Details
Sensing IC Chipset	TTP223-BA6 TonTouch Capacitive Detector
Operating Voltage Range	2.0V to 5.5V DC
Response Time Max	~60ms at fast mode \| ~220ms at low-power standby mode
Output Logic Mode	Default: Momentary Active-High (Configurable via solder pads)
Current Consumption	Ultra-low 1.5 µA to 3.0 µA baseline power draw
Default Jumper State A	Open: Active-High Output \| Shorted: Active-Low Output
Default Jumper State B	Open: Momentary Switch \| Shorted: Self-Locking / Latching Toggle
Physical Dimensions	15.0 mm × 11.0 mm micro-footprint layout profile

-13%

Parameter	Specification Details
Sensing IC Chipset	TTP223-BA6 TonTouch Capacitive Detector
Operating Voltage Range	2.0V to 5.5V DC
Response Time Max	~60ms at fast mode \| ~220ms at low-power standby mode
Output Logic Mode	Default: Momentary Active-High (Configurable via solder pads)
Current Consumption	Ultra-low 1.5 µA to 3.0 µA baseline power draw
Default Jumper State A	Open: Active-High Output \| Shorted: Active-Low Output
Default Jumper State B	Open: Momentary Switch \| Shorted: Self-Locking / Latching Toggle
Physical Dimensions	15.0 mm × 11.0 mm micro-footprint layout profile

ACS712 Current Sensor Module – 5A

Parameter	Specification Details
Primary Sensor IC	Allegro MicroSystems ACS712
Sensing Engine Mechanism	Linear Hall-Effect Sensor Array
Operating Input Supply	5.0V DC Single Supply (Power LED Indicator Onboard)
Conductor Path Resistance	Low 1.2 mΩ internal resistance path
Output Type Profile	Ratiometric Analog Voltage (0.5V to 4.5V output window)
Zero Current Bias Point	VCC / 2 (Approximately 2.5V DC)
Module Sensitivities	5A Variant: 185 mV/A
Total System Accuracy	1.5% Error Index threshold calibration at room temperature
Physical Dimensions	31.0 mm × 13.0 mm × 13.5 mm low profile