Name: IR Obstacle Avoidance Sensor Module
SKU: VE-051
Availability: InStock

IR Obstacle Avoidance Sensor Module

Technical Specification Details

Parameter	Specification Details
Operating Voltage Range	3.3V to 5V DC
Output Interface Type	Digital TTL Signal (Outputs LOW on obstacle, HIGH when clear)
Detection Distance	2 cm to 30 cm (Calibrated via potentiometer)
Detection Angle Aperture	35° Cone Field of View
Onboard Chipset Core	LM393 Voltage Comparator IC
Physical Pinouts Array	VCC (Power) \| GND (Ground) \| OUT (Digital Data)
Physical Dimensions	32 mm × 14 mm × 5 mm

SKU: VE-051 Category: Sensors

Give your smart devices the ability to detect nearby objects and track edges with this highly reliable IR Obstacle Avoidance Sensor Module. Combining an infrared transmitter and receiver pair, this board works by emitting a steady beam of infrared light. When an object crosses the path, the light bounces back to the receiver, pulling the digital output pin low. Featuring an onboard adjustment potentiometer to fine-tune the sensing range, it is an indispensable choice for robotic obstacle avoidance, automated smart taps, line-following vehicles, and conveyor counter systems.

Key Product Features

Adjustable Detection Range: Features an onboard multi-turn potentiometer knob that allows you to easily calibrate the sensing distance threshold from 2cm up to 30cm.
Visual Status Indicators: Built with dual onboard LEDs—a dedicated light to confirm power supply stability and a secondary indicator that lights up immediately when an obstacle is detected.
Universal Logic Compatibility: Natively supports wide voltage inputs between 3.3V and 5V DC, making it safe to link directly to an Arduino, ESP32, Raspberry Pi, or PIC chip without logic shifters.
Easy Mounting Footprint: Fabricated with a pre-drilled M3 screw hole on the PCB frame, allowing for fast, secure installations into structural robotic chassis or custom housings.

-15%

Click to enlarge

Back to products

Original price was: ₹35.40.Current price is: ₹30.00.

Parameter	Specification Details
Operating Voltage Range	3.3V to 5V DC
Output Interface Type	Digital TTL Signal (Outputs LOW on obstacle, HIGH when clear)
Detection Distance	2 cm to 30 cm (Calibrated via potentiometer)
Detection Angle Aperture	35° Cone Field of View
Onboard Chipset Core	LM393 Voltage Comparator IC
Physical Pinouts Array	VCC (Power) \| GND (Ground) \| OUT (Digital Data)
Physical Dimensions	32 mm × 14 mm × 5 mm

Compare

Add to wishlist

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “IR Obstacle Avoidance Sensor Module”

Shipping & Delivery

Related products

-16%

RC522 RFID Card Reader Module Kit

Sensors

Parameter	Specification Details
Primary Chipset Silicon	NXP Semiconductors MFRC522
Radio Frequency Band	13.56 MHz ISM Proximity Band
Operating Logic Voltage	3.3V DC (Pins are 5V tolerant for signal inputs)
Current Draw Profile	13–26mA (Active read) \| 10–13mA (Idle) \| <80µA (Sleep mode)
Maximum Data Rate	Up to 10 Mbps over the SPI interface protocol
Effective Sensing Range	≥ 50 mm (Subject to tag antenna geometry configurations)
Supported Card Arrays	MIFARE 1 S50 \| MIFARE 1 S70 \| MIFARE Ultralight \| MIFARE Pro
System Interface Bus	Serial Peripheral Interface (SPI) default mode
Physical Proportions	40.0 mm × 60.0 mm compact footprint card layout

Add to cart

Quick view

Dual-Axis PS2 Joystick Breakout Module

Parameter	Specification Details
Operating Input Supply	3.3V to 5.0V DC (Logic-level matched to host microcontroller)
Potentiometer Resistance	Dual 10kΩ linear potentiometers (X and Y axes)
Output Type Profile	2 × Analog Voltage Outputs (VRx, VRy) \| 1 × Digital TTL Output (SW)
Center Bias Point	Outputs approximately VCC / 2 when at rest in the center position
Switch Operation Style	Momentary tactile switch (Needs a pull-up resistor, outputs LOW when pressed)
Operational Lifespan	Rated for more than 1,000,000 cycles of structural deflection
Physical Proportions	40.0 mm × 26.0 mm × 32.0 mm

ACS712 Current Sensor Module – 5A

Parameter	Specification Details
Primary Sensor IC	Allegro MicroSystems ACS712
Sensing Engine Mechanism	Linear Hall-Effect Sensor Array
Operating Input Supply	5.0V DC Single Supply (Power LED Indicator Onboard)
Conductor Path Resistance	Low 1.2 mΩ internal resistance path
Output Type Profile	Ratiometric Analog Voltage (0.5V to 4.5V output window)
Zero Current Bias Point	VCC / 2 (Approximately 2.5V DC)
Module Sensitivities	5A Variant: 185 mV/A
Total System Accuracy	1.5% Error Index threshold calibration at room temperature
Physical Dimensions	31.0 mm × 13.0 mm × 13.5 mm low profile

-13%

TTP223 Capacitive Touch Sensor Module

Parameter	Specification Details
Sensing IC Chipset	TTP223-BA6 TonTouch Capacitive Detector
Operating Voltage Range	2.0V to 5.5V DC
Response Time Max	~60ms at fast mode \| ~220ms at low-power standby mode
Output Logic Mode	Default: Momentary Active-High (Configurable via solder pads)
Current Consumption	Ultra-low 1.5 µA to 3.0 µA baseline power draw
Default Jumper State A	Open: Active-High Output \| Shorted: Active-Low Output
Default Jumper State B	Open: Momentary Switch \| Shorted: Self-Locking / Latching Toggle
Physical Dimensions	15.0 mm × 11.0 mm micro-footprint layout profile

-29%

ACS712 Current Sensor Module – 20A

Parameter	Specification Details
Primary Sensor IC	Allegro MicroSystems ACS712
Sensing Engine Mechanism	Linear Hall-Effect Sensor Array
Operating Input Supply	5.0V DC Single Supply (Power LED Indicator Onboard)
Conductor Path Resistance	Low 1.2 mΩ internal resistance path
Output Type Profile	Ratiometric Analog Voltage (0.5V to 4.5V output window)
Zero Current Bias Point	VCC / 2 (Approximately 2.5V DC)
Module Sensitivities	20A Variant: 100 mV/A
Total System Accuracy	1.5% Error Index threshold calibration at room temperature
Physical Dimensions	31.0 mm × 13.0 mm × 13.5 mm low profile

HC-SR501 PIR Motion Sensor Module

Parameter	Specification Details
Sensing IC Hardware Core	BISS0001 Micro Power PIR Motion Detector IC
Operating Voltage Range	4.5V to 20V DC
Quiescent Power Standby	Under 60 µA peak drain
Data Signal Output Level	High: 3.3V TTL \| Low: 0V
Delay Tuning Range	5 Seconds to 300 Seconds (Adjustable)
Blockade Blind Spot Duration	2.5 Seconds default (Prevents repetitive false triggers)
Detection Coverage Distance	3 Meters to 7 Meters maximum (Potentiometer variable)
Operating Temperatures	-15°C to +70°C
Physical Proportions	32 mm × 24 mm × 18 mm

KY-040 Rotary Encoder Module

Parameter	Specification Details
Operating Input Voltage	3.3V to 5.0V DC (Logic-level matched to your host microcontroller)
Pulses Per Revolution	20 PPR (20 full digital steps per 360° cycle)
Output Data Type	2-Channel Quadrature Digital Output (CLK, DT) \| 1-Channel Push Switch (SW)
Switch Operation Style	Momentary Tactile (Outputs LOW when pressed down, HIGH when at rest)
Onboard Pull-up Array	Dual 10kΩ resistors pre-soldered on data channels
Shaft Profile Construction	High-durability D-shape metal shaft (6mm diameter)
Physical Proportions	32.0 mm × 19.0 mm × 30.0 mm

-20%

LDR Light Sensor Module

Technical Specifications

Characteristic	Specification Parameters
Sensor Principle	Photoconductive Cadmium Sulfide (CdS) Resistance Shifts
Operating Voltage	3.3V to 5.0V DC (Fully logic-compatible)
Current Consumption	~15 mA (Ultra-low standby drain)
Comparator IC Type	LM393 Dual Differential Hardware Comparator
Spectral Peak Sensitivity	~540 nm (Closely matches human eye visibility)
Output Interfacing	Digital TTL (0V / 5V) and Analog Voltage (0V to VCC)