Name: Arduino Uno R3 SMD
SKU: VE-035
Availability: InStock

Arduino Uno R3 SMD

Technical Specification Details

Parameter	Specification Details
Core Microcontroller	Microchip ATmega328P (Surface-Mount SMD Package)
USB-to-Serial Driver	ATmega16U2 (or CH340 based on exact stock type)
Operating Logic Voltage	5V DC
Input Voltage (Barrel Jack)	7V to 12V DC recommended (Operating limits: 6V to 20V)
Digital I/O Breakout Pins	14 Pins (of which 6 provide hardware PWM output channels)
Analog Input Channels	6 Channels (10-bit resolution Analog-to-Digital Converter)
DC Current per I/O Pin	40 mA maximum
Onboard Flash Memory	32 KB (of which 0.5 KB is utilized by the bootloader code)
SRAM & EEPROM	2 KB SRAM \| 1 KB EEPROM internal
Core Processing Clock	16 MHz Crystal Oscillator
Main Interface Port	USB Type-B Female Connector

SKU: VE-035 Category: Arduino

Kickstart your automation, robotics, and smart electronics projects with the Arduino Uno R3 SMD Edition. Driven by a surface-mounted ATmega328P microcontroller chip, this version offers the exact same layout, processing speed, pinouts, and software compatibility as the standard Uno R3, but at a more budget-friendly price point. Built with a low-profile surface-mount design, it features increased resistance to accidental vibration, making it the perfect, dependable brain for student engineering kits, classroom training modules, and robust embedded hardware setups.

Key Product Features

100% Shield Ecosystem Support: Shares the exact physical footprint and female header alignment as the classic Uno, fitting seamlessly with all standard Arduino shields, sensor modules, and relay boards.
Sleek Low-Profile SMD Design: The surface-mounted processor sits flush on the PCB, eliminating elongated through-hole pins that can bend or short-circuit against metal backplates.
Robust Dual Power Path: Can be powered safely via the standard USB Type-B port or through an external unregulated DC adapter plugged into the onboard 2.1mm center-positive barrel jack.
Massive Learning Ecosystem: Instantly recognized by the official Arduino IDE, allowing you to flash thousands of free open-source software libraries without needing extra programming adapters

-15%

Click to enlarge

Back to products

Original price was: ₹236.00.Current price is: ₹200.00.

Parameter	Specification Details
Core Microcontroller	Microchip ATmega328P (Surface-Mount SMD Package)
USB-to-Serial Driver	ATmega16U2 (or CH340 based on exact stock type)
Operating Logic Voltage	5V DC
Input Voltage (Barrel Jack)	7V to 12V DC recommended (Operating limits: 6V to 20V)
Digital I/O Breakout Pins	14 Pins (of which 6 provide hardware PWM output channels)
Analog Input Channels	6 Channels (10-bit resolution Analog-to-Digital Converter)
DC Current per I/O Pin	40 mA maximum
Onboard Flash Memory	32 KB (of which 0.5 KB is utilized by the bootloader code)
SRAM & EEPROM	2 KB SRAM \| 1 KB EEPROM internal
Core Processing Clock	16 MHz Crystal Oscillator
Main Interface Port	USB Type-B Female Connector

Compare

Add to wishlist

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Arduino Uno R3 SMD”

Shipping & Delivery

Related products

Genuine Arduino Mega 2560 R3 (ATmega16U2 Version)

Arduino

Parameter	Specification Details
Primary Microcontroller	Microchip ATmega2560 (8-bit AVR architecture)
USB-to-Serial Processor	ATmega16U2 (Supports DFU mode and mouse/keyboard emulation configurations)
Operating Logic Voltage	5V DC
Recommended Input DC	7V to 12V Max (Absolute hardware safety boundaries: 6V to 20V)
Digital I/O Breakout Pins	54 Pins (of which 15 deliver true hardware PWM output channels)
Analog Input Channels	16 Channels (10-bit high-accuracy resolution ADC)
DC Current per I/O Pin	20 mA peak tolerance ceiling
Onboard Memory Array	256 KB Flash Storage (of which 8 KB is reserved for bootloader scripts) \| 8 KB SRAM \| 4 KB EEPROM
System Processing Clock	16 MHz Quartz Crystal Oscillator
Physical Dimensions	101.52 mm × 53.3 mm (Standard Mega structural profile

Add to cart

Quick view

Arduino Pro Mini (5V, 16MHz Variant)

Specification Details Technical

Parameter	Specification Details
Core Microcontroller	Microchip ATmega328P (8-bit AVR architecture)
Operating Logic Voltage	5V DC (VCC Pin)
Input Supply Voltage (RAW)	5V to 12V DC max (Via the onboard raw voltage regulator pin)
Digital I/O Breakout Pins	14 Pins (of which 6 provide hardware PWM output channels)
Analog Input Channels	8 Channels (10-bit resolution Analog-to-Digital Converter)
DC Current per I/O Pin	40 mA maximum
Onboard Flash Memory	32 KB (of which 2 KB is reserved for bootloader execution codes)
SRAM & EEPROM Array	2 KB SRAM \| 1 KB EEPROM internal
Core Processing Clock	16 MHz Ceramic Resonator
Programming Interface	6-Pin Standard FTDI / TTL Serial Row Header

Arduino Uno R3 DIP- ATmega328P

Parameter	Specification Details
Core Microcontroller	Microchip ATmega328P (28-pin Dual-Inline DIP Package)
USB-to-Serial Driver	ATmega16U2 (Provides fast native USB communication speeds)
Operating Logic Voltage	5V DC
Input Voltage (Barrel Jack)	7V to 12V DC recommended (Absolute operating limits: 6V to 20V)
Digital I/O Breakout Pins	14 Pins (of which 6 provide hardware PWM output channels)
Analog Input Channels	6 Channels (10-bit resolution Analog-to-Digital Converter)
DC Current per I/O Pin	40 mA maximum
Onboard Flash Memory	32 KB (of which 0.5 KB is utilized by the bootloader code)
SRAM & EEPROM	2 KB SRAM \| 1 KB EEPROM internal
Core Processing Clock	16 MHz Crystal Oscillator
Main Interface Port	USB Type-B Female Connector + 2.1mm DC Barrel Jack

Arduino Uno R4 WiFi Smart Development Board

Parameter	Specification Details
Main Processing MCU	Renesas RA4M1 (32-bit Arm Cortex-M4 with FPU)
Processor Clock Speed	48 MHz
Onboard Flash Memory	256 KB (8x capacity increase over Uno R3)
Internal Static RAM	32 KB SRAM (16x capacity increase over Uno R3)
System Logic Voltage	5V DC Operating Level
Input DC Voltage Range	6V to 24V DC via barrel jack or VIN pin
Digital I/O Breakout	14 Pins (with 6 hardware PWM timing channels)
Analog Peripherals	6 Analog Input Pins (14-bit ADC) \| 1 True Analog Output Pin (12-bit DAC)
HID Communication Mode	Supported (Native Mouse/Keyboard device simulation over USB-C)

Arduino Uno R4 Minima

Parameter	Specification Details
Main Processing MCU	Renesas RA4M1 (32-bit Arm Cortex-M4 with FPU)
Processor Clock Speed	48 MHz
Onboard Flash Memory	256 KB (8x capacity increase over Uno R3)
Internal Static RAM	32 KB SRAM (16x capacity increase over Uno R3)
System Logic Voltage	5V DC Operating Level
Input DC Voltage Range	6V to 24V DC via barrel jack or VIN pin
Digital I/O Breakout	14 Pins (with 6 hardware PWM timing channels)
Analog Peripherals	6 Analog Input Pins (14-bit ADC) \| 1 True Analog Output Pin (12-bit DAC)
HID Communication Mode	Supported (Native Mouse/Keyboard device simulation over USB-C)

Arduino Nano

Parameter	Specification Details
Core Microcontroller Chip	Microchip ATmega328P (Premium 8-bit AVR architecture)
Operating Logic Voltage	5V DC
Recommended Input Voltage	7V to 12V DC input limits via VIN pin
Digital I/O Breakout Pins	14 Pins (6 channels configured for hardware PWM signals)
Analog Read Channels	8 Input Channels (10-bit resolution Analog-to-Digital Converter)
DC Current Current Output	40 mA peak performance per physical I/O pin
Onboard Memory Capacity	32 KB Flash Storage \| 2 KB SRAM \| 1 KB EEPROM
System Processing Clock	16 MHz Crystal Oscillator
Interface Port Type	Mini-B USB Connector Interface
Physical Dimensions	18 mm × 45 mm compact layout profile

Arduino UNO Q 2GB – AI Single Board Computer

Parameter	Specification Details
High-Level MPU Core	Qualcomm® Dragonwing™ QRB2210 (Quad-Core 64-bit ARM® Cortex®-A53 @ 2.0 GHz)
Real-Time MCU Core	STM32U585 (ARM® Cortex®-M33 running up to 160 MHz with 2 MB Flash / 786 KB SRAM)
System Memories	2 GB LPDDR4 RAM + 16 GB onboard eMMC Flash Storage
Operating Systems	Debian Linux (MPU Layer) + Zephyr RTOS with Arduino Core (MCU Layer)
Wireless Interfaces	Dual-Band Wi-Fi 5 (2.4/5GHz) + Bluetooth 5.1 with integrated onboard antennas
USB Bus Routing	Multi-role USB-C with Power Delivery (PD), device switching, and DisplayPort Video Out
Expansion Connectors	Arduino UNO Shields, SparkFun Qwiic (3.3V I2C), MIPI-CSI Camera, and MIPI-DSI Display lines
Logic Working Voltage	3.3V System Logic (Pins are 5V tolerant for backward shield compatibility)
Input DC Power Tolerances	5V/3A over USB-C (Supports Power Delivery) or 7V to 24V DC input via VIN pin

-13%

Official- Arduino Uno R3 DIP

Parameter	Specification Details
Primary Microcontroller	Microchip ATmega328P (Removable DIP Package)
USB-to-Serial Processor	ATmega16U2 (Supports keyboard/mouse emulation configurations)
Operating Logic Voltage	5V DC
Recommended Input DC	7V to 12V Max (Absolute hardware safety thresholds: 6V to 20V)
Digital I/O Breakout Pins	14 Pins (of which 6 deliver true hardware PWM output signals)
Analog Input Channels	6 Channels (10-bit high-accuracy resolution ADC)
DC Current per I/O Pin	40 mA peak tolerance ceiling
Onboard Memory Array	32 KB Flash Storage \| 2 KB SRAM \| 1 KB EEPROM
System Processing Clock	16 MHz Quartz Crystal Oscillator
Physical Dimensions	68.6 mm × 53.4 mm (Standard Uno structural profile)