Name: Raspberry Pi 3 Model B+ Case
SKU: VE-026
Price: 300.00 INR
Availability: InStock

Raspberry Pi 3 Model B+ Case

Technical Specification Details

Parameter	Specification Details
Board Compatibility	Raspberry Pi 3 Model B+ \| Raspberry Pi 3 Model B \| Raspberry Pi 2 Model B
Material Construction	High-durability, impact-resistant ABS Plastic
Access Openings	Power, Full HDMI, Audio, Ethernet, 4x USB, MicroSD slot, Dual Camera/Display FPC slots
Assembly Style	5-Piece interlocking snap-fit panel matrix
Ventilation Profile	Passive internal air cavity (Sufficient clearance for low-profile aluminum heatsinks)
Physical Dimensions	96.0 mm × 70.0 mm × 26.0 mm
Product Weight	~50 Grams (unloaded)

Protect and house your single-board computer with the Official Raspberry Pi 3 Model B+ Case. Designed by the Raspberry Pi Foundation to fit the exact physical layout of the Pi 3B+, this premium ABS plastic enclosure features a highly modular, screwless design. The removable side panels and top lid protect your board from dust and accidental shorts while giving you quick, unhindered access to internal headers and ports whenever needed.

Key Product Features

Tool-Free Modular Assembly: Crafted from high-grade, impact-resistant ABS plastic panels that snap together perfectly without a single screw.
Removable Sides and Lid: Features a fully removable top cover and side panels, allowing you to easily route ribbon cables for displays, cameras, or a 40-pin GPIO breakout.
Perfect Ergonomic Pass-Throughs: Precision-molded openings align flawlessly with the Raspberry Pi 3B+ full-sized HDMI port, 4 x USB 2.0 ports, Ethernet jack, Micro-USB power slot, and 3.5mm audio jack.
Light Pipe Integration: Includes precision-molded internal light pipes to cleanly guide the board’s onboard Power and Activity LED indicators to the outside of the case.

-14%

Click to enlarge

Back to products

Original price was: ₹350.00.Current price is: ₹300.00.

Parameter	Specification Details
Board Compatibility	Raspberry Pi 3 Model B+ \| Raspberry Pi 3 Model B \| Raspberry Pi 2 Model B
Material Construction	High-durability, impact-resistant ABS Plastic
Access Openings	Power, Full HDMI, Audio, Ethernet, 4x USB, MicroSD slot, Dual Camera/Display FPC slots
Assembly Style	5-Piece interlocking snap-fit panel matrix
Ventilation Profile	Passive internal air cavity (Sufficient clearance for low-profile aluminum heatsinks)
Physical Dimensions	96.0 mm × 70.0 mm × 26.0 mm
Product Weight	~50 Grams (unloaded)

Compare

Add to wishlist

SKU: VE-026 Category: Batteries, Accessories

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Raspberry Pi 3 Model B+ Case”

Shipping & Delivery

Related products

-33%

LR41 Alkaline Manganese Dioxide Button Cell Battery

Batteries, Accessories

Technical Specifications

Characteristic	Specification Parameters
Battery Chemistry Core	Alkaline Manganese Dioxide (Zn/MnO2 Primary Cell)
Cross-Reference Equivalents	AG3, 392, SR41, G3, LR736, L736, 192, V3GA
Nominal Voltage Output	1.5V DC
Average Energy Capacity	~25 mAh to 32 mAh (Depending on discharge test rates)
Standard Continuous Drain	~0.05 mA to 0.1 mA baseline thresholds
Cell Dimensions	7.9 mm Diameter × 3.6 mm Height
Average Component Weight	Approx. 0.6 grams

Add to cart

Quick view

-15%

12V 7Ah Sealed Lead-Acid Rechargeable Battery

Characteristic	Specification Parameters
Battery Chemistry Core	Sealed Lead Acid (SLA) / AGM VRLA Technology
Nominal System Voltage	12.0V DC
Rated Storage Capacity	7.0 Ah at a standard 20-hour discharge rate
Standby Float Charge Range	13.5V to 13.8V DC at 25°C (Recommended for UPS/Standby)
Cyclic Charging Window	14.4V to 15.0V DC Max (Recommended for Solar/Cyclic)
Maximum Charging Current	2.1A (Exceeding this ceiling causes thermal swelling and gas build-up)
Terminal Connector Block	Standard F2 Faston Tabs (6.35 mm width) or F1 Tabs (4.75 mm width)
Chassis Main Dimensions	Approx. 151 mm × 65 mm × 94 mm (Standard Universal Blocks)
Average Operational Weight	Approx. 2.0 kg to 2.2 kg (Heavy internal lead grid density)

-20%

11.1V 3300mAh Lithium Polymer Battery Pack

Characteristic	Specification Parameters
Battery Chemistry Family	Lithium-Polymer (Li-Po High-Discharge Pouch Matrix)
Cell Configuration Matrix	3S1P (3 Cells wired in Series / 1 in Parallel)
Nominal Pack Voltage	11.1V DC
Full Charge Voltage Ceiling	12.6V DC (4.2V maximum per individual internal cell)
Critical Discharge Limit	9.0V DC (3.0V minimum per cell; lower drops permanently kill capacity)
Total Stored Energy	19.62 Wh (Watt-Hours)
Continuous Discharge Rating	35C (Yields up to 147 Amps of continuous current draw)
Peak Burst Rating	~70C (Instantaneous short duration acceleration current)
Wire & Connector Profile	12 AWG Silicone Wire Lead with XT60 or Deans Connector

Raspberry Pi 5 Active Cooler

Parameter	Specification Details
System Compatibility	Designed exclusively for the Raspberry Pi 5 ecosystem
Material Build	Premium structural-grade Anodized Aluminum
Input Supply Voltage	5V DC supplied via the dedicated 4-pin fan connector
Fan Control Array	Pulse Width Modulation (PWM) with active tachometer loopback
Airflow Volume Rate	Maximum volumetric displacement of 1.09 CFM
Maximum Rotation Speed	8000 RPM (±15%)
Thermal Interfacer	High-performance solid-state pre-cut thermal pads

-23%

18650 Lithium-Ion Rechargeable Battery Cell

Characteristic	Specification Parameters
Battery Chemistry Type	Lithium-Ion (Li-Ion) Cylindrical Cell
Standard Core Sizing	18650 Baseline (Protected layout extended to ~18675 sizing)
Nominal Voltage Rating	3.6V to 3.7V DC
Full Charge Voltage Ceiling	4.2V DC Max
Discharge Cut-off Limit	2.5V to 3.0V DC (Going below this can permanently kill the cell)
Average Capacity Range	1,200 mAh (Budget) up to 3,500+ mAh (Premium cells)
Maximum Discharge Rate	Variable by grade (Typically 1C for storage cells up to 10C+ for power tool cells)

Raspberry Pi Zero Case

Parameter	Specification Details
Board Compatibility	Raspberry Pi Zero \| Raspberry Pi Zero W \| Raspberry Pi Zero 2 W
Material Construction	Impact-resistant, high-durability ABS Plastic
Lid Configuration 1	Solid plain cover for complete dust-proof protection
Lid Configuration 2	Camera mount cover with custom slot to embed a camera module flush
Lid Configuration 3	GPIO breakout cover exposing the full 40-pin array for prototyping
Assembly Profile	Interlocking snap-fit frame alignment matrix
Physical Dimensions	78.8 mm × 37.0 mm × 15.5 mm
Product Weight	~28 Grams (unloaded)

Duracell Alkaline AA 1.5V Battery

The Duracell Alkaline AA 1.5V Battery (commonly searched for via typo as "AA batery durecell") is a high-performance, single-use cylindrical power cell engineered to drive both high-drain electronics and everyday household gadgets. Utilizing premium Alkaline-Manganese Dioxide chemistry, it provides up to 10 times longer lasting power compared to standard zinc-carbon batteries. Recognizable by its iconic "Copper Top" black and bronze design, it serves as the premium power solution across India for digital cameras, motorized toys, game controllers, and flashlights. [1, 2, 3, 4, 5]

✨ Key Features

Duralock Power Preserve Technology: Formulated to lock in chemical energy, guaranteeing a shelf life of up to 10 years in proper storage conditions.
Superior Leakage Prevention: Built with a robust mechanical top closure and specialized anti-corrosion steel casing to prevent dangerous runtime leaks.
High-Drain Optimisation: Capable of supplying consistent voltage without dropping under sudden high-current load pulses.
Wide Thermal Tolerance: Specially designed to operate smoothly across a wide temperature spectrum, maintaining efficiency in extreme environments.

12V Lithium-Ion Battery Pack with DC Barrel Jack

Characteristic	Specification Parameters
Internal Cell Assembly	Lithium-Ion 18650 Format in a 3S arrangement (3 Series)
Nominal System Voltage	11.1V DC to 12.0V DC
Full Charge Peak Ceiling	12.6V DC Max Voltage Profile
Discharge Cut-Off Safety	~9.0V DC BMS Threshold Limit
Popular Capacity Offerings	Ranges of 2000mAh
Interface Port Connector	5.5 mm × 2.1 mm DC Barrel Plug (Center-Positive configuration)
Continuous Discharge Limit	~2A to 5A Continuous Output Current (BMS variant dependent)