Name: Raspberry Pi Zero Case
SKU: VE-024
Price: 250.00 INR
Availability: InStock

Raspberry Pi Zero Case

Technical Specification Details

Parameter	Specification Details
Board Compatibility	Raspberry Pi Zero \| Raspberry Pi Zero W \| Raspberry Pi Zero 2 W
Material Construction	Impact-resistant, high-durability ABS Plastic
Lid Configuration 1	Solid plain cover for complete dust-proof protection
Lid Configuration 2	Camera mount cover with custom slot to embed a camera module flush
Lid Configuration 3	GPIO breakout cover exposing the full 40-pin array for prototyping
Assembly Profile	Interlocking snap-fit frame alignment matrix
Physical Dimensions	78.8 mm × 37.0 mm × 15.5 mm
Product Weight	~28 Grams (unloaded)

Protect and customize your ultra-compact single-board computer with the Official Raspberry Pi Zero Case. Specifically molded for the Raspberry Pi Zero form factor, this high-grade ABS plastic enclosure features a sleek, toolless snap-together assembly. It includes three distinct interchangeable top lids, letting you easily configure your setup for standard protection, camera integration, or access to the 40-pin GPIO array.

Key Product Features

3 Interchangeable Lids Included: Shipped with a solid protective lid, a camera-mount lid with a custom internal clip, and a GPIO-access cut-out lid.
Camera Adapter Cable Included: Includes a specialized mini-FPC camera adapter cable inside the box, letting you link standard Raspberry Pi camera modules directly to the Zero port.
Toolless Snap Assembly: Rigid, high-durability ABS structural panels fit together flawlessly without requiring screws, brackets, or tools.
Perfect Ergonomic Mapping: Precision-cut openings grant clean, low-profile access to the Mini-HDMI, Dual Micro-USB, and MicroSD card slots.

-15%

Click to enlarge

Back to products

Original price was: ₹295.00.Current price is: ₹250.00.

Parameter	Specification Details
Board Compatibility	Raspberry Pi Zero \| Raspberry Pi Zero W \| Raspberry Pi Zero 2 W
Material Construction	Impact-resistant, high-durability ABS Plastic
Lid Configuration 1	Solid plain cover for complete dust-proof protection
Lid Configuration 2	Camera mount cover with custom slot to embed a camera module flush
Lid Configuration 3	GPIO breakout cover exposing the full 40-pin array for prototyping
Assembly Profile	Interlocking snap-fit frame alignment matrix
Physical Dimensions	78.8 mm × 37.0 mm × 15.5 mm
Product Weight	~28 Grams (unloaded)

Compare

Add to wishlist

SKU: VE-024 Category: Batteries, Accessories

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Raspberry Pi Zero Case”

Shipping & Delivery

Related products

Raspberry Pi 5 Active Cooler

Batteries, Accessories

Parameter	Specification Details
System Compatibility	Designed exclusively for the Raspberry Pi 5 ecosystem
Material Build	Premium structural-grade Anodized Aluminum
Input Supply Voltage	5V DC supplied via the dedicated 4-pin fan connector
Fan Control Array	Pulse Width Modulation (PWM) with active tachometer loopback
Airflow Volume Rate	Maximum volumetric displacement of 1.09 CFM
Maximum Rotation Speed	8000 RPM (±15%)
Thermal Interfacer	High-performance solid-state pre-cut thermal pads

Add to cart

Quick view

Raspberry Pi Zero W Case

🔧 Advanced Data Sheet Specifications (For Technical Tabs)

Parameter	Specification Details
Board Compatibility	Raspberry Pi Zero W \| Raspberry Pi Zero 2 W \| Raspberry Pi Zero
Material Construction	Impact-resistant, high-durability ABS Plastic
Lid Configuration 1	Solid plain cover for complete dust-proof protection
Lid Configuration 2	Camera mount cover with custom slot to embed a camera module flush
Lid Configuration 3	GPIO breakout cover exposing the full 40-pin array for prototyping
Assembly Profile	Interlocking snap-fit frame alignment matrix
Physical Dimensions	78.8 mm × 37.0 mm × 15.5 mm
Product Weight	~28 Grams (unloaded)

-20%

Duracell Ultra Alkaline AA 1.5V Battery

Technical Specifications

Characteristic	Specification Parameters
Battery Chemical Profile	Premium High-Performance Alkaline Manganese Dioxide (Zn/MnO₂)
Global Standard Sizing	AA / LR6 / MX1500 / 15A
Nominal Output Voltage	1.5V DC
Internal Static Impedance	~81 m-Ohm @ 1 kHz
Average Rated Capacity	~1,500 mAh down to a 0.8V cut-off threshold
Operating Temperature	Reliable performance from -20°C up to 54°C
Rechargeable Attributes	No (Strictly single-use disposable; attempting to charge may explode)
Average Unit Component Weight	Approx. 24.0 grams to 25.0 grams per cell

11.1V 3300mAh Lithium Polymer Battery Pack

Characteristic	Specification Parameters
Battery Chemistry Family	Lithium-Polymer (Li-Po High-Discharge Pouch Matrix)
Cell Configuration Matrix	3S1P (3 Cells wired in Series / 1 in Parallel)
Nominal Pack Voltage	11.1V DC
Full Charge Voltage Ceiling	12.6V DC (4.2V maximum per individual internal cell)
Critical Discharge Limit	9.0V DC (3.0V minimum per cell; lower drops permanently kill capacity)
Total Stored Energy	19.62 Wh (Watt-Hours)
Continuous Discharge Rating	35C (Yields up to 147 Amps of continuous current draw)
Peak Burst Rating	~70C (Instantaneous short duration acceleration current)
Wire & Connector Profile	12 AWG Silicone Wire Lead with XT60 or Deans Connector

-43%

CR1220 Lithium Manganese Dioxide Coin Cell Battery

Characteristic	Specification Parameters
Battery Chemistry Core	Lithium Manganese Dioxide (LiMnO2) Primary Cell
IEC Standard Designation	CR1220 (Cross-references with DL1220, ECR1220, BR1220)
Nominal Voltage Output	3.0V DC
Average Charge Capacity	35 mAh to 40 mAh
Standard Continuous Drain	0.1 mA
Cell Structural Diameter	12.5 mm
Cell Structural Thickness	2.0 mm
Average Component Weight	Approx. 0.8 grams to 1.0 gram

SanDisk Ultra 64GB MicroSD Memory Card

Parameter	Specification Details
Storage Capacity	64 GB Flash Storage Memory
Form Factor Profile	MicroSD (Extended Capacity)
Bus Interface Speed	UHS-I (Ultra High Speed Class 1)
Performance Classification	Class 10 \| App Performance Class 1 (A1) \| Speed Class 1 (U1)
Sequential Read Speed	Up to 140 MB/s max
Random Read Input/Output	1500 IOPS minimum
Random Write Input/Output	500 IOPS minimum
Filesystem Optimization	Pre-formatted to exFAT standard

Raspberry Pi 4 15.3W USB-C Power Adapter (5.1V 3A)

Specification Details Output Voltage : +5.1 V DC Maximum Current: 3.0 Amps Total Power Capacity: 15.3 Watts Input AC Range: 96V AC to 264V AC (Supports global standards) AC Frequency Range: 50 / 60 Hz (±3Hz) Cable Specifications1.5 Meter Long, 18 AWG Gauge Output Connection: Fixed Captive USB Type-C Connector No-Load Consumption: Less than 0.075 Watts maximum Ripple & Noise: 120 mVp-p maximum Efficiency Rating: Meets Energy Star Level VI high-efficiency standards

-23%

18650 Lithium-Ion Rechargeable Battery Cell

Characteristic	Specification Parameters
Battery Chemistry Type	Lithium-Ion (Li-Ion) Cylindrical Cell
Standard Core Sizing	18650 Baseline (Protected layout extended to ~18675 sizing)
Nominal Voltage Rating	3.6V to 3.7V DC
Full Charge Voltage Ceiling	4.2V DC Max
Discharge Cut-off Limit	2.5V to 3.0V DC (Going below this can permanently kill the cell)
Average Capacity Range	1,200 mAh (Budget) up to 3,500+ mAh (Premium cells)
Maximum Discharge Rate	Variable by grade (Typically 1C for storage cells up to 10C+ for power tool cells)