Name: 12V 7Ah Sealed Lead-Acid Rechargeable Battery
SKU: VE-148
Price: 700.00 INR
Availability: InStock

12V 7Ah Sealed Lead-Acid Rechargeable Battery

Technical Specifications

Characteristic	Specification Parameters
Battery Chemistry Core	Sealed Lead Acid (SLA) / AGM VRLA Technology
Nominal System Voltage	12.0V DC
Rated Storage Capacity	7.0 Ah at a standard 20-hour discharge rate
Standby Float Charge Range	13.5V to 13.8V DC at 25°C (Recommended for UPS/Standby)
Cyclic Charging Window	14.4V to 15.0V DC Max (Recommended for Solar/Cyclic)
Maximum Charging Current	2.1A (Exceeding this ceiling causes thermal swelling and gas build-up)
Terminal Connector Block	Standard F2 Faston Tabs (6.35 mm width) or F1 Tabs (4.75 mm width)
Chassis Main Dimensions	Approx. 151 mm × 65 mm × 94 mm (Standard Universal Blocks)
Average Operational Weight	Approx. 2.0 kg to 2.2 kg (Heavy internal lead grid density)

The 12V 7Ah Sealed Lead-Acid (SLA) Rechargeable Battery is a high-capacity, valve-regulated lead-acid (VRLA) power cube designed for reliable backup power and heavy cyclic systems. Utilizing advanced Absorbent Glass Mat (AGM) technology, the internal acid electrolyte is fully suspended in ultra-fine fiberglass separators, making the unit completely spill-proof, leak-free, and maintenance-free with no water top-ups required. It is the gold standard baseline energy storage block across India for desktop UPS systems, home inverter modules, solar street lights, automated gate systems, and electronic sprayer pumps.

✨ Key Features

Spill-Proof VRLA Construction: Features a rugged, heavy-duty ABS plastic case that allows the battery to operate safely in any physical layout or orientation without leaking acid.
Gas Recombination Engine: Incorporates an internal plate matrix that automatically recombines hydrogen and oxygen gases generated during charging, eliminating outgassing risks under normal conditions.
Excellent Deep-Discharge Recovery: Heavy-duty lead-calcium grids ensure long storage life and high structural integrity, allowing the battery to bounce back reliably after extended power blackouts.
Standard F1/F2 Faston Terminals: Outfitted with heavy flat spade terminals (typically Type F2 or F1) for immediate, high-conductivity slide-on wire connector hookups

-15%

12v-7.5ah-rechargeable-lead-acid-battery-400x400

Click to enlarge

Back to products

Original price was: ₹820.00.Current price is: ₹700.00.

Characteristic	Specification Parameters
Battery Chemistry Core	Sealed Lead Acid (SLA) / AGM VRLA Technology
Nominal System Voltage	12.0V DC
Rated Storage Capacity	7.0 Ah at a standard 20-hour discharge rate
Standby Float Charge Range	13.5V to 13.8V DC at 25°C (Recommended for UPS/Standby)
Cyclic Charging Window	14.4V to 15.0V DC Max (Recommended for Solar/Cyclic)
Maximum Charging Current	2.1A (Exceeding this ceiling causes thermal swelling and gas build-up)
Terminal Connector Block	Standard F2 Faston Tabs (6.35 mm width) or F1 Tabs (4.75 mm width)
Chassis Main Dimensions	Approx. 151 mm × 65 mm × 94 mm (Standard Universal Blocks)
Average Operational Weight	Approx. 2.0 kg to 2.2 kg (Heavy internal lead grid density)

Compare

Add to wishlist

SKU: VE-148 Category: Batteries, Accessories

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “12V 7Ah Sealed Lead-Acid Rechargeable Battery”

Shipping & Delivery

Related products

Raspberry Pi 4 Protective Case

Batteries, Accessories

Technical Specification Details

Parameter	Specification Details
Compatibility	Designed exclusively for Raspberry Pi 4 Model B (1GB, 2GB, 4GB, and 8GB variants)
Material Construction	High-durability, impact-resistant ABS Plastic
Access Openings	Power, Dual Display, Audio, Dual Camera/Display FPC slots, MicroSD slot, Activity LEDs
Assembly Style	3-Piece Snap-fit interlocking matrix
Ventilation Profile	Passive internal air cavity layout (Sufficient clearance for low-profile heatsinks)
Physical Dimensions	97.0 mm × 70.0 mm × 25.0 mm
Product Weight	~46 Grams (unloaded)

Add to cart

Quick view

12V 5A DC Power Adapter

Characteristic	Specification Parameters
Input AC Voltage Range	100V AC to 240V AC (Standard Indian Single-Phase Mains)
Input AC Frequency	50 Hz / 60 Hz
Output DC Voltage	12V DC Fixed
Maximum Output Current	5.0 Amperes (5000 mA) Continuous
Total Rated Power Capacity	60 Watts Max
Connector Dimension Profile	Standard 5.5 mm (Outer Diameter) × 2.1 mm or 2.5 mm (Inner Pin)
Connector Core Polarity	Center-Positive (Inner sleeve (+), Outer ring (-))
Form Factor Style	Desktop Type (requires a 3-pin IEC C13 or C5 AC power cord)

Raspberry Pi 5 27W USB-C Power Adapter

Parameter Specification Details Primary Output (Pi 5 Exclusive Mode) : 5.1V DC @ 5.0A (Max Power Capacity: 25.5W) Alternative Standard PD Output Modes :9.0V @ 3.0A Input AC Range: 100V AC to 240V AC (50/60 Hz global compatibility) Cable Specifications: 1.2 Meter captive length, heavy-duty 17/18 AWG low-resistance wire Output Connection Interface: Fixed USB Type-C Connector with extended structural neck Protections Built-in: Complete Overcurrent, Overvoltage, and Short-Circuit physical trip paths Efficiency Certification: Meets international Energy Star Level VI benchmarks

SanDisk Ultra 64GB MicroSD Memory Card

Parameter	Specification Details
Storage Capacity	64 GB Flash Storage Memory
Form Factor Profile	MicroSD (Extended Capacity)
Bus Interface Speed	UHS-I (Ultra High Speed Class 1)
Performance Classification	Class 10 \| App Performance Class 1 (A1) \| Speed Class 1 (U1)
Sequential Read Speed	Up to 140 MB/s max
Random Read Input/Output	1500 IOPS minimum
Random Write Input/Output	500 IOPS minimum
Filesystem Optimization	Pre-formatted to exFAT standard

-33%

LR41 Alkaline Manganese Dioxide Button Cell Battery

Characteristic	Specification Parameters
Battery Chemistry Core	Alkaline Manganese Dioxide (Zn/MnO2 Primary Cell)
Cross-Reference Equivalents	AG3, 392, SR41, G3, LR736, L736, 192, V3GA
Nominal Voltage Output	1.5V DC
Average Energy Capacity	~25 mAh to 32 mAh (Depending on discharge test rates)
Standard Continuous Drain	~0.05 mA to 0.1 mA baseline thresholds
Cell Dimensions	7.9 mm Diameter × 3.6 mm Height
Average Component Weight	Approx. 0.6 grams

-17%

12V 1.2Ah Sealed Lead-Acid Rechargeable Battery

Characteristic	Specification Parameters
Battery Chemistry Core	Sealed Lead Acid (SLA) / AGM VRLA Technology
Nominal System Voltage	12.0V DC
Rated Storage Capacity	1.2 Ah at a standard 20-hour discharge rate
Standby Float Charge Range	13.5V to 13.8V DC at 25°C
Cyclic Charging Window	14.4V to 15.0V DC Max
Maximum Charging Current	0.36A (Too much charging current causes thermal swelling)
Terminal Connector Block	Standard F1 Faston Tabs (4.75 mm / 0.187 inch width)
Chassis Main Dimensions	Approx. 97 mm × 43 mm × 52 mm (Standard Pocket Box Size)
Average Operational Weight	Approx. 0.55 kg (1.21 lbs)

-20%

Duracell Alkaline AA 1.5V Battery

The Duracell Alkaline AA 1.5V Battery (commonly searched for via typo as "AA batery durecell") is a high-performance, single-use cylindrical power cell engineered to drive both high-drain electronics and everyday household gadgets. Utilizing premium Alkaline-Manganese Dioxide chemistry, it provides up to 10 times longer lasting power compared to standard zinc-carbon batteries. Recognizable by its iconic "Copper Top" black and bronze design, it serves as the premium power solution across India for digital cameras, motorized toys, game controllers, and flashlights. [1, 2, 3, 4, 5]

Duralock Power Preserve Technology: Formulated to lock in chemical energy, guaranteeing a shelf life of up to 10 years in proper storage conditions.
Superior Leakage Prevention: Built with a robust mechanical top closure and specialized anti-corrosion steel casing to prevent dangerous runtime leaks.
High-Drain Optimisation: Capable of supplying consistent voltage without dropping under sudden high-current load pulses.
Wide Thermal Tolerance: Specially designed to operate smoothly across a wide temperature spectrum, maintaining efficiency in extreme environments.

Raspberry Pi Zero W Case

🔧 Advanced Data Sheet Specifications (For Technical Tabs)

Parameter	Specification Details
Board Compatibility	Raspberry Pi Zero W \| Raspberry Pi Zero 2 W \| Raspberry Pi Zero
Material Construction	Impact-resistant, high-durability ABS Plastic
Lid Configuration 1	Solid plain cover for complete dust-proof protection
Lid Configuration 2	Camera mount cover with custom slot to embed a camera module flush
Lid Configuration 3	GPIO breakout cover exposing the full 40-pin array for prototyping
Assembly Profile	Interlocking snap-fit frame alignment matrix
Physical Dimensions	78.8 mm × 37.0 mm × 15.5 mm
Product Weight	~28 Grams (unloaded)